UniFi Access Point (all U7 models) 8.0.19

https://community.ui.com/releases/UniFi…40-6a92126e9704

Overview

UniFi Access Point 8.0.19 introduces the Multi-Link Operation (MLO) feature and includes further improvements for 2.4 GHz IoT connectivity.

This is the initial release for the U7-Lite and U7-In-Wall products. Firmware updates will be rolled out gradually for individual models.

Improvements

• Improved client connectivity.
• Improved AP stability.

Bugfixes

• Fixed an issue causing inter-client communication to drop.
• Fixed cloud connectivity for some IoT devices.

Additional information

NOTE: For the best connectivity and roaming experience when using MLO (Multi-Link Operation) mode, it is required to enable WPA3 or WPA3 Enterprise security mode. When MLO is selected, the UniFi Network application will automatically enforce this security mode.

———

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version
• UniFi Console Support File (as private attachment)

Download links

U7-Pro | U7-Pro-Wall | U7-Pro-Max | md5sum | sha256sum

U7-Outdoor | md5sum | sha256sum

U7-Lite | U7-In-Wall | md5sum | sha256sum

UniFi Access Point (all U7 and E7 models) 8.0.49

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-0-49/d560c28b-8625-4535-938f-a50867597f3b

Overview

This release is promoted to Official/Stable release channel for these models:

• E7, E7 Campus, E7 Audience - June 26, 2025
• U7 Outdoor, U7 Lite, U7 In-Wall - June 30, 2025
• U7 Pro Max, U7 Pro XG, U7 Pro XGS - July 1, 2025

Firmware updates for other models will be rolled out gradually.

Improvements

• Added Roaming Assistant support
• Enabled wireless meshing for U7/E7 (with MLO enabled) to Wi-Fi 6/5 APs.
• Improved AP stability.
• Improved client connectivity.
• Improved wireless client roaming.
• Improved meshing performance in dense environments.
• Improved airtime utilization on the 5 GHz band.
• Improved MLO throughput in specific scenarios.
• Improved 6GHz auto-channel selection algorithm.
• Improved AFC position acquisition stability and prevented intermittent failures.
• Improved Ethernet stability on E7/U7 10GbE devices.
• Updated regulatory information for Brazil.
• Updated regulatory for Indonesia.

Bugfixes

• Fixed empty airtime scan results for the 6 GHz band when operating in 320 MHz bandwidth.
• Fixed corrupted packet capture data.
• Fixed increased CPU usage when SNMP monitoring is enabled.
• Fixed RADIUS authentication issues when multiple servers are configured.
• Fixed RADIUS CoA not working in some environments.
• Fixed Intel AX210 wireless authentication failures over 6GHz (WPA3) on Linux.
• Fixed an issue where the AP stopped broadcasting when channels 12–13 were set for the 2.4GHz band in the United Kingdom.
• Fixed an issue where Multicast and Broadcast Control did not properly block traffic between clients connected to the same AP and on the same band.
• Fixed IPv6 RA VLAN leak between clients on the same AP.
• Fixed IPv6 leakage between SSIDs in certain scenarios.
• Fixed regression in IPv6 address assignment via SLAAC.
• Fixed communication between non-MLO devices on MLO wireless networks.
• Fixed incorrect Ethernet statistics reporting on dual-port devices.
• Fixed various reporting issues.

Additional information

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version
• UniFi Console Support File (as private attachment)

Download links

U7-Pro | U7-Pro-Wall | U7-Pro-Max | U7-Pro-Outdoor | U7-Pro-XG | U7-Pro-XGS | E7 | E7-Campus | md5sum | sha256sum

U7-Outdoor | U7-Lite | U7-In-Wall | md5sum | sha256sum

E7-Audience | md5sum | sha256sum

Nun der Rest

UniFi Access Point (all U7 and E7 models) 8.0.49

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-0-49/d560c28b-8625-4535-938f-a50867597f3b?page=4

Overview

This release is promoted to Official/Stable release channel for these models:

• E7, E7 Campus, E7 Audience - June 26, 2025
• U7 Outdoor, U7 Lite, U7 In-Wall - June 30, 2025
• U7 Pro Max, U7 Pro XG, U7 Pro XGS - July 1, 2025
• U7 Pro, U7 Pro Wall, U7 Pro Outdoor - July 3, 2025

Improvements

• Added Roaming Assistant support
• Enabled wireless meshing for U7/E7 (with MLO enabled) to Wi-Fi 6/5 APs.
• Improved AP stability.
• Improved client connectivity.
• Improved wireless client roaming.
• Improved meshing performance in dense environments.
• Improved airtime utilization on the 5 GHz band.
• Improved MLO throughput in specific scenarios.
• Improved 6GHz auto-channel selection algorithm.
• Improved AFC position acquisition stability and prevented intermittent failures.
• Improved Ethernet stability on E7/U7 10GbE devices.
• Updated regulatory information for Brazil.
• Updated regulatory for Indonesia.

