UA-PRO Firmware 2.2.153

https://community.ui.com/releases/UA-PRO-Firmware-2-2-153/699c7954-0d85-48b4-94fa-e8b1117e9cf1

Overview

This version focuses on optimizing the UX of typing PIN Code on the device and fixing some known issues.

Improvements

• Optimized the UX of inputing PIN Code by enlarging the on-screen keyboard touch area
• Optimized the Capture to reduce the capture recording failure.
• Support auto restarting the UA-Pro’s built-in application when crashes detected.
• Updated the wallpaper.

Bugfixes

• Fixed an issue that caused unlocking doors by using UID mobile access to fail.
• Fixed an issue that caused adopting UA-Pro to fail under specified conditions.
• Fixed UA Pro crash issues.
• Other bug fixes.

Additional information

Method to update the firmware of UniFi Access device to Alpha and Early Access versions.

• Make sure the firmware of UniFi OS Console meets the specified version requirements:
• UDM Pro: V1.12.15 or later.
• CKP/UDM SE: V2.4.5 or later.
• Go to UniFi OS > Click Settings.
• Change the Release Channel to Alpha or Early Access.
• Go to the UniFi Access application.
• Click Devices.
• Click the Download icon right by the Firmware column.

UniFi Access Reader Pro 2.2.158

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-2-158/0eda5fc4-adb1-4a24-a12c-1ee1b4aae823

Bugfixes

• Fixed an issue that prevented the offline UA-Pro from auto going back online

UniFi Access Reader Pro 2.3.173

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-3-173/22eeeae1-bcb1-419c-bf87-535eaa3da20a

Improvements

• Optimized the Mobile Tap of the UID door access method.
• Optimized the video recording feature: Captures.

Bugfixes

• Fixed an issue where a UA Pro could not be adopted occasionally after it was removed from the UniFi Access application.
• Fixed an issue where scanning an NFC card once might result in two scanning records.
• Fixed an issue where there was a small chance that UA cards could not be registered.
• Fixed an issue where incorrect access card icons were displayed when cards of different types were registered.

UniFi Access Reader Pro 2.3.175

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-3-175/6b9480e2-fa97-4ce0-9325-f6dab713422b

Bugfixes

• Fixed an issue where some third-party access cards could not be recognized after upgrading to UA Pro 2.3.173.

UniFi Access Reader Pro 2.3.178

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-3-178/7b8c5928-48de-4bcb-992e-c9884910bc4d

Bugfixes

• Fixed an issue where the doorbell feature was sometimes automatically triggered.
• Fixed an issue where UA Cards were sometimes mistakenly recognized as third-party cards.

UniFi Access Reader Pro 2.4.182

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-4-182/b52d83f7-4572-4b3b-aad2-6f96880a5f86

Overview

UA Pro 2.4.182 has improved the connection speeds for remote view and remote call, allows users to reset their UA Pros by removing them from the UniFi Access application, and fixed issues related to greetings messages and mobile access.

Improvements

Doorbell & Remote View

• Optimized the connection speeds for remote view and remote call when the PCs or mobile devices and UniFi Hosts are connected to the same local network.
• Requires UniFi Access application v1.5.11
• Requires UniFi Access app for Android v1.2.13
• Requires UniFi Access app for iOS v1.2.8

Devices

• UA Pro will be automatically reset when it is removed from the UniFi Access application.

Bugfixes

Settings

• Fixed an issue where greeting messages could not be disabled.

Mobile Access

• Fixed an issue where users who unlocked doors using Mobile Tap were unable to use Mobile Button for a while.

UniFi Access Reader Pro 2.4.185

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-4-185/fc3e0d42-6bf2-457d-b7b7-fa65599d01c8

Improvements

Touch Screen

• Optimized the logic of screen auto-click events to prevent unresponsive clicks or doorbell auto-ringing.

Bugfixes

Doorbell

• Fixed the issue that Remote View and Remote Call cannot be connected in UID when using UA-Pro v2.4.182.

UniFi Access Reader Pro 2.4.187

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-4-187/ff8296ee-8d44-4296-ac86-0f8258a4b122

Bugfixes

Door Unlock

• Fixed an issue where doors sometimes could not be unlocked using NFC cards.

UniFi Access Reader Pro 2.4.199

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-4-199/33a0a671-24ee-42b4-ac18-983977708072

Bugfixes

Door Unlock Recordings

• Fixed an issue where door unlock videos sometimes could not be recorded.

UniFi Access Reader Pro 2.4.205

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-4-205/4ab410ac-ac28-412f-a7eb-1134af80f362

Bugfixes

• Fixed the issue where either of the following occurred when doorbells were answered using the UniFi Access mobile app:
• The live view and remote door unlock features did not work.
• There was no sound in the live view.

UniFi Access Reader Pro 2.5.208

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-5-208/4780eb83-7598-417f-9833-ff8a488f33df

Improvements

Screen

• Removed admin settings and only allow management in the UniFi Access application and mobile app.
• The console name will no longer be displayed.

Bugfixes

• Fixed the issue where the device would be mistakenly shown as offline in the UniFi Access application.
• Fixed the issue where profile picture updates for UI accounts were not being synced properly to the device.

