UAP Firmware 6.0.1

https://community.ui.com/relea…48-4114-a20c-7b8af00b0892

Improvements

[UAP-Gen2/Gen3] Improve stability.

[UAP-Gen4/Gen5] Improve WiFi connectivity with power-saving clients.

[UAP-Gen4/Gen5] Improve 160MHz RSSI reporting for wireless downlinks.

[UAP-Gen2/Gen3/Gen6] Improve wireless uplink reliability with more than 3 SSIDs per band.

[UAP] Improve IPv6 reliability.

[UAP] Improve memory usage.

[ULTE] Improve custom LTE profile activation.

Bugfixes:

[U6-Pro] Fix intermittent issue with 5GHz WiFi breaking after DFS pulse is detected.

[UAP-Gen4/Gen5] Fix 5GHz bandwidth potentially changing erroneously.

[UAP] Use correct NAS IP address for RADIUS auth when using static IP.

[UAP] Avoid intermittent failed readoption loops.

[UAP] Fix intermittent issue of incorrect GTK being used after an interface restart.

[UAP] Fix intermittent firmware update failure on wirelessly connected APs adopted to a UDM.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Please refer to this article to find more details on how to identify your Access Point generation.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

Application version.

Firmware version (previous and current).

Device model(s).

Download links

Ich würde warten und auf der UI Seite lesen ob es zu Problem kommt, danach ggf per Hand

UAP Firmware 6.0.2

https://community.ui.com/relea…13-40f0-b72b-0eba9479dd28

Overview

* This release is only for the following models:

• U6-Pro/Mesh

Bugfixes

• [UAP-Gen6] Fix wireless adoption of APs, USP-Plug/Strip, and UniFi Protect cameras.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

• U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
• Please refer to this article to find more details on how to identify your Access Point generation.
• Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
• All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 6.0.4

https://community.ui.com/relea…c3-489d-82ce-5aee3301ede1

Overview

* This release is only for the following models:

U6-Pro/Mesh/IW

Bugfixes:

[UAP] Fix reliability of IPv6 RA and other multicast packets.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Please refer to this article to find more details on how to identify your Access Point generation.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server)

UAP Firmware 6.0.6

https://community.ui.com/relea…42-44cb-be83-da7c42adb8de

Improvements

[UAP-Gen4/Gen5] Improve WiFi connectivity.

Bugfixes:

[UAP-Gen4/Gen5] Fix intermittent missing wireless downlink priority selection candidates.

[UAP-Gen4/Gen5] Fix phantom clients in Application client list.

[UAP-Gen2/Gen3] Fix intermittent disconnection of wireless downlinks.

[UAP-Gen2/Gen3] Fix intra-VLAN routing of packets on wireless uplinks.

[UAP-Gen5] Fix intermittent BLE adoption failure.

[UAP-Gen5] Fix WiFi connectivity issues.

[UAP-Gen2] Fix DHCP issues after GTK rekey on 2.4 GHz.

[UAP] Fix reliability of IPv6 RA and other multicast packets.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Please refer to this article to find more details on how to identify your Access Point generation.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 6.0.7

https://community.ui.com/relea…23-4dbf-a34d-4a2e974c7a40

Improvements:

[UAP-Gen4/Gen5] Improve IOT WiFi device compatibility.

[UAP-BeaconHD] Improve initial adoption reliability.

Bugfixes:

[UAP-Gen4/Gen5] Fix incorrect reporting of bandwidth in RF Scan.

[UAP-Gen2/Gen3] Fix intermittent instability with proxy ARP enabled.

[UAP] Fix memory leak in WiFi authenticator.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Please refer to this article to find more details on how to identify your Access Point generation.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 6.0.8

https://community.ui.com/releases/UAP-Firmware-6-0-8/e6306c72-7e9a-4b7a-935d-7c9508d4f3f8

Improvements

• [U6-Mesh/U6-IW] Add support for adopting UP-Sense to the Protect Application.
• [UAP-Gen6] Add SNMP support.
• [UAP-Gen4/Gen5] Enable 80MHz in Australia on U-NII 3 channels.
• [UAP-Gen4/Gen5] Improve DFS radar detection.
• [UAP-Gen4] Improve overall stability.
• [UAP] Improve Wireless Experience Score (WES) calculation.

Bugfixes

• [UAP-Gen6] Fix unexpected reboot during RF Scan.
• [U6-IW] Fix Port VLANs not working.
• [UAP-Gen5] Fix band steering log spam.
• [U-LTE-Pro-EU] Fix SIM card data reading for some SIM cards.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

• U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
• Please refer to this article to find more details on how to identify your Access Point generation.
• Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
• All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).