Hallo zusammen,
ich habe eim Problem beim Upgraden meines USG 3P auf ein USG 4Pro.
Mein Netzwerk wird von einem Cloud Key Gen2 Plus verwaltet, der im Layer 3 ist.
Ich kann das USG 4Pro auch ins Netzwerk einbinden, also es wird Adoptiert, doch im vorgang der Provesionierung bleibt er hängen.
Er gibt mir dann auch einen Alarm aus, das es einen Fehler gab mit der Konfiguration auf dem Gerät.
Wenn ich aber das USG 4Pro auf eine neues Seite im Controller einbinde, gibt es keine Probleme.
Nur mit der Seite und dem Bestehen Netzwerk.
Übersicht des Netzwerkes :
Hier die Logdatei aus dem USG 4Pro :
Feb 28 18:42:45 ubnt sshd[4354]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=192.168.16.6 user=Drachennest
Feb 28 18:42:56 ubnt zebra[762]: interface pppoe2 index 18 changed <POINTOPOINT,NOARP,MULTICAST>.
Feb 28 18:42:56 ubnt zebra[762]: interface pppoe2 mtu changed from 1492 to 1500
Feb 28 18:42:56 ubnt pppd[4012]: Connection terminated: no multilink.
Feb 28 18:42:56 ubnt zebra[762]: interface pppoe2 index 18 deleted.
Feb 28 18:42:57 ubnt ntpd[2919]: ntpd exiting on signal 15
Feb 28 18:42:59 ubnt ntpd[4868]: ntpd [email protected] Thu Jan 12 08:03:03 UTC 2023 (1)
Feb 28 18:42:59 ubnt ntpd[4869]: proto: precision = 26.379 usec
Feb 28 18:43:00 ubnt pppd[4884]: pppd 2.4.4 started by root, uid 0
Feb 28 18:43:01 ubnt ntpd_intres[4874]: host name not found EAI_NODATA: 0.ubnt.pool.ntp.org
Feb 28 18:43:01 ubnt ntpd_intres[4874]: host name not found EAI_NODATA: 1.ubnt.pool.ntp.org
Feb 28 18:43:01 ubnt ntpd_intres[4874]: host name not found: 2.ubnt.pool.ntp.org
Feb 28 18:43:01 ubnt ntpd_intres[4874]: host name not found: 3.ubnt.pool.ntp.org
Feb 28 18:43:03 ubnt ubnt-service-gui: starting the GUI service.
Feb 28 18:43:04 ubnt dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in.
Feb 28 18:43:04 ubnt dhcpd: Internet Systems Consortium DHCP Server 4.1-ESV-R8
Feb 28 18:43:04 ubnt dhcpd: Copyright 2004-2013 Internet Systems Consortium.
Feb 28 18:43:04 ubnt dhcpd: All rights reserved.
Feb 28 18:43:04 ubnt dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Feb 28 18:43:04 ubnt dhcpd: Wrote 0 class decls to leases file.
Feb 28 18:43:04 ubnt dhcpd: Wrote 0 deleted host decls to leases file.
Feb 28 18:43:04 ubnt dhcpd: Wrote 0 new dynamic host decls to leases file.
Feb 28 18:43:04 ubnt dhcpd: Wrote 1 leases to leases file.
Feb 28 18:43:04 ubnt dhcpd: Listening on LPF/eth0.2/74:ac:b9:db:e8:de/net_Managment_eth0_192.168.24.0-24
Feb 28 18:43:04 ubnt dhcpd: Sending on LPF/eth0.2/74:ac:b9:db:e8:de/net_Managment_eth0_192.168.24.0-24
Feb 28 18:43:04 ubnt dhcpd: Listening on LPF/eth0/74:ac:b9:db:e8:de/net_Tanzhaus_eth0_192.168.16.0-24
Feb 28 18:43:04 ubnt dhcpd: Sending on LPF/eth0/74:ac:b9:db:e8:de/net_Tanzhaus_eth0_192.168.16.0-24
Feb 28 18:43:04 ubnt dhcpd: Sending on Socket/fallback/fallback-net
Feb 28 18:43:05 ubnt pppd[4884]: Connected to 88:a2:5e:1e:29:8c via interface eth2.7
Feb 28 18:43:05 ubnt pppd[4884]: Connect: ppp0 <--> eth2.7
Feb 28 18:43:05 ubnt zebra[762]: interface ppp0 index 19 <POINTOPOINT,NOARP,MULTICAST> added.
