Beta UniFi Access Point 6.5.x

Es gibt 97 Antworten in diesem Thema, welches 25.995 mal aufgerufen wurde. Der letzte Beitrag () ist von arteck.

    Ein großer Versionssprung!!?? Glieder es mal aus.

    UniFi Access Point 6.5.8


    https://community.ui.com/releases/UniFi-Access-Point-6-5-8/671c3a94-7274-4403-b10b-cccbea47021c


    Overview

    * This release is only for Gen2/Gen3/Gen4/Gen5.

    Improvements

    • [UAP] Eliminate client connectivity downtime when device name (hostname) is changed.
    • [UAP] Make band steering less strict.
    • [UAP] Improve overall stability by fixing kernel crashes.
    • [UAP] Improve UAP<->Network Application connection stability to avoid devices going offline randomly.
    • [UAP] Ensure 5GHz radio broadcasts before 2.4GHz radio, except if DFS channels are in use.
    • [UAP] Update lldpd package to version 1.0.15.
    • [UAP-Gen4/Gen5] Skip U-NII-3 channels in UK and Latvia when auto channel is configured. Latvia regulatory allows low power only; UK has a lot of outdoor interference on these channels.

    Bugfixes

    • [UAP] Fix incorrect manual firmware update URL leading to the AP going offline in the Network Application.
    • [UAP] Fix IPv6 inform address resolution not working (affects L3 adoptions).
    • [UAP-Gen2/Gen3] Fix incorrect TX Retries being reported by UAPs. More fixes coming in future Network application releases.
    • [UAP-Gen2/Gen3] Fix neighbor reports occasionally not being reported.
    • [UAP-Gen2/Gen3] Fix BSS Transition toggling failing intermittently.
    • [UAP-Gen4] Fix 5GHz radio occasionally not broadcasting after temporarily losing its wired uplink when meshing is enabled.
    • [UAP-Gen4/Gen5] Fix SNMP polling not working in some cases.
    • [UAP-Gen4/Gen5] Fix WPA1 connectivity issues at GTK rekey interval.
    • [UAP-Gen4/Gen5] Fix 5GHz radio broadcasting before DFS CAC occasionally without allowing new connections.

    Additional information

    • U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
    • Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
    • Please refer to this article to find more details on how to identify your Access Point generation.
    • Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
    • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).


    Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

    • Network Application version.
    • Firmware version (previous and current).
    • Device model(s).

    Download links

    UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

    UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

    UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

    U6-Lite | md5sum | sha256sum

    U6-LR | md5sum | sha256sum


    U6-LR leuchtet nun dauerhaft weiß, obwohl LED abgeschaltet ist

    Hier keine Probleme

    Vigor 167 - OPNsense- 4x US-8-60W - US-8-150W- US-24-250W - 4 x UAP-AC-PRO- 4 x UAP-AC-M 6 x USW-Flex-Mini - Proxmox-Cluster -TrueNas- Fhem- Homematic und jede Menge anderen Blödsinn der eigentlich nur Strom frisst aber mir freude macht :smiling_face_with_sunglasses:

    Diese Beta ist wirklich schlecht und ich gehe auf 6.2.44 zurück.


    Meine U6-LR sind besonders davon betroffen.

    Einmal editiert, zuletzt von thghh ()

    thghh

    was hast du den für Probleme ?

    Vigor 167 - OPNsense- 4x US-8-60W - US-8-150W- US-24-250W - 4 x UAP-AC-PRO- 4 x UAP-AC-M 6 x USW-Flex-Mini - Proxmox-Cluster -TrueNas- Fhem- Homematic und jede Menge anderen Blödsinn der eigentlich nur Strom frisst aber mir freude macht :smiling_face_with_sunglasses:

    Das sich verschiede Endgeräte nicht mehr verbinden oder völlig wirre IP Daten haben.


    Mit der 6.2.44 ist wieder alles stabil und ok und die AP sind auch wieder dunkel ohne Beleuchtung.

    thghh

    Das kann ich nicht bestätigen.

    Mit der 6.2.44 gabs kleinere Probleme. Clients waren ab und zu offline. Die 6.5.x ist zumindest bei mir wieder stabiler als die letzte.

    Nur mein LG TV verliert aber immer die Verbindung. Hat aber mit der 7.3.x Controllerversion was zu tun. Das Probleme ist erst aufgetaucht als ich die Controllersoftware von 7.2.x auf 7.3.x aktualisiert habe.