UniFi Access Reader Pro 2.6.220

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-6-220/17514838-e418-4642-99d5-e88c6cfff6d4

Bugfixes

Doors Unlock

• Fixed the issues where doors sometimes could not be unlocked using authorized PINs or NFC cards. Issues includes:
• Unlocking a door required multiple attempts to scan an NFC card or input a PIN.
• The reader didn’t respond to the NFC card scanning.
• The reader incorrectly indicated an authorized NFC card as an “Invalid card”. To resolve this issue, please update your Access application to v1.6.8 or above and Identity Enterprise Agent to v1.55.1 or above.

Device

• Reduced device overheating and lag when detection sensitivity is set to 2 meters.

Others

• Fixed the delayed response issue in the LED indicator, indication sound, and display when scanning an NFC card.
• Fixed the issue where the device’s time couldn’t sync the change between winter and summer time from the UniFi Console.

Known issues

The following two issues will occur when UA Pro is used with UA Hub. They will be fixed in an upcoming UA Hub 4.2.x update.

• Issue 1: The UA Pro screen fails to show the door-opening animation when a door is unlocked using the remote unlock feature on the UniFi Access application or mobile app.
• Issue 2: After someone triggers the doorbell, the doorbell animation and sound on UA Pro persist even after a door is unlocked by clicking the Unlock button on the UniFi Access application prompt. The person at the door must manually dismiss the doorbell or wait for it to time out (after 1 minute) for the animation and sound to stop. This issue does not occur if Unlock is clicked after answering the doorbell.

UniFi Access Reader Pro 2.6.222

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-6-222/19023765-8de1-46d3-960a-fd4657452263

Bugfixes

• Fixed the issue where admins encountered the “Admin Viewing Feed” error message, triggered by a camera falsely indicating occupancy, after a failed initial connection. This prevented them from remotely viewing live feeds in the Access Application.
• Fixed the following known issues that occurred in v1.1.134.
• Issue 1: The UA Pro screen fails to show the door-opening animation when a door is unlocked using the remote unlock feature on the UniFi Access application or mobile app.
• Issue 2: After someone triggers the doorbell, the doorbell animation and sound on UA Pro persist even after a door is unlocked by clicking the Unlock button on the UniFi Access application prompt. The person at the door must manually dismiss the doorbell or wait for it to time out (after 1 minute) for the animation and sound to stop. This issue does not occur if Unlock is clicked after answering the doorbell.

UniFi Access Reader Pro 2.7.229

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-7-229/7ecd4e05-36f0-4353-9ecd-aaa3e7b57b34

Improvements

• Improved recording reliability, reducing instances where recordings were not captured.
• Allow up to 9 admins to simultaneously view live video feeds, minimizing video access issues.
• Added support for specifying the duration for capturing videos before and after a door opening event (requires Access application 1.21.1 or later).
• Added support for customizing the door unlock recordings ratio (4:3 or 16:9) in the Access application > Devices > Readers > select a reader > Settings > Video Capture Ratio.
• Implemented an automatic timeout feature for remote viewing, set at 120 seconds, to prevent performance issues caused by admins forgetting to exit the remote view. Admins can customize this duration in Access application 1.21.1 or later.
• Optimized the mobile door access methods' door detection.

UniFi Access Reader Pro 2.7.235

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-7-235/91d5e187-aef6-4969-96f0-dfef920cb4ca

mprovements

• Enhanced the profile image loading speed to guarantee accurate display after a user updates their picture and scans a card shortly afterward.
• Improved recording reliability, reducing instances where recordings were not captured.
• Allow up to 9 admins to simultaneously view live video feeds, minimizing video access issues.
• Added support for specifying the duration for capturing videos before and after a door opening event (requires Access application 1.21.1 or later).
• Added support for customizing the door unlock recordings ratio (4:3 or 16:9) in the Access application > Devices > Readers > select a reader > Settings > Video Capture Ratio.
• Implemented an automatic timeout feature for remote viewing, set at 120 seconds, to prevent performance issues caused by admins forgetting to exit the remote view. Admins can customize this duration in Access application 1.21.1 or later.
• Optimized the mobile door access methods' door detection.

Bugfixes

• Fixed the unexpected mirroring of the recorded videos.

UniFi Access Reader Pro 2.7.237

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-7-237/0d878a3a-a8a1-46d8-b32d-8622a379b424

Bugfixes

• Fixed the issue where doors sometimes failed to unlock when the same NFC card was scanned repeatedly or when different cards were scanned consecutively within a short period.
• Fixed the issue where doorbell calls echoed when answered on the UniFi Access mobile app or application.

UniFi Access Reader Pro 2.7.238

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-7-238/5217b787-e2f3-475f-b48d-9e72c509598f

Improvements

• Optimized bidirectional audio transmission.

Known issues

• The door unlock recording feature cannot record sound from the device's speaker.

UniFi Access Reader Pro 2.8.19

https://community.ui.com/releases/UniFi-Access-Reader-Pro-2-8-19/b2d8c375-5c25-4ee2-91e0-8746c32759a7

Improvements

• The screen now displays the reader's name.

Bugfixes

• Fixed the issue where the screen occasionally went black, though NFC card scanning remains unaffected.
• Fixed the issue where sometimes a doorbell call continued ringing even after the call was canceled.
• Fixed the issue where door detection sometimes failed, causing door unlock failure using the UniFi Identity mobile app.
• Fixed the issue where UA Pro occasionally could not be updated despite being restarted.