Neu im Shop bei UI: G3 Reader/Pro/Flex Starter Kit (Apple Wallet support)

**BlackSpy** · January 10, 2025 at 12:29 PM

G3 Reader
UA-G3-B

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

125,00 €

150,00 € VAT incl.

Compact third-generation access reader with Apple Touch Pass support.

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Unlock with an NFC card, UniFi Identity mobile app, or Touch Pass

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Supports hand-wave unlocking as a request-to-exit device

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Provides entry and exit greeting messages

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

IP55-rated weather resistance (-30 to 45°C)

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Connects to UniFi Access Hub via PoE

Dimensions	93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
Weight	82 g (2.9 oz)
Enclosure material	Polycarbonate, glass
Mounting material	Aluminum alloy
Mounting	In wall, gang box
Weatherproofing	IP55
Networking interface	(1) 10/100 MbE RJ45 port
Connectivity	BLE 4.1 NFC
Power method	PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range	48V DC
Max. power consumption	5W
ESD/EMP protection	Air: ±15kV, contact: ±8kV
Sensors	Proximity sensor
Speaker	(1) 8 ohm, 0.7W
LEDs	(1) Status light (Learn more)
Button	(1) Factory-reset
NFC frequency	13.56 MHz
NFC read range	< 30 mm
NFC technology	ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0
Operating environment	Outdoor use
Ambient operating temperature	-30 to 45° C (-22 to 113° F)
Ambient operating humidity	5 to 90% noncondensing
Software information	The software version of a product can be checked at https://unifi.ui.com
UL 294 level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
UL 294 statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements	Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ² ) for patch cords; 24 AWG (0.21 mm ² ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level	UA-G3, V01
Management application	UniFi Access: Version 3.0.15 and later

**BlackSpy** · January 10, 2025 at 12:31 PM

G3 Reader Pro
UA-G3-Pro-B

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

325,00 €

390,00 € VAT incl.

Third-generation, indoor/outdoor NFC reader and intercom with Apple Touch Pass support.

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Unlock using the NFC card, PIN, UniFi Identity mobile app, face unlock and Touch Pass

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Doorbell for unlock with video of visitor and two-way intercom

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Video works at ADA-compliant mounting height

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

IP55-rated weather resistance (-10 to 45° C)

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Connects to UniFi Access Hub using Poe

Dimensions	160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6")
Weight	136 g (4.8 oz)
Enclosure material	Polycarbonate, glass
Mount material	Aluminum alloy
Mounting	Wall mount (Included) Gangbox mount (Included) Angle mount (Optional) Junction box (Optional)
Weatherproofing	IP55
Networking interface	(1) GbE RJ45 port
Connectivity	BLE 4.2 NFC
Power method	PoE
Supported voltage range	48V DC
Max. power consumption	6W
ESD/EMP protection	Air: ±15kV, contact: ±8kV
Sensor	Proximity sensor
Camera view angle	H: 96.67°, V: 123.15°, D: 153.11°
Microphone	Yes
Speaker	(1) 4 ohm, 1.5W
LEDs	R/G/B/W/Amber (Learn more)
Button	(1) Factory-reset
NFC frequency	13.56 MHz
NFC read range	< 30 mm
NFC technology	ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0
Operating environment	Outdoor use
Ambient operating temperature	Device: -30 to 45° C (-22 to 113° F) Display:* -10 to 45° C (14 to 113° F) *The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v1.3.28)
Ambient operating humidity	5 to 90% noncondensing
Certifications	CE, FCC, IC
Management application	UniFi Access: Version 3.0.15 and later

**BlackSpy** · January 10, 2025 at 12:33 PM

Reader Flex
UA-G3-Flex-B

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

165,00 €

198,00 € VAT incl.

Third-generation NFC card reader with a keypad and Apple Touch Pass support.

