UA-Hub Firmware 4.0.13.20

https://community.ui.com/releases/UA-Hub-Firmware-4-0-13-20/38b0d13d-2d98-4bc7-974a-51207c12aa31

Overview

This release focuses on bug fixes.

Improvements

• Enhanced the users carrying capacity. This version has currently passed a 10,000-user test.

Bugfixes

• Fixed an issue that caused the door unlocking failure even though the users’ identity is authenticated.
• Fixed an issue that caused the door unlocking failure during upgrading access policies.
• Fixed an issue that prevented the doors from remaining open when the unlock schedule is enabled.
• Other bug fixes.

Additional information

• To enhance users carrying capacity, please upgrade your UniFi Access application and UniFi OS Consoles to the following versions:
• Access Application: v1.4.3
• UDM Pro: v1.12.22
• CKP/UDM SE: v2.5.4 (Alpha Channel)

UniFi Access Hub 4.0.14.15

https://community.ui.com/releases/UniFi-Access-Hub-4-0-14-15/c3f11bef-1741-402f-b06c-f26235ccdf50

Improvements

• Support wiring chimes to UA-Hub.
• Support setting DPS input terminal in the UniFi Access application.

Additional information

1. For wiring chimes to UA-Hub, we provide two methods for different scenarios:

• Scenario 1: You have installed one UA-Pro outdoor and one chime indoor, and you want the chime inside to ring when someone makes a call on UA-Pro.

1. Launch your UniFi Access application.
2. Click Devices and select a hub. A panel showing the hub details will appear.
3. Click Ports.
4. Scroll down to AUX Mode and select Doorbell Mode.
5. Click Save.

• Scenario 2: You have installed the chime indoors, and you want the chime inside to ring when someone presses the doorbell push button outside.

1. Launch your UniFi Access application.
2. Click Devices and select a hub. A panel showing the hub details will appear.
3. Click Ports.
4. Scroll down to AUX Mode and select Doorbell Mode.
5. Scroll down to REN Mode and select Doorbell Mode.
6. Click Save.

2. To set the DPS input terminal, follow the steps below:

1. Launch your UniFi Access application.
2. Go to Devices.
3. Select a UA-Hub and click Ports.
4. Scroll down to the Input Terminal section.
5. Select High Active NO or Low Active NC from the DPS dropdown menu.

Note: Requires UniFi Access application v1.4.6 or above.

UniFi Access Hub 4.1.2.12

https://community.ui.com/releases/UniFi-Access-Hub-4-1-2-12/6851dd03-7efd-4471-8faa-553b1c726db1

Overview

UA Hub 4.1.2.12 enables admins to set the AUX DRY mode and the AUX POWERED mode separately, has optimized the UA Hub’s removal and LED behaviors, and fixed door unlock issues.

Improvements

AUX Behavior

• Added support for setting the AUX DRY mode and the AUX POWERED mode separately (requires the UniFi Access application v1.5.10 or later).
• The DRY Port can be set to three modes:
• Door Opener (Default)
• Alarm
• Chime
• The POWERED Port can be set to two modes:
• Alarm
• Chime (Default)
• When the AUX is in Alarm mode, an alarm will be triggered if a door is left open for too long.

Device Removal

• Removing a UA Hub from the Access application will also reset the hub.

LED Behavior

• Optimized the device’s LED behavior.

Bugfixes

• Fixed an issue where doors sometimes could not be unlocked.

UniFi Access Hub 4.1.3.8

https://community.ui.com/releases/UniFi-Access-Hub-4-1-3-8/8c2f0793-825a-486a-8506-62f3b3cb0279

Overview

UA Hub 4.1.3.8 has fixed the issues that occurred in v4.1.2.12.

Bugfixes

Alarm

• Fixed the issue where the alarm connected to the AUX port was erroneously triggered despite the door already being left unlocked as per the designated leave unlocked schedule.

Security

• Fixed the issue where the emergency evacuation mode could not be switched to the emergency lockdown mode.

UniFi Access Hub 4.2.2.0

https://community.ui.com/releases/UniFi-Access-Hub-4-2-2-0/65cb0fbc-dd0d-4e17-9ddd-08da627ce6bb

Improvements

New Features

• Added support for the following features in Access application > Devices > Location Hubs > select a Hub > Overview (requires the upcoming Access application v1.20.13 or later).
• Unlock doors for a specific duration.
• End the Leave Unlocked schedule ahead of time.
• Always keep doors locked. Users can only unlock doors remotely or by using a physical button.

Topology

• Improved the display of UA device topology in the Network application, ensuring that the connection of readers to the UA Hub within the topology is accurately represented.

Bugfixes

• Fixed the issue where doors sometimes could not be unlocked.

Known issues

• Updating UA Hubs may sometimes fail. When this occurs, please attempt the update again

UniFi Access Hub 4.2.4.0

https://community.ui.com/releases/UniFi-Access-Hub-4-2-4-0/f90bac66-de7e-4ace-afe5-0e32a978942b

Bugfixes

• Fixed the issue where a door could not be unlocked remotely when its AUX port is set as Door Opener and its lock or door opener is connected to this port.

UniFi Access Hub 4.2.9.0

https://community.ui.com/releases/UniFi-Access-Hub-4-2-9-0/9b73d65a-a997-4f61-891c-7d4bbb3ff756

Bugfixes

• Fixed the issue where the doors were sometimes unlocked automatically.

UniFi Access Hub 4.3.7.0

https://community.ui.com/releases/UniFi-Access-Hub-4-3-7-0/098131f4-0574-453a-af92-2d1dc93e0216

Improvements

• Now the Emergency mode takes immediate effect upon activation (requires upcoming Access application 1.21.8).
• Now updates on users, visitors, NFC cards, and door access policies can be synced to the device immediately (requires Access application 1.21.4 or later).

UniFi Access Hub 4.3.8.0

https://community.ui.com/releases/UniFi-Access-Hub-4-3-8-0/9298cf54-b77b-468c-a43b-a73efbefc49f

Improvements

• Adjusted the total PoE power budget limit to 45W.

UniFi Access Hub 4.4.4.0

https://community.ui.com/releases/UniFi-Access-Hub-4-4-4-0/89efac05-f539-4127-87af-a684410f5896

Bugfixes

• Fixed the PoE output power drop issue during UA Hub restart. (UA Hub Door is not affected by this issue.)
• Fixed the issue where activating Emergency Evacuation while Leave Unlocked is still effective caused Emergency Evacuation to deactivate when Leave Unlocked expired.
• Fixed the following issues caused by the device crash:
• Users could not unlock doors within a brief timeframe.
• The device update initially failed but was successful upon retrying.