Bugfixes

• Fixed empty airtime scan results for the 6 GHz band when operating in 320 MHz bandwidth.
• Fixed corrupted packet capture data.
• Fixed increased CPU usage when SNMP monitoring is enabled.
• Fixed RADIUS authentication issues when multiple servers are configured.
• Fixed RADIUS CoA not working in some environments.
• Fixed Intel AX210 wireless authentication failures over 6GHz (WPA3) on Linux.
• Fixed an issue where the AP stopped broadcasting when channels 12–13 were set for the 2.4GHz band in the United Kingdom.
• Fixed an issue where Multicast and Broadcast Control did not properly block traffic between clients connected to the same AP and on the same band.
• Fixed IPv6 RA VLAN leak between clients on the same AP.
• Fixed IPv6 leakage between SSIDs in certain scenarios.
• Fixed regression in IPv6 address assignment via SLAAC.
• Fixed communication between non-MLO devices on MLO wireless networks.
• Fixed incorrect Ethernet statistics reporting on dual-port devices.
• Fixed various reporting issues.

Additional information

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version
• UniFi Console Support File (as private attachment)

Download links

U7-Pro | U7-Pro-Wall | U7-Pro-Max | U7-Pro-Outdoor | U7-Pro-XG | U7-Pro-XGS | E7 | E7-Campus | md5sum | sha256sum

U7-Outdoor | U7-Lite | U7-In-Wall | md5sum | sha256sum

E7-Audience | md5sum | sha256sum

UniFi Access Point (U7 and E7 models) 8.2.17

https://community.ui.com/releases/UniFi-Access-Point-U7-and-E7-models-8-2-17/9186227d-14c5-4935-a764-7faa17400bd3

Overview

This release is promoted to Official/Stable release channel for these models:

• U7-Pro-Max, U7-Lite, U7-Outdoor, U7-Pro-Wall, U7-Pro-XG, U7-Pro-XGS - October 13, 2025
• U7-Pro, U7-Pro-Outdoor, U7-In-Wall, E7, E7-Campus, E7-Audience - October 15, 2025

---

This release introduces several important improvements focused on real-world Wi-Fi reliability, seamless mobility, and smarter network management. It brings meaningful refinements that enhance roaming consistency, reduce network congestion, and streamline configuration workflows for UniFi deployments.

Improved Client Roaming Experience

Optimizes client handoff behavior on non-MLO (single-link) Wi-Fi networks to provide smoother transitions between access points. These improvements reduce latency and interruptions during roaming, especially for mobile, VoIP, and streaming devices that move frequently across coverage zones.

This enhancement ensures more stable connections and minimizes the temporary stalls or re-authentications that could previously occur during AP transitions.

Multicast Filtering and VLAN Bridging

Enhances WiFi performance by allowing selective filtering of multicast services to reduce unnecessary airtime usage. Also introduces VLAN Bridging, enabling multicast proxying between VLANs for WiFi clients. VLAN Bridging is available only when the Gateway mDNS Proxy is disabled.

Channel AI Optimization

Uses neighboring AP signals to optimize channel distribution. Designed for controlled, very high-density deployments where external interference is limited.

Provides a visual channel map for quick insights.

Automated optimization ensures balanced channel usage.

Quick-Scan Environment Analyzer

Adds an instant RF scan feature that identifies nearby networks, interference sources, and active channels in seconds.

Quick-Scan enables faster site evaluation, easier troubleshooting, and more informed deployment decisions — without taking radios offline or interrupting client traffic.

Instant Changes - Configuration Engine

Implements a high-speed configuration pipeline that applies changes directly to active subsystems without rebooting the entire device.

This greatly reduces downtime when adjusting SSIDs, VLANs, or radio settings, allowing administrators to make frequent updates in live networks without disrupting connected clients.

In larger installations, Instant-Changes can shorten network-wide updates from minutes to seconds.