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Unlock with the keypad, NFC card, UniFi Identity mobile app, or Touch Pass

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Provides entry and exit greeting messages

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

IP55-rated weather resistance (-30 to 60°C)

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

Connects to UniFi Access Hub via PoE

Dimensions	84 x 84 x 40.8 mm (3.3 x 3.3 x 1.6")
Weight	165 g (5.8 oz)
Enclosure material	Polycarbonate, glass, aluminium alloy
Mounting material	Polycarbonate, aluminum alloy
Mounting	Wall, gang box, junction box
Weatherproofing	IP55
Networking interface	(1) 10/100 MbE RJ45 port
Connectivity	BLE 4.1 NFC
Power method	PoE
Supported voltage range	44–57V DC
Max. power consumption	5W
Sensor	(12) Capacitive buttons
Speaker	(1) 8 ohm, 1W
LEDs	(1) Status light (12) Keys backlight
Button	(1) Factory-reset
NFC frequency	13.56 MHz
NFC read range	< 30 mm
NFC technology	ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0
Operating environment	Outdoor use
Ambient operating temperature	-30 to 60° C (-22 to 140° F)
Ambient operating humidity	5 to 90% noncondensing
Software information	The software version of a product can be checked at https://unifi.ui.com
Certifications	CE, FCC, IC
Document number, and issue date and/or revision level	UA-G3-Flex V01
Management application	UniFi Access: Version 3.0.15 and later

**BlackSpy** · January 10, 2025 at 12:34 PM

G3 Starter Kit Pro
UA-G3-SK-Pro

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

519,00 €

622,80 € VAT incl.

Starter kit that provides complete entry and exit control for a single door with two readers and Apple Touch Pass support.

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

(1) Door Hub

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

(1) G3 Reader Pro

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

(1) G3 Reader for door exit, or entry for an additional door (second Hub required)

External Content assets.ecomm.ui.com

Content embedded from external sources will not be displayed without your consent.

(2) Pocket Keyfobs

Dimensions

174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3")

Weight

363 g (12.8 oz)

Enclosure material

Polycarbonate

Mounting material

Polycarbonate

Networking interface

(5) 10/100/1000 Base-T

Power method

PoE++

UL 294 Power-limited Class 2 PSU

UL 60950-1/62368-1 LPS/PS2 PSU

Max. power consumption

Without PoE output: 30W

With PoE output: 50W

PoE input

50V DC, 1A

PoE output

PoE passthrough, (4) PoE, 50V DC, total 20W

LEDs

White/blue (Learn more)

Button

(1) Factory-reset

Digital input

Request to exit/request to enter/remote release/door position sensor

Dry output relay

Lock: 30V DC, 1A

Aux: 30V DC, 1A

Powered output relay

Lock: 12V DC, 1A

Aux: 12V DC, 0.33A

12V DC, 0.33A

Operating environment

Indoor use only

Ambient operating temperature

0 to 40° C (32 to 104° F)

Ambient operating humidity

5 to 95% noncondensing

UL 294 level

Destructive attack: Level I

Line security: Level I

Endurance: Level I

Standby power: Level I

UL 294 statement

Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.

The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 Grade

Grade assignment: 1

Certifications

CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Wiring gauge requirements (AWG)

Total length to device	Output load current at 12V DC
Total length to device	100mA	250mA	500mA	1A
6.1 m (20 ft)	22	22	22	18
15.2 m (50 ft)	22	22	22	18
30.5 m (100 ft)	22	22	18	18

UACC-Cable-DoorLockRelay (18 AWG) is recommended.

PoE cabling requirements

The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm ² ) for horizontal or riser cable.

Dimensions

160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6")

Weight

136 g (4.8 oz)

Enclosure material

Polycarbonate, glass

Mount material

Aluminum alloy

Mounting

Wall mount (Included)

Gangbox mount (Included)

Angle mount (Optional)

Junction box (Optional)

Weatherproofing

IP55

Networking interface

(1) GbE RJ45 port

Connectivity

BLE 4.2

NFC

Power method

PoE

UL 294 Power-limited Class 2 PSU

UL 60950-1/62368-1 LPS/PS2 PSU

Supported voltage range

48V DC

Max. power consumption

6W

ESD/EMP protection

Air: ±15kV, contact: ±8kV

Sensor

Proximity sensor

Camera view angle

H: 96.67°, V: 123.15°, D: 153.11°

Microphone

Yes

Speaker

(1) 4 ohm, 1.5W

LEDs

R/G/B/W/Amber

Flash

Button

(1) Factory-reset

NFC frequency

13.56 MHz

NFC read range

< 30 mm

NFC technology

ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)

