Beta Unifi Next-Gen Gateway FW 1.9.x

https://community.ui.com/relea…10-4773-b6ea-bb599af1de25

Improvements

• Minor LCM improvements and bug fixes.

Bugfixes

• Fix issue that UXG-Pro shows disconnected in device page when there're 30+ networks created.
• Fix an issue that remote user VPN disconnects occasionally.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

UniFi NeXt-Gen Gateway Firmware 1.9.0-4

https://community.ui.com/relea…0c-4456-b629-6f59399b8b17

Bugfixes

Fix an issue that honeypot service doesn't work properly.

Fix an issue that some log entries may not follow the correct timezone setting.

Fix an issue that Chromebooks cannot connect VPN to UXG-Pro.

UniFi NeXt-Gen Gateway Firmware 1.11.0-15

https://community.ui.com/relea…53-4933-9831-84819afff67d

Improvements

• Minor LCM fixes and improvements.
• Align timezone for all system log entries.
• Improve WAN fail-over stability.
• Improve the accuracy of SFP link status detection.
• Upgrade Linux kernel to 4.19.
• Upgrade OPENVPN to 2.5.2.
• Enable SSH key-based authentication.

Bugfixes

• Fix an issue that device reboots when the system is under extremely heavy load.
• Fix an issue that configured SSH username doesn't take effect on UXG-Pro.
• Fix an issue that gateway services may be accidentally disabled.
• Fix an issue that IPSEC site-to-site VPN statistics may be nulled periodically.
• Fix an issue that DDNS may not work as expected when WAN1 and WAN2 have their own DDNS settings.
• Fix an issue that could cause mDNS to no work.
• Fix an issue that one DHCP option (BR option 28) is wrong when the honeypot service is enabled.
• Fix an issue that WAN2 SFP port doesn't pass traffic after reboot under certain circumstances.
• Fix bug when U-LTE sometimes was not selected as active WAN interface.
• Fix an issue that WAN info in UI is not consistent after remapping WAN ports.
• Fix an issue that enabling DPI blocks access to some sites without restrictions.
• Fix an issue that IPS/IDS repeatedly crash when there're several networks created.
• Disable unused BLE on UXG-Pro

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UXG-Pro and execute the following in it's shell:

ubnt-upgrade https://fw-download.ubnt.com/data/unifi-firmware/7970-UXGPRO-1.11.0-15-8ddbe941a4e44ee1b5ad68a6b4eacca4.bin

UniFi NeXt-Gen Gateway Firmware 1.11.0-16

https://community.ui.com/relea…09-4abe-a5f5-cef28fe0eadd

Improvements:

Improve PPPoE throughput.

Bugfixes:

Fix a potential memory leak issue when "Threat Scanner" is enabled.

Fix an occasional issue that random network services could become malfunctional.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

UniFi NeXt-Gen Gateway Firmware 1.11.0-20

https://community.ui.com/relea…bd-4010-baa4-ecb21956b1fd

Improvements

• LCM minor fix and improvements.

Bugfixes

• Fix issue where DHCP/DNS could stop working when DDNS was in use.
• Fix an issue that LCM shows no WAN IP in some cases.
• Fix an issue that firewall configuration randomly fails when changing content filtering policy.
• Fix a GeoIP issue that traffic is still hitting internal servers while source country is blocked.
• Fix an issue that DPI & FP reconfiguration is accidentally ignored.
• Fix an issue that IPsec doesn't automatically reconnect.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

UniFi NeXt-Gen Gateway Firmware 1.11.0-21

https://community.ui.com/relea…54-41ea-a092-cd1d40c9ece4

Bugfixes

• Fix a memory leak issue in Threat Management services.
• Fix issue where the SFP+ port may not link up.
• Fix issue where DNS servers originated by inactive WANs were used for DNS resolving.
• Fix a memory leak issue in Threat Management services.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

UniFi NeXt-Gen Gateway Firmware 1.11.0-23

https://community.ui.com/relea…ce-4f65-b311-6e9a3a5e2b10

Bugfixes:

Fix validation issues in the setup wizard.

Fix L3 adoption via the setup wizard.

Fix issue where the LCM background color does not change after adoption.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

UniFi NeXt-Gen Gateway Firmware 1.12.15

https://community.ui.com/releases/UniFi-NeXt-Gen-Gateway-Firmware-1-12-15/7cd96e45-7b2a-4f82-a9b7-841f9080db33

Improvements

• Add support for disabling weak ciphers for L2TP VPN.
• Add firewall rule match to firewall log prefix.
• Improve the accuracy of SFP link status detection.
• Improve compatibility to PPPoE ISP provider that provides IPv6.
• Update SSH login message to make it compliant with ToS and EULA.
• Update timezone data.
• Update OpenSSL to 1.1.1l.
• Update ROOT CA.
• Update Suricata to 6.0.4
• Update busybox from 1.31.1 to 1.34.1
• Update DPI database (Requires UniFi Network 7.1.59 or newer).
• Save firewall log in "/var/log/iptables".
• Remove TLS1.0 and TLS1.1 support for guest portals.
• Exclude weak TLS ciphers for the built-in WiFiman server.
• Minor LCM fixes and improvements.

