UniFi Protect Application 2.x.x

Es gibt 12 Antworten in diesem Thema, welches 2.259 mal aufgerufen wurde. Der letzte Beitrag () ist von BlackSpy.

  • UniFi Protect Application 2.0.0

    https://community.ui.com/releases/UniFi-Protect-Application-2-0-0/d125d769-a514-4f02-b073-c4a2c2e72d23


    Overview

    To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

    • UDM-Pro 1.10.4
    • UDM-Pro-SE 2.2.4
    • UNVR / UNVR PRO 1.4.9
    • UCK-G2-PLUS 2.1.11
    • UDR 2.2.12

    To use this version, we recommend using following mobile app versions (or newer):

    Improvements

    • Web UI: Add PTZ presets.
    • Web UI: Add low latency video streaming.
    • Web UI: Add links to dashboard graph cameras.
    • Web UI: Add Recording Mode & Total storage columns.
    • Web UI: Add camera picture settings accessible from Playback.
    • Web UI: Add animated event thumbnails on hover.
    • Web UI: Add Device grouping.
    • Web UI: Update messages in timelapse and add a clickable link to timeline reasons for better error handling when there are application issues.
    • Web UI: Update the design of the unsaved changes popup.
    • Web UI: Update doorbell screen design.
    • Web UI: Improve PTZ zooming.
    • Web UI: Improve video player UX.
    • Web UI: Improve device property panel.
    • Web UI: Allow assigning live views to multiple viewports.
    • Web UI: Allow multiple downloads and deletion on detection page.
    • Web UI: Show events for unadopted (historic) cameras.
    • Web UI: Show notification with actionable feedback if the database is corrupted.
    • Web UI: Show Playback page when HDD is not inserted.
    • Web UI: Hide title when there is not enough space in the timeline.
    • Web UI: Improve settings UX.
    • Web UI: Start PTZ keyboard mode by default.
    • Send animated thumbnails in email notifications.
    • Improve performance for analytics heatmap and detections.
    • Improve image quality on slow networks by supporting dynamic fps.
    • G4 Doorbell Pro: Add package detection. *
    • G3-Instant / G4-Instant: Improve audio quality.
    • G4 Bullet / G4 Pro / G4 PTZ / G4 Dome / G4 Doorbell / G4 Doorbell Pro: Improve image quality at night under HDR mode.

    Bugfixes

    • Web UI: Fix analytics page date selection when switching between cameras.
    • Web UI: Fix the issue where online cameras are shown as disconnected in the dashboard graph.
    • Web UI: Fix partially covered tooltips in playback.
    • Web UI: Fix page crash when WebGL fails.
    • Web UI: Fix bugs when no HDD is inserted.
    • Web UI: Fix the blank screen after exiting dewarp mode on Safari.
    • Web UI: Fix resetting status selection in the device page.
    • Web UI: Fix device property panel scrollbar jitter.
    • Web UI: Fix the wrong playback with no video event text.
    • Web UI: Fix MPs shown for AI360.
    • Web UI: Fix issue where live streaming sometimes does not start in Firefox.
    • Web UI: Fix console errors in the device page.
    • Web UI: Fix issue where bridge device could not be removed.
    • Web UI: Fix page crash when unmanaging Smart Sensor or ViewPort.
    • Web UI: Prevent the "prev" & "next" buttons from disappearing when on the last event page.
    • Web UI: Allow to edit zones while the video is buffering.
    • Web UI: Disable digital zoom when in dewarp mode.
    • Web UI: Disable unavailable dates in the event list date picker.
    • Web UI: Disable the button while no password is entered.
    • Web UI: Hide the "View it now" button if it's before the camera recording starts.
    • Web UI: Hide the “adopt” button after adopting via password.
    • Fix issue where newly created users do not have default notifications configuration.
    • Fix issue where videos cannot be exported due to HTTP request timeout.
    • G4-PTZ: Zoom speed is sometimes slow when repeatedly doing zoom.
    • G4-PTZ: Can't tilt between 0 ~ -20 after high FPS mode toggle.
    • AI-Bullet / AI-360: Image turned to color mode accidentally from gray when adjusting image settings.
    • AI-Bullet / AI-360: Fix overexposure image.
    • G4-Instant: Image quality goes wrong after Day/Night switch.
    • Cameras: Fix time zone issues for some specific ones, like "Asia/Jerusalem", "America/Argentina/Cordoba", "Japan".
    • Smart Flood Light: Fix the issue where the light is randomly turned on.
    • Smart Flood Light: Prevent enabling the LED when the floodlight is in the daytime scene and the camera in the nighttime scene.