Improvements

• Improved TX power handling for 6 GHz Extended Range mode.
• Optimized handling of heavy broadcast/multicast traffic to prevent Access Points from appearing offline in the Network application.
• Enhanced 2.4 GHz performance in high-interference environments for U7-Pro-Max and U7-Pro-XGS models.
• Adds full IPv6 compatibility for Dynamic Authorization (DAS) and Change of Authorization (CoA) operations

Bugfixes

• Fixed Multicast Enhancement (IGMP Snooping) for networks with static VLAN assignment.
• Fixed client connection failures after Wi-Fi schedules end when WPA group rekeying is enabled.
• Fixed client authentication timeout issues when multiple RADIUS servers are configured.
• Fixed missing RADIUS accounting statistics.
• Fixed MLO client disconnects caused by the Minimum RSSI setting.
• Fixed Wi-Fi Speed Limits not applying to MLO clients.
• Fixed mesh uplink priority selection.
• Fixed rare cases where Band Steering functionality did not operate correctly
• Fixed uplink speed reporting issues in LCM for E7 Audience.
• Fixed rare 2.4 GHz connectivity issues.

Additional information

INFO: U7-LR model support will be added in upcoming releases.

----

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Release Candidate.

• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version
• UniFi Console Support File (as private attachment)

Download links

U7-Pro | U7-Pro-Wall | U7-Pro-Max | U7-Pro-Outdoor | U7-Pro-XG | U7-Pro-XGS | E7 | E7-Campus | md5sum | sha256sum

U7-Outdoor | U7-Lite | U7-In-Wall | md5sum | sha256sum

E7-Audience | md5sum | sha256sum

Jetzt für alle U7 bis auf LR

UniFi Access Point (all U7 and E7 models) 8.3.2

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-3-2/16511e59-e4ef-4b3a-98bf-426f174733e7

Overview

This release is promoted to Official/Stable release channel for these models:

• U7-Pro-Max, U7-Lite, U7-Outdoor, U7-Pro-Wall, U7-Pro-XG, U7-Pro-XGS - December 17, 2025

Improvements

• Improved client connectivity in MLO mode.
• Improved RADIUS failover mechanism for enhanced reliability.
• Improved AP stability.
• Added 6 GHz regulatory support for Ukraine.
• Added 6 GHz regulatory support for Pakistan.
• Updated 6 GHz regulatory compliance for South Korea.

Bugfixes

• Fixed an issue where IPTV services did not function correctly when connected through U7-IW switch ports.
• Fixed an Ethernet link negotiation issue occurring after device reboot or firmware upgrade on models with 10G ports.
• Fixed an issue where Guest Portal clients were unable to obtain a DHCP IP address.
• Fixed an issue where devices appears as offline when a large number of blocked clients were configured.
• Fixed an issue where connectivity would fail on E7-Audience when MLO was used.
• Fixed an issue where E7-Audience would stop broadcasting 6 GHz after configuration changes.

Additional information

INFO: U7-LR model support will be added in upcoming releases.

----

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.

• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version
• UniFi Console Support File (as private attachment)

Download links

U7-Pro | U7-Pro-Wall | U7-Pro-Max | U7-Pro-Outdoor | U7-Pro-XG | U7-Pro-XGS | E7 | E7-Campus | md5sum | sha256sum

U7-Outdoor | U7-Lite | U7-In-Wall | md5sum | sha256sum

E7-Audience | md5sum | sha256sum

Da https://www.ui.com/download steht er auf Final, manchmal sind die ein wenig lahm in der Anpassung.
Final gilt auch nur für die oben genannten.

• U7-Pro, U7-Pro-Outdoor, U7-In-Wall, E7, E7-Campus, E7-Audience - December 19, 2025

Jetzt auch Final

UniFi Access Point (all U7 and E7 models) 8.4.6

https://community.ui.com/releases/UniFi-Access-Point-all-U7-and-E7-models-8-4-6/a2e0cac9-f769-48ff-828b-7a6f76c13c53

Overview

This release is promoted to Official/Stable release channel for these models:

• U7-Pro - January 22, 2026
• U7-Pro-Max, U7-Pro-Wall, U7-Pro-XG, U7-Pro-XGS, U7-Pro-XG-Wall, U7-Pro-Outdoor - January 26, 2026
• U7-Lite, U7-Outdoor, U7-In-Wall, E7, E7-Campus, E7-Audience - January 26, 2026

Improvements

• Improved network self-healing: APs now consistently revert to stable wired connections, automatically clearing unintended wireless paths after topology changes.

Additional information

INFO: U7-LR model support will be added in upcoming releases.

----

Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Release Candidate.

• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version
• UniFi Console Support File (as private attachment)

Download links

U7-Pro | U7-Pro-Wall | U7-Pro-Max | U7-Pro-Outdoor | U7-Pro-XG | U7-Pro-XG-Wall | U7-Pro-XGS | E7 | E7-Campus | md5sum | sha256sum

U7-Outdoor | U7-Lite | U7-In-Wall | md5sum | sha256sum

E7-Audience | md5sum | sha256sum