    Bei mir läuft die Version ohne Probleme. Iphones, diverse Smarthome Geräte, Shellys usw. Alle laufen wie gewohnt.

    Auch bei mir läuft alles ohne Probleme.

    Vigor 167 - OPNsense- 4x US-8-60W - US-8-150W- US-24-250W - 4 x UAP-AC-PRO- 4 x UAP-AC-M 6 x USW-Flex-Mini - Proxmox-Cluster -TrueNas- Fhem- Homematic und jede Menge anderen Blödsinn der eigentlich nur Strom frisst aber mir freude macht :smiling_face_with_sunglasses:

    Zitat von gierig

    Alles Gutbei mir , alles hat sich wieder verbunden, keiner der APs leuchtet...


    Das Dauerleuchten betrifft nur die U6-LR

    UniFi Access Point 6.5.9

    https://community.ui.com/releases/UniFi-Access-Point-6-5-9/98b34c48-2aac-4758-ab9e-39ef751489ef


    Overview

    * This release is only for Gen2/Gen3/Gen4/Gen5.

    Improvements

    • [UAP] Add a way for standalone APs to be detected distinctly from console adopted UAPs.
    • [UAP-Gen2/Gen3] Significantly speed up RF Scan.
    • [UAP-Gen2/Gen3] Eliminate client connectivity downtime when configuring Minimum RSSI and Interference Blocker.
    • [UAP-Gen2/Gen3] Stop advertising rates lower than the Minimum Data Rates configured in the 'Supported Rates' IE.

    Bugfixes

    • [UAP] Fix debug terminal occasionally not working.
    • [UAP-Gen4] Fix AP getting stuck when running an RF Scan.
    • [U6-LR] Fix AP having a white LED when configured the LED is set to Off.

    Additional information

    • U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
    • Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
    • Please refer to this article to find more details on how to identify your Access Point generation.
    • Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
    • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).


    Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

    • Network Application version.
    • Firmware version (previous and current).
    • Device model(s).

    Download links

    UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

    UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

    UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

    U6-Lite | md5sum | sha256sum

    U6-LR | md5sum | sha256sum


    UniFi Access Point 6.5.10

    https://community.ui.com/releases/UniFi-Access-Point-6-5-10/a37a3ce6-3caa-484f-b032-074dd163e339


    Improvements

    • [UAP-Gen2/Gen3/Gen6] Eliminate client connectivity downtime when configuring Channel Width.
    • [UAP-Gen2/Gen3/Gen6] Eliminate client connectivity downtime when configuring Minimum RSSI and Interference Blocker. *
    • [UAP-Gen2/Gen3/Gen6] Stop advertising rates lower than the Minimum Data Rates configured in the 'Supported Rates' IE. *
    • [UAP-Gen6] Significantly speed up RF Scan
    • [U6-Enterprise(-IW)] Hide the 'wifi6e-control' SSID now that Android 12 has fixed 6GHz association bugs that existed in Android 11.

    * Added due to this being the first 6.5 release for Gen6, it was already available for the other generations.

    Bugfixes

    • [UAP-Gen4/Gen5] Fix blocked clients occasionally being able to connect.
    • [UAP-Gen2/Gen3/Gen6] Fix neighbor reports occasionally not being reported. *
    • [UAP-Gen2/Gen3/Gen6] Fix BSS Transition toggling failing intermittently. *
    • [UAP-Gen6] Fix new configuration not being applied occasionally.
    • [U6-Pro] Lower the power requirement to PoE (802.3af) instead of PoE+ (802.3at). Updates to the store listing and datasheet coming shortly.

    * Added due to this being the first 6.5 release for Gen6, it was already available for the other generations.

    Additional information

    • U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
    • Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
    • Please refer to this article to find more details on how to identify your Access Point generation.
    • Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
    • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).


    Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

    • Network Application version.
    • Firmware version (previous and current).
    • Device model(s).