    Additional information

    If you experience any issues with this release, please reach out to our support team at help.ui.com

  • Man, die BUG Fix Liste ist ja mal wieder lang :grinning_squinting_face:


    Dann wollen wir mal updaten :cold_face:


  • Ich habe mich mal ein wenig mit den neuen Improvements auseinandergesetzt:


    Werde ich einmal die Tage näher mit der Protect App testen.


    Funktioniert, jedoch nicht bei aktiven Aufnahmen z:b. bei Detection!


    Funktioniert, habe mal zu Test eine Kamera aus dem System entfernt.

  • hab gerade ein Update auf 2.0.1 bekommen....


    Bugfixes

    • Fix issue where Protect is constantly restarting when using RTSP streams
    • Web UI: Keep the selected video quality over sessions.
    • Web UI: Disable ongoing event download.

  • Habe ich vergessen :thinking_face:


    UniFi Protect Application 2.0.1

    https://community.ui.com/releases/UniFi-Protect-Application-2-0-1/62522de5-3010-4e4c-8cf1-b832418107f2


    Overview

    To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

    • UDM-Pro 1.10.4
    • UDM-Pro-SE 2.2.4
    • UNVR / UNVR PRO 1.4.9
    • UCK-G2-PLUS 2.1.11
    • UDR 2.2.12

    To use this version, we recommend using following mobile app versions (or newer):

    Bugfixes

    • Fix issue where Protect is constantly restarting when using RTSP streams
    • Web UI: Keep the selected video quality over sessions.
    • Web UI: Disable ongoing event download.

    Additional information

    If you experience any issues with this release, please reach out to our support team at help.ui.com.

  • UniFi Protect Application 2.1.1

    https://community.ui.com/releases/UniFi-Protect-Application-2-1-1/f77cb3ff-7834-47e8-ba98-93d0d86d459d


    Overview

    To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

    • UDM-Pro 1.10.4
    • UDM-Pro-SE 2.2.4
    • UNVR / UNVR PRO 1.4.9
    • UCK-G2-PLUS 2.1.11
    • UDR 2.2.12

    To use this version, we recommend using following mobile app versions (or newer):

    Improvements

    • Web UI: Add line crossing.
    • Web UI: Add mac address to the sensor side panel.
    • Web UI: Improve search in device list.
    • Web UI: Improve the scrolling experience when using timelapse with detection only recording mode.
    • Web UI: Zoom in timeline when in selection mode.
    • Web UI: Notification triggers for package detections.
    • Web UI: Enable Analytics for all cameras.
    • Web UI: Mark timelines in parts, where recording has lowered quality due to connectivity.
    • Add Smart Detection support to the G4-Instant.
    • Improve overall memory & CPU consumption.
    • Fallback to different recording quality if other is not available.
    • Send notifications when HDD I/O slowness is detected.
    • AI-Series: Improve image quality (addressing bluish images in the evening).
    • G4-Instant: Improve audio quality (increasing the mic sensitivity).
    • G4-PTZ: More accurately center position when user clicks it via PTZ mouse control.
    • Wireless Cameras: Less jumpy (roaming to) between different APs.
    • G4 Doorbell Pro: Allow to work with 8 VAC transformer + Chime + USB POE Accessory.