Bugfixes

• Fix issue where configuration may fail to apply in edge cases.
• Fix bug that caused backup restore to fail if ipset with the same name but different type already exists.
• Fix log flood from "arping" process when LAN client has multiple IPs on the same physical interface.
• Fix bug when "pppd" client keeps running after switching WAN from PPPoE to DHCP.
• Fix bug when Chromecast Android app would fail to arrange multiple speakers into groups.
• Fix gray background on LCM display that might confuse users into thinking that UXG has not been adopted.
• Fix issue where arping message was spamming log files.
• Fix a corner issue where the default routing table may become incorrect when both WANs are used.
• Fix an issue where the UXG-Pro can't link with 1G peer device using UF-RJ45-10G on SFP+ ports.
• Fix an issue where the advertised MTU in IPv6 RA packet is not used.
• Fix issue that Content Filtering does not work for wired client with guest portal enabled.
• Fix issue that excessive incorrect failovers are reported.
• Fix config errors when renaming radius profile.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UXG-Pro and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-upgrade <firmware_url>

Checksum

md5: a4019baf3dee5b298ae399eb4d33ebe4
sha256: 352ab1ade21b7edd698f6dcd5ecc22fabf8faf1063b21a54d8e088fb68eb30e3

Download links

UXG-Pro

UniFi NeXt-Gen Gateway Firmware 1.12.16

https://community.ui.com/releases/UniFi-NeXt-Gen-Gateway-Firmware-1-12-16/6bd5d5fb-76d3-497b-9e46-d388bbf0e52e

Improvements

• Save firewall log in /var/log/messages with informational prefix.
• Reduce the delay in DHCP server responses.
• Minor LCM fixes and improvements.
• Upgrade OpenSSL to 1.1.1n.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UXG-Pro and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-upgrade <firmware_url>

Checksum

md5: 3ccbfcf15cd77e1cf8636c3ca19c621e
sha256: 06a5021a5e8a3a281ca74ff63d07e969c34c86c8f990dacf9e1e0225bd822798

Download links

UXG-Pro

UniFi NeXt-Gen Gateway Firmware 1.12.17

https://community.ui.com/releases/UniFi-NeXt-Gen-Gateway-Firmware-1-12-17/e408e3ab-2d48-446a-ac99-ae5ce3f84f3b

Improvements

• Improve device stability.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UXG-Pro and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-upgrade <firmware_url>

Checksum

md5: 0266555a8bf7c748a148522c142f57ae
sha256: 9f0a22d35d078ddf96a0c01d9a87ba3f2f386c47debe19daa7e2c54682a5a7ba

Download links

UXG-Pro

UniFi NeXt-Gen Gateway Firmware 1.12.19

https://community.ui.com/releases/UniFi-NeXt-Gen-Gateway-Firmware-1-12-19/01c42ce4-52fb-4e24-8814-4a5de0cd650f

Improvements

• Improve device stability.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UXG-Pro and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-upgrade <firmware_url>

Checksum

md5: 0fe1359b63a6a98267928118aa66f041
sha256: 517a9c4e1d96bc322df1c7eb1f5420880bb264f5073aae8c924bba1823e8aba9

Download links

UXG-Pro

UniFi NeXt-Gen Gateway Firmware 1.13.2

https://community.ui.com/releases/UniFi-NeXt-Gen-Gateway-Firmware-1-13-2/822fc119-ebbe-4008-aa94-674798e24134

Improvements

• Add per WAN latency reporting and WAN packet loss detection (Requires Network application version 7.2 or newer).
• Add OpenVPN client support (Requires Network application version 7.2 or newer).
• Add bandwidth limiting in Traffic Rules and Routes. (Requires Network application version 7.2 or newer).
• Add load balancing support (Requires Network application version 7.2 or newer).
• Add support for Teleport VPN (Requires Network application version 7.3 or newer).
• Upgrade Suricata to 6.0.5.
• Improve SFP link with 1G peer device when using 10G SFP modules.
• Improve underestimated speedtest results.
• Improve WiFiman interoperability.
• Report AC outlet status to the Network application (requires version 7.2 or newer to correctly display the outlet status).

Bugfixes

• Fix issue that DHCP IP doesn't renew right after performing MAC cloning.
• Fix issue that IPsec S2S VPN drops when Teleport client connects.
• Fix issue that L2TP VPN may fail to configure when there is no IPv4 WAN address.
• Fix issue that firewall rule on bridge interface could fail to apply.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UXG-Pro and execute the following in it's shell (replace <em><firmware_url></em> with one of the download links found below):

ubnt-upgrade <firmware_url>

Checksum

md5: babd3dcc60a87415ef2c13e239f12fd8
sha256: 9e7107ff1f6f18d60f638a96354fa1de13170b75bb78c3bc04dc571334175935

Download links

UXG-Pro

UniFi NeXt-Gen Gateway Firmware 1.13.4

https://community.ui.com/releases/UniFi-NeXt-Gen-Gateway-Firmware-1-13-4/a45e1bd0-c48c-4af2-ad9b-8864a8513363

Improvements

• Improve compatibility with the UACC-CM-RJ45-MG module.
• Improve load-balancing UX.

Bugfixes

• Fix inaccurate timezone converting causing schedule issues for Scheduled Traffic Rules.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UXG-Pro and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-upgrade <firmware_url>

Checksum

md5: a14c5daf7c8f11c931b86d047b9251f5
sha256: 044bc924679a2a599c31f81ddd6df8038281a710e2d8e4e01a2dc759cafd349c

Download links

UXG-Pro

UniFi NeXt-Gen Gateway 1.13.6

https://community.ui.com/releases/UniFi-NeXt-Gen-Gateway-1-13-6/f9eb5a08-7b86-4eba-93d5-83a775fbb6db

Improvements

• Enable Jumbo Frame support on the UXG-PRO.
• Add MFA support and SFP speed setting in UXG-Pro WEB setup.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Manual upgrade instructions

SSH into your UXG-Pro and execute the following in it's shell (replace <firmware_url> with one of the download links found below):

ubnt-upgrade <firmware_url>

Checksum

md5: 212fdf94c95999e288c99611694f234b
sha256: 57e4aeebf2354d6328da76f4bc0b428e531d1bd10fc168798cb6f7b1ff8a60e7

Download links

UXG-Pro