MIFARE Classic / MIFARE DESFIRE

Sony FeliCa™ (ID only)

NFC Forum tags T1T, T2T, T3T, T4T and T5T

ECP 2.0

Operating environment

Outdoor use

Ambient operating temperature

Device: -30 to 45° C (-22 to 113° F)

Display:* -10 to 45° C (14 to 113° F)

*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v1.3.28)

Ambient operating humidity

5 to 90% noncondensing

Software information

The software version of a product can be checked at https://unifi.ui.com

UL 294 level

Destructive attack: Level I

Line security: Level I

Endurance: Level I

Standby power: Level I

UL 294 statement

Compliance with IEEE 802.3 specifications was not verified as part of UL 294.

The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

PoE cabling requirements

Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.

The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ² ) for patch cords; 24 AWG (0.21 mm ² ) for horizontal or riser cable.

CAN/ULC-60839-11-1 Grade

Grade assignment: I

Certifications

CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

System

Steady blue: Adopted/device is ready

Steady white: Pending adoption

Blinking white/blue: Upgrading firmware

Strobing red: Emergency lockdown

Steady orange: Display over or under operation temperature

Dimensions

93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")

Weight

82 g (2.9 oz)

Enclosure material

Polycarbonate, glass

Mounting material

Aluminum alloy

Mounting

In wall, gang box

Weatherproofing

IP55

Networking interface

(1) 10/100 MbE RJ45 port

Connectivity

BLE 4.1

NFC

Power method

PoE

UL 294 Power-limited Class 2 PSU

UL 60950-1/62368-1 LPS/PS2 PSU

Supported voltage range

48V DC

Max. power consumption

5W

ESD/EMP protection

Air: ±15kV, contact: ±8kV

Sensors

Proximity sensor

Speaker

(1) 8 ohm, 0.7W

LEDs

Steady white: Pending adoption

Steady blue: Adopted

Alternating white/blue: Firmware updating

Strobing red: Emergency lockdown

Steady green: Emergency evacuation

(2) Rapid flashing blue: NFC credential authenticated

(2) Rapid flashing red: NFC credential authentication failed

Breathing blue: Ready to register NFC cards

Button

(1) Factory-reset

NFC frequency

13.56 MHz

NFC read range

< 30 mm

NFC technology

ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)

MIFARE Classic / MIFARE DESFIRE

Sony FeliCa™ (ID only)

NFC Forum tags T1T, T2T, T3T, T4T and T5T

ECP 2.0

Operating environment

Outdoor use

Ambient operating temperature

-30 to 45° C (-22 to 113° F)

Ambient operating humidity

5 to 90% noncondensing

Software information

The software version of a product can be checked at https://unifi.ui.com

UL 294 level

Destructive attack: Level I

Line security: Level I

Endurance: Level I

Standby power: Level I

UL 294 statement

Compliance with IEEE 802.3 specifications was not verified as part of UL 294.

The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

PoE cabling requirements

Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.

The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ² ) for patch cords; 24 AWG (0.21 mm ² ) for horizontal or riser cable.

CAN/ULC-60839-11-1 Grade

Grade assignment: I

Certifications

CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Dimensions

84 x 39 x 7.4 mm (3.3 x 1.5 x 0.3")

Weight

16 g (0.56 oz)

Enclosure material

Polycarbonate, stainless steel, silicone rubber

Weatherproofing

IP54

NFC frequency

13.56 MHz

NFC technology

ISO/IEC 14443 Type A

MIFARE DESFire EV3 4K

UniFi Access Proprietary Security Protocol

Ambient operating temperature

-10 to 45° C (14 to 113° F)

Ambient operating humidity

10 to 90% noncondensing

Certification

CE

Participate now!