UniFi Access Elevator Hub 4.x.x.x

**BlackSpy** · October 17, 2022 at 3:35 PM

UniFi Access Hub Elevator 4.0.14.17

Support switching the relay mode of UA-Hub-Elevator between Fail Secure and Fail Safe via UniFi Access application v1.4.7 (coming soon). Refer to the Additional Information below for details.
Access Logs now record the policies applied when users access elevators.

Fixed an issue where certain settings of the removed elevators were not reset to default.

The wiring methods of the two different UA-Hub-Elevator relay modes and their behaviors are:

Fail Secure: When selected, an elevator remains locked during a power outage. Please wire your elevator to the NC and COM ports of the UA-Hub-Elevator when applying this mode.
Fail Safe: When selected, an elevator remains unlocked during a power outage. Please wire your elevator to the NO and COM ports of the UA-Hub-Elevator when applying this mode.

**BlackSpy** · February 6, 2023 at 12:31 PM

Support the Unlock Schedule feature (requires UniFi Access application 1.5.9).

Fixed an issue where the elevator did not respond when a one-time visitor scanned their authorized access card and pressed the floor button.

**BlackSpy** · December 4, 2024 at 1:30 PM

UA-Hub-Elevator 4.7.3.0 includes the following improvements and bugfixes.

Optimized the hub's stability.
Optimized the door unlock response speed.
Optimized Mobile Unlock performance. Requirements:
UniFi OS 4.1.9 or later
Access 2.3.10 or later
Access Reader
UA-Pro 2.9.7.0 or later
UA-G2-Pro 1.5.4.0 or later
UA-Intercom 1.3.22.0 or later
UA-G2 3.12.9.0 or later
UA-G3 3.12.9.0 or later
UA-Lite 3.12.9.0 or later
UA-G3-Flex 1.2.7.0 or later
UniFi Identity Endpoint
iOS 1.1.3 or later
Android 1.1.4 or later
Identity Enterprise app
iOS 0.78.5 or later
Android 0.79.1 or later
Support setting the hub's Emergency trigger level to "Close Active (NO)" or "Open Active (NC)" in the Access application > Devices > select the hub > Settings > Terminal Manager. Requires the Access application 3.0.10 or later.

Fixed an issue where doors sometimes could not be unlocked.
Fixed an issue where the adopted reader screen did not display the emergency alert if the emergency mode triggered by the Access application differed from the emergency mode set in Devices > select the hub > Settings > Terminal Manager > Emergency.
Fixed an issue where some hub settings did not revert to default after the hub was removed from the Access application.

Download links

UA-Hub-Elevator