    Bugfixes

    • Web UI: Allow smaller player window size for 1:1 cameras.
    • Web UI: Fix hidden camera dropdown in analytics page on certain sized browsers.
    • Web UI: Fix issue where it would show wrong storage capacity in dashboard.
    • Web UI: Fix issue where storage distribution was showing as 0%.
    • Web UI: Fix inaccurate storage capacity in the devices list.
    • Web UI: Prevent accidentally creating duplicate live views.
    • Web UI: Hide camera status light settings if they are not supported.
    • Web UI: Show last motion for sensor in device list.
    • Fix issue where notifications were send to non-privileged users.
    • Fix Application starting issue after UNVR firmware upgrade.
    • Fix rare issue where a G4-Doorbell might prompt for device password during adoption.
    • Fix when device shows as adoptable when it is adopted by other console.
    • Fix distribution of recording types.
    • Fix inconsistent length of audio levels.
    • Fix incorrect managed state of factory devices.
    • Fix application restarting when unmanaging a camera and deleting its footage.
    • Remove an unmanaged device from the device group.
    • Preserve user permissions for live view after an owner is transferred.
    • Persist video footage for ring events when detections only mode is enabled.
    • G3-Instant / G4-Instant: Fix an issue that the camera can't go back online due to Protect WSS connection failure.
    • G4-Doorbell / G4-Doorbell-Pro: Disable startup sound if the camera is adopted.
    • G4-Doorbell / G4-Doorbell-Pro: Disable red LED and sound for wireless disconnection status.
    • G3-Instant: Fix image artifact at bottom.
    • G4-PTZ: Fix PTZ motion detect with negative event duration.
    • G4-Instant: Fix av sync issue.
    • Smart Audio: Fix audio loudness malfunction.
    • G4-Instant: Fix video date time overlay misaligned with Timeline (due to video PTS drifting).

    Additional information

    If you experience any issues with this release, please reach out to our support team at help.ui.com.

  • Ja moin, jemanden aufgefallen das die neue Protect App jetzt endlich auch die MULTI VIEWS unterstütz? Läuft bei mir aufm Tablet wunderbar - statt Viewport

    Keller: 100Mbit --> Vigor 165, UDMP, Switch Pro 24 POE 400W, FB 7490 (DECT Basis)
    Dach: U-LTE, 2x Flex, 3xFlex Mini, Zyxel NR7101 Outdoor (200/100 Mbit über 5G)
    Garage: NanostationLoco AC, Switch 8 150W
    AP's: In-Wall, 2x U6 Mesh, 2x AC-Mesh
    Protect: 2x G3 Bullet, G4 Bullet, 3x G3 Flex, 6x G3 Instant

  • Müsste heute downgraden und Backup einspielen ... Mit Android App läuft auch mit der alten Version multi View . Keine Ahnung was schief lief ich warte erstmal

    Keller: 100Mbit --> Vigor 165, UDMP, Switch Pro 24 POE 400W, FB 7490 (DECT Basis)
    Dach: U-LTE, 2x Flex, 3xFlex Mini, Zyxel NR7101 Outdoor (200/100 Mbit über 5G)
    Garage: NanostationLoco AC, Switch 8 150W
    AP's: In-Wall, 2x U6 Mesh, 2x AC-Mesh
    Protect: 2x G3 Bullet, G4 Bullet, 3x G3 Flex, 6x G3 Instant

  • UniFi Protect Application 2.1.2

    https://community.ui.com/releases/UniFi-Protect-Application-2-1-2/77e5d214-4dd0-40f9-82b9-fa3cf628d737


    Overview

    To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

    • UDM-Pro 1.10.4
    • UDM-Pro-SE 2.2.4
    • UNVR / UNVR PRO 1.4.9
    • UCK-G2-PLUS 2.1.11
    • UDR 2.2.12

    To use this version, we recommend using following mobile app versions (or newer):

    Bugfixes

    • Fix application restart loop in some rare cases.
    • Web UI: Remove camera snapshot jitter (e.g. on Firefox).
    • Web UI: Fix keyboard navigation not working after clicking on zoom.
    • Web UI: Fix missing IR settings for older camera models.

    Additional information

    If you experience any issues with this release, please reach out to our support team at help.ui.com.

  • UniFi Protect Application 2.2.2

    https://community.ui.com/releases/UniFi-Protect-Application-2-2-2/b24dda8f-f945-4eda-85f8-e095062e7bbd


    Improvements

    • Web UI: Add option to export timelapse video.
    • Web UI: Add an option to turn off insights (motion analytics) to reduce system load on large deployments.
    • Web UI: Allow exporting clips shorter than 30 seconds on the Playback page.
    • Web UI: Improve streaming performance when Auto Quality is used.
    • Web UI: Improve Livestream when the camera is on slow WiFi.
    • Web UI: Add more WiFi information to the wireless camera.
    • Web UI: Improve Livestream behavior on safari.
    • Web UI: Minor UX Improvements.
    • Web UI: Show SSD icon when UDM-SE/UDR doesn't have an HDD/SDcard inserted.
    • Improve video start-up time for wireless cameras.
    • Reduce application memory usage.
    • Show default Liveview from child console.
    • Show stacked consoles on LCM if the consoles are stacked.
    • System: Improve camera firmware update process.
    • Streaming: Improve stream startup times.

