Beta UniFi Access Point 8.0.x (alle U7 und E7)

https://community.ui.com/releases/UniFi…dc-76543b78d057

**BlackSpy** · February 10, 2025 at 9:02 PM

UniFi Access Point 8.0.9

Bugfixes

Fixed the "No SSID Broadcast" issue after an Airtime scan.
Fixed the "No SSID Broadcast" issue when Beacon Country is enabled (from the Legacy interface).
Fixed the "No SSID Broadcast" issue when anonymous analytics is disabled.
Fixed a connectivity issue for 6 GHz-only SSIDs.
Fixed MLO compatibility issues with dual-port APs.
Fixed client VLAN override when a non-default VLAN network is assigned to a Wireless network and MLO is enabled.
Fixed an issue causing inter-client communication to drop.
Fixed automatic channel selection in outdoor mode.
Fixed cloud connectivity for some IoT devices.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version

Download links

https://community.ui.com/releases/UniFi…03-aeae2332136f

**BlackSpy** · February 21, 2025 at 5:20 AM

UniFi Access Point (all U7 and E7 models) 8.0.14

Improvements

Improved 6 GHz stability.
Improved AP stability.

Bugfixes

Fixed Network System Log listing 'Last Connected' signal as 0 dBm for all clients.
[E7/E7 Campus] Fixed repeated "AP is not authorized for 6 GHz Extended Range" toasts when 6 GHz Extended Range is enabled.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version

Download links

https://community.ui.com/releases/UniFi…62-29d4aea5c143

**BlackSpy** · February 27, 2025 at 5:22 AM

UniFi Access Point (all U7 and E7 models) 8.0.16

Improvements

Improved client connectivity.
Improved stability.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version
UniFi Console Support File (as private attachment)

Download links

https://community.ui.com/releases/UniFi…2f-baa2c86ce003

**BlackSpy** · March 1, 2025 at 7:13 AM

UniFi Access Point (all U7 and E7 models) 8.0.19

Bugfixes

Fixed an AP crash issue during client roaming when MLO and Proxy ARP are enabled.
Fixed an issue with USP-Strip and USP-Plug Auto-Link discovery.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version
UniFi Console Support File (as private attachment)

Download links

https://community.ui.com/releases/UniFi…56-949815f7ab6e

**BlackSpy** · March 10, 2025 at 6:57 PM

UniFi Access Point (all U7 and E7 models) 8.0.20

Improvements

Improved AP stability.
Improved client connectivity on 6 GHz band.
Updated regulatory information for Brazil.
Enabled wireless meshing for U7/E7 (with MLO enabled) to Wi-Fi 6/5 APs

Bugfixes

Fixed empty airtime scan results for the 6 GHz band when operating in 320 MHz bandwidth.
Fixed corrupted packet capture data.
Fixed crash during Packet Capture.
Fixed increased CPU usage when SNMP monitoring is enabled.

Known issues

Dynamic VLANs are broken after Airtime Scan or Channel Optimization
Meshing fails after Airtime Scan or Channel Optimization

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version
UniFi Console Support File (as private attachment)

Download links

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-0-23/36dea4c7-ba86-4085-a998-db78727193aa

U7-Lite | U7-In-Wall | md5sum | sha256sum

**BlackSpy** · March 19, 2025 at 10:53 AM Official Post

UniFi Access Point (all U7 and E7 models) 8.0.23

Improvements

Improved AP stability.
Improved some IoT clients connectivity.

Bugfixes

Fixed meshing failures occurring after Airtime Scan or Channel Optimization.
Fixed an issue with dynamic VLAN assignment after Airtime Scan or Channel Optimization.
Fixed RADIUS CoA not working in some environments.
Fixed Intel AX210 wireless authentication failures over 6GHz (WPA3) on Linux.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version
UniFi Console Support File (as private attachment)

Download links

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-0-26/a653d95d-9415-4164-986f-7525902622c1

**BlackSpy** · April 1, 2025 at 7:29 PM Official Post

UniFi Access Point (all U7 and E7 models) 8.0.26

Improvements

Improved wireless client roaming.
Improved AP stability.
Improved client connectivity.
Updated regulatory for Indonesia.

Bugfixes

Fixed an issue where the AP stopped broadcasting when channels 12–13 were set for the 2.4GHz band in the United Kingdom.
Fixed wireless network scheduler.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version
UniFi Console Support File (as private attachment)

Download links

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-0-27/c77d73f7-987c-4345-a3a4-049c771f0079

**BlackSpy** · April 8, 2025 at 7:36 PM Official Post

UniFi Access Point (all U7 and E7 models) 8.0.27

Improvements

Improved client connectivity in MLO mode.
Improved meshing performance in dense environments.
Improved AP stability.

Bugfixes

Fixed Zero Wait DFS functionality. Seamless channel change.
Fixed an issue where Multicast and Broadcast Control did not properly block traffic between clients connected to the same AP and on the same band.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version
UniFi Console Support File (as private attachment)

Download links

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-0-28/017bb2ea-e2d2-456f-ad23-c15cd6af17f0

**BlackSpy** · April 14, 2025 at 4:20 PM Official Post

UniFi Access Point (all U7 and E7 models) 8.0.28

Improvements

Improved airtime utilization on the 5 GHz band.
Improved client roaming when connected in MLO mode.

