Beta UniFi Access Point 7.2 x NUR U7 Pro/Pro-Wall/Pro-Max/Outdoor

Es gibt 6 Antworten in diesem Thema, welches 925 mal aufgerufen wurde. Der letzte Beitrag () ist von BlackSpy.

    UniFi Access Point 7.2.12

    https://community.ui.com/releases/UniFi-Access-Point-7-2-12/27ead719-04db-4368-8209-fa2634318727


    Overview

    The U7 Pro Max firmware release introduces enhancements for MLO mode and improvements to 2.4 GHz connectivity.

    Improvements

    • Enhanced MLO (Multi-Link Operation) connectivity and overall performance.
    • Further improvements to 2.4 GHz connectivity for greater reliability.
    • Optimized connectivity across 5 GHz and 6 GHz bands.
    • Refined 5 GHz auto-channel selection for improved network efficiency.
    • Better connectivity performance in low-signal conditions.
    • Updated regulatory compliance for Australia and Brazil.

    Known issues

    Note: MLO mode with WPA3 Enterprise may experience connectivity issues specifically with the Samsung Galaxy S24 Ultra.

    Additional information

    • Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
    • If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

    If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

    • AP model(s)
    • Previous AP release version
    • UniFi Network application version
    • Please post a support file as well

    Download links

    U7-Pro-Max | md5sum | sha256sum

    UniFi Access Point 7.2.13

    https://community.ui.com/releases/UniFi-Access-Point-7-2-13/900c36ff-848f-4fa2-9e6b-549359e32f16


    Overview

    The U7 Pro Max firmware release introduces enhancements for 2.4 GHz connectivity.

    Improvements

    • Improved stability.
    • Further improvements to 2.4 GHz connectivity for greater reliability.

    Known issues

    Note: MLO mode with WPA3 Enterprise may experience connectivity issues specifically with the Samsung Galaxy S24 Ultra.

    Additional information

    • Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
    • If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

    If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

    • AP model(s)
    • Previous AP release version
    • UniFi Network application version
    • Please post a support file as well

    Download links

    U7-Pro-Max | md5sum | sha256sum

    Gefällt mir 2

  • BlackSpy

    Hat den Titel des Themas von „Beta UniFi Access Point 7.2 x NUR U7 Pro Max !“ zu „Beta UniFi Access Point 7.2 x NUR U7 Pro/Pro-Wall/Pro-Max/Outdoor“ geändert.
    • Neu

    UniFi Access Point 7.2.16

    https://community.ui.com/releases/UniFi-Access-Point-7-2-16/02cdfb7e-fc00-4e8e-8c5f-879f8db4300e


    Improvements

    • Improved SSID broadcasting functionality when MLO mode is enabled.
    • Improved tracking of client connectivity.

    Bugfixes

    • Fixed client-to-client communication when connected to the same access point (AP) using the same SSID and band.
    • Fixed an issue where the Samsung Galaxy S24 Ultra was unable to connect to a WPA3-EAP SSID with dynamic VLAN assignment and MLO enabled.
    • Fixed an issue causing the client to become unresponsive after extended use.

    Additional information

    NOTE: For best connectivity and roaming experience when using MLO (Multi-Link Operation) mode it's recommended to use WPA3 or WPA3 Enterprise security mode.

    ———

    Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

    • If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

    If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

    • AP model(s)
    • Previous AP release version
    • UniFi Network application version

    Download links

    U7-Pro | U7-Pro-Wall | U7-Pro-Max | md5sum | sha256sum

    U7-Outdoor | md5sum | sha256sum

    • Neu

    Die 7.1.x und 7.2.x zielen mehr auf die Unterstützung von MLO.

    Hat daher nicht viel mit IoT, wie zB deinem Fernseher, zu tun.

    Am Ende werden alle Zweige zusammengeführt

    • Neu

    UniFi Access Point 7.2.17

    https://community.ui.com/releases/UniFi-Access-Point-7-2-17/0ce44788-4b53-4b2c-a225-a8cbd0e2ec91


    Improvements

    • Improved 6GHz lower band frequency performance for the U7-Pro.
    • Improved 6GHz Auto channel selection algorithm.

    Known issues

    • Enabling MLO from the UniFi mobile app (iOS) causes WPA3-Enterprise security mode to be switched to WPA3.

    Additional information

    NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

    NOTE: It's strongly recommended to have separate Wireless Networks for IoT devices and for MLO capable clients. Enforcing WPA3 security mode will break connection to the most IoT equipment not supporting it.

    ———

    Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

    • If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

    If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

    • AP model(s)
    • Previous AP release version
    • UniFi Network application version

    Download links

    U7-Pro | U7-Pro-Wall | U7-Pro-Max | md5sum | sha256sum

    U7-Outdoor | md5sum | sha256sum