    Bugfixes

    • Web UI: Fix camera orientation toggles when auto-rotate is toggled.
    • Web UI: Fix some UX issues when Sensor motion is not detected.
    • Web UI: Fix the issue where live streams don't restart after the connection was re-established.
    • Web UI: Fix the “Not scheduled to record” issue when viewing detections only on the Playback page.
    • Web UI: Fix page reloading when going from Event Player to Playback.
    • Web UI: Fix camera snapshot positioning while it is loading.
    • Web UI: Fix missing IR settings for older camera models.
    • Web UI: Fix inaccurate Storage Utilization in some cases.
    • Web UI: Fix an issue where audio is not getting muted for G4 Doorbell Pro.
    • Web UI: Fix an issue that caused video streams to restart when expanding video in the live grid.
    • Web UI: Fix a bug that causes streams to not start when switching between cameras in playback.
    • Web UI: Fix bug where prev/next buttons didn’t work in the popup player.
    • Web UI: Show the correct device model on the playback page.
    • Web UI: Show an error if the group name is not entered.
    • Web UI: Show only one toast per multiple detection deletions.
    • Web UI: Show the default viewport name if a name is not added.
    • Web UI: Disable the download button for deleted ranges in playback.
    • Fix an issue where unmanaging camera might cause application restart.
    • Fix issue where zoom slider won’t update for PTZ zoom position using keyboard shortcuts.
    • Fix rare application crashes.
    • Fix unable to remove selected detection clips.
    • Fix UP-Sense notification value rounding.
    • Fix camera FW not updating when using the Release Candidate release channel.
    • Fix bug which caused database corruption after ungraceful console shut down.
    • Fix bug that didn’t allow exporting videos for secondary NVR in remote connections.
    • Fix bug that caused “Recovery code” for some cameras not to change.
    • Smart Detect: Mask out overlay position according to heatmap size.
    • Smart Detect: Fix thumbnail artifact.
    • G4-PTZ: Reduce the sensitivity for Pan/Tilt control.
    • G4-Instant: Fix pop sound issue
    • Streaming: Fix issue with bitrate going too high using Auto Quality.
    • Other stability fixes & improvements.

    Additional information

    If you experience any issues with this release, please reach out to our support team at help.ui.com.

    • Super seltsam ne Final mit verweis das es nur mit der Beta OS3 geht :question_mark::question_mark::question_mark:

      UniFi Protect Application 2.6.17

      https://community.ui.com/relea…b7-46c2-8ac8-fc16c5c6d1bf


      Overview

      This version requires you to have UniFi OS version 3.0 or newer.

      Improvements

      • Web UI: Update the adoption with recovery code modal.
      • Improve database migration stability.
      • Improve “Autolink” stability.
      • Improve device adoption reliability.
      • Update the camera firmware version to 4.57.36.
      • Improve wireless connectivity.
      • G4-Instant: Improve firmware update process.
      • Update the viewport firmware version to 1.2.65.
      • Add support for stackable UNVRs.

      Bugfixes

      • Web UI: Fix incorrect tooltip information for Export/Import configuration.
      • Web UI: Fix duplicated Device Group names.
      • Web UI: Fix the Zoom slider not updating in Live Views.
      • Web UI: Fix unreliable audio levels.
      • Web UI: Disallow adopting door locks, sensors, and chimes that are managed by other consoles.
      • Fix a rare stream lagging issue.
      • Fix unable to receive “Package” detection notifications for G4 Doorbell.
      • Fix a rare start time of recording issue.

      Known issues

      • Web UI: Misleading "resolution lowered" for wired cameras.
      • Streaming: Unable to view the high-quality live stream on the LiveView grid when it contains more than 6 cameras. (since at least 2.6.x)