    Download links

    UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

    UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

    UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

    U6-Lite | md5sum | sha256sum

    U6-LR | md5sum | sha256sum

    U6-Pro/Mesh/IW/Extender/Enterprise/Enterprise-IW | md5sum | sha256sum


    Danke 1

    UniFi Access Point 6.5.14

    https://community.ui.com/releases/UniFi-Access-Point-6-5-14/4c5783d6-9085-4c51-a218-fe141c8d4c32


    Improvements

    • [UAP-Gen2/Gen3/Gen6] Force enable 802.11d country advertisement in beacons.
    • [UAP-Gen2/Gen3/Gen6] Improve neighbor reports.

    Bugfixes

    • [UAP] Fix debug terminal not working.
    • [UAP-Gen2/Gen3/Gen6] Fix incorrect RSSI being reported for some BSSIDs in neighbor reports.
    • [UAP-Gen3] Fix kernel crash to improve overall stability.
    • [UAP-XG/UWB-XG] Fix wireless adoption failing when unadopted APs have high uptime.
    • [UAP-Gen4] Fix certain 2.4GHz clients being unable to pass traffic after association.

    Additional information

    • U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
    • Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
    • Please refer to this article to find more details on how to identify your Access Point generation.
    • Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
    • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).


    Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

    • Network Application version.
    • Firmware version (previous and current).
    • Device model(s).

    Download links

    UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

    UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

    UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

    U6-Lite | md5sum | sha256sum

    U6-LR | md5sum | sha256sum

    U6-Pro/Mesh/IW/Extender/Enterprise/Enterprise-IW | md5sum | sha256sum


    UniFi Access Point 6.5.15

    https://community.ui.com/releases/UniFi-Access-Point-6-5-15/4e41c580-5583-4106-a021-ebc29062427f


    Improvements

    • [UAP] Speed up adoption time significantly. Eliminate rare cases of long adoption times.
    • [UAP-Gen4/Gen5] Eliminate client connectivity downtime when changing the channel width and minimum RSSI settings.

    Bugfixes

    • [UAP] Fix wireless uplink selection logic incorrectly prioritizing uplinks with a weak signal level.
    • [UAP] Fix Withings Scale connection instability when band steering is in-use.
    • [UAP] Fix L3 inform URL being overwritten by default inform URL in some cases.
    • [UAP] Fix APs cycling between 'Getting Ready' and 'Online' continuously when Lock to AP is in-use and any AP goes down (e.g. for a firmware update). This led to all clients getting disconnected randomly.
    • [U6-LR] Fix iOS devices occasionally failing to connect.
    • [UAP-Gen6] Fix device occasionally getting stuck when applying configuration changes.
    • [UAP-Gen6] Fix 5GHz radio not reporting its "DFS Wait/CAC" state, making it look like the 5GHz radio is disabled after a channel change.

    Additional information

    • U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
    • Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
    • Please refer to this article to find more details on how to identify your Access Point generation.
    • Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
    • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).


    Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

    • Network Application version.
    • Firmware version (previous and current).
    • Device model(s).

    Download links

    UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

    UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

    UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

    U6-Lite | md5sum | sha256sum

    U6-LR | md5sum | sha256sum

    U6-Pro/Mesh/IW/Extender/Enterprise/Enterprise-IW | md5sum | sha256sum


    UniFi Access Point 6.5.16

    https://community.ui.com/releases/UniFi-Access-Point-6-5-16/8d0e7901-3d56-4145-b5c7-3434e120dfce


    Improvements

    • [UAP-Gen2/Gen3/Gen6] Eliminate client connectivity downtime when changing the Multicast Enhancement, DTIM, UAPSD, and Broadcast Filter settings.
    • [UAP-Gen2/Gen3/Gen6] Improve Automatic Channel Selection to account for non-WiFi noise.
    • [UAP-Gen4/Gen5] Remove DFS radar detection for U-NII-3 channels in UK.

    Bugfixes

    • [UAP-Gen4/Gen5] Fix 5GHz not working in Kazakhstan.
    • [UAP-Gen6] Fix 6GHz connectivity not working with Samsung S21 Ultra, introduced in 6.5.1.

    Additional information

    • U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
    • Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
    • Please refer to this article to find more details on how to identify your Access Point generation.
    • Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
    • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).


    Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

    • Network Application version.
    • Firmware version (previous and current).
    • Device model(s).

    Download links

    UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

    UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

    UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

    U6-Lite | md5sum | sha256sum

    U6-LR | md5sum | sha256sum

    U6-Pro/Mesh/IW/Extender/Enterprise/Enterprise-IW | md5sum | sha256sum


    Gefällt mir 1