Bugfixes

Fixed various reporting issues.
Fixed meshing issues.
Fixed an IPv6 RA VLAN leak between clients on the same AP.
Fixed an airtime scan issue that caused outdoor APs to get stuck, requiring a reboot to restore functionality.
Fixed an issue where multicast and broadcast control did not work until the AP was rebooted after being enabled or disabled.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version
UniFi Console Support File (as private attachment)

Download links

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-0-31/e0cfae0b-5fc3-4023-9efe-cbf2036c1b8b

**BlackSpy** · April 18, 2025 at 8:57 AM Official Post

UniFi Access Point (all U7 and E7 models) 8.0.31

Improvements

Improved WiFi Throughput.
Updated regulatory information for E7-Campus-US
For continued use of 6 GHz, indoors or outdoors, AFC must be enabled.

Bugfixes

Fixed a regression in which IPv6 Router Advertisements were not being forwarded from wireless clients to the UAP’s LAN side.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version
UniFi Console Support File (as private attachment)

Download links

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-0-33/90751d74-231e-4263-993d-e181ae04860f

DarkVolli · April 18, 2025 at 10:33 AM

Quote from BlackSpy

Improved WiFi Throughput.

Habe gerade testweise einen meiner U7 Pro auf 8.0.31 geupdatet...

...bringt tatsächlich eine signifikante Verbesserung. (IPhone 16 Pro, reines 6 GHz WLAN, DL 809 -> 946 Mbit, UL 1320 -> 1684 Mbit)

MPN · April 22, 2025 at 5:00 PM

Habe leider ständig reboots ich verstehe es nicht…….

somm · April 22, 2025 at 5:25 PM

Mein iPad verliert auch dauernd die Verbindung.

Marci · April 23, 2025 at 8:09 AM

Ich bin zurück auf die 8.0.19 aufgrund der Abbrüche von iPhones

DarkVolli · April 23, 2025 at 8:20 AM

Quote from Marci

Ich bin zurück auf die 8.0.19 aufgrund der Abbrüche von iPhones

Hmm, verstehe ich nicht...

...habe mit keinem Apple Device 6GHz@160MHz Probleme: Iphone 16 Pro, Macbook M3 Pro, M4 Mini.

Allerdings reines 6GHz WLAN@160MHz. Ich habe mit meinem 16Pro MLO über alle drei Frequenzen getestet -> ca. 30% der Übertragungsrate 6GHz...

MPN · April 23, 2025 at 8:31 AM

Der u7 ist finster weißer Ring und dann wird er wird blau dann geht es ein paar Stunden und dann fängt der Spaß wieder an…. Oder ist ist im 10 min Rhythmus….. echt nervig.spannungs Bergung kann es nicht sein dann braucht er jetzt 80 Watt hab jetzt schon getuscht auch weiterhin das Thema,,,,, und vorher nicht……

Marci · April 23, 2025 at 10:22 AM

Quote from DarkVolli

Hmm, verstehe ich nicht...
...habe mit keinem Apple Device 6GHz@160MHz Probleme: Iphone 16 Pro, Macbook M3 Pro, M4 Mini.

Allerdings reines 6GHz WLAN@160MHz. Ich habe mit meinem 16Pro MLO über alle drei Frequenzen getestet -> ca. 30% der Übertragungsrate 6GHz...

mein Problem ist nur in einem Raum, wo der Empfang von 2 iPhones 16 im 6GHZ bei -75db liegt und die beiden Clients sind minütlich am hinundher switchen und roamen zwischen meinem U7PW und U7PM. Schlechter Empfang im 6GHZ und Apple ist nachwie vor mit Unify schwierig. Vorher mit einem Galaxy S24 im 6GHZ an der gleichen Position überhaupt kein Roaming oder Bandswitching

Marci · April 23, 2025 at 10:27 AM

Quote from Marci

mein Problem ist nur in einem Raum, wo der Empfang von 2 iPhones 16 im 6GHZ bei -75db liegt und die beiden Clients sind minütlich am hinundher switchen und roamen zwischen meinem U7PW und U7PM. Schlechter Empfang im 6GHZ und Apple ist nachwie vor mit Unify schwierig. Vorher mit einem Galaxy S24 im 6GHZ an der gleichen Position überhaupt kein Roaming oder Bandswitching

Ein Beispiel: Das Handy liegt auf dem Tisch in der Nacht und wird nicht bewegt

**BlackSpy** · April 28, 2025 at 9:24 AM Official Post

UniFi Access Point (all U7 and E7 models) 8.0.33

Improvements

Improved MLO throughput in specific scenarios.
Improved auto-recovery when access point freezes.
Improved AFC position acquisition stability and prevented intermittent failures.

Bugfixes

Fixed communication between non-MLO devices on MLO wireless networks.
Fixed incorrect Ethernet statistics reporting on dual-port devices.
Fixed RADIUS authentication issues when multiple servers are configured.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

AP model(s)
Previous AP release version
UniFi Network application version
UniFi Console Support File (as private attachment)

Download links