Feb 28 18:43:05 ubnt zebra[762]: interface ppp0 mtu changed from 1500 to 1492
Feb 28 18:43:05 ubnt pppd[4884]: PAP authentication succeeded
Feb 28 18:43:05 ubnt pppd[4884]: peer from calling number 88:A2:5E:1E:29:8C authorized
Feb 28 18:43:05 ubnt zebra[762]: warning: PtP interface ppp0 with addr X.X.X.X/32 needs a peer address
Feb 28 18:43:05 ubnt zebra[762]: interface index 19 was renamed from ppp0 to pppoe2
Feb 28 18:43:06 ubnt zebra[762]: interface pppoe2 index 19 changed <UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>.
Feb 28 18:43:06 ubnt pppd[4884]: local IP address X.X.X.X
Feb 28 18:43:06 ubnt pppd[4884]: remote IP address X.X.X.X
Feb 28 18:43:06 ubnt ubnt-service-igmpproxy: starting the IGMP proxy service (see messages from igmpproxy).
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] ▒[ service radius-server ]
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Stopping FreeRADIUS daemon: freeradius.
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Starting FreeRADIUS daemon: freeradius.
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] ▒1
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Unit number must be unique.
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] ▒[ service gui ]
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Starting the GUI service.
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] ▒1
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] ▒[ service dhcp-server ]
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Stopping DHCP server daemon...
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Starting DHCP server daemon...
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] ▒1
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Commit failed
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [delete] failure: 0 success: 1
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [set] failure: 0 success: 1
Feb 28 18:43:08 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit] failure: 1 success: 1
Feb 28 18:43:08 ubnt mcad: mcad[3743]: ace_reporter.reporter_handle_response(): edgemax apply config failed (error code: 4)
Feb 28 18:43:08 ubnt mcad: mcad[3743]: ace_reporter.reporter_handle_response(): commit errors, {"COMMIT": {"error": "▒[ service radius-server ]\nStopping FreeRADIUS daemon: freeradius.\nStarting FreeRADIUS daemon: freeradius.\n\n▒1\nUnit number must be unique.\n\n▒[ service gui ]\nStarting the GUI service.\n\n▒1\n▒[ service dhcp-server ]\nStopping DHCP server daemon...\nStarting DHCP server daemon...\n\n▒1\nCommit failed\n", "failure": "1", "success": "1"}, "DELETE": {"failure": "0", "success": "1"}, "SESSION_ID": "ddf6dd4d3bd5d8b93585acc0ec", "SET": {"failure": "0", "success": "1"}}#012
Feb 28 18:43:34 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Unit number must be unique.
Feb 28 18:43:34 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Commit failed
Feb 28 18:43:34 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [delete] failure: 0 success: 1
Feb 28 18:43:34 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [set] failure: 0 success: 1
Feb 28 18:43:34 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit] failure: 1 success: 1
Feb 28 18:43:34 ubnt mcad: mcad[3743]: ace_reporter.reporter_handle_response(): edgemax apply config failed (error code: 4)
Feb 28 18:43:34 ubnt mcad: mcad[3743]: ace_reporter.reporter_handle_response(): commit errors, {"COMMIT": {"error": "Unit number must be unique.\n\nCommit failed\n", "failure": "1", "success": "1"}, "DELETE": {"failure": "0", "success": "1"}, "SESSION_ID": "ddf6dd4d3bd5d8b93585acc0ec", "SET": {"failure": "0", "success": "1"}}#012
Feb 28 18:43:34 ubnt ddclient[3560]: SUCCESS: updating vg4vvgn0uopl8njahkt8.drachennest.nl: good: IP address set to 91.13.236.5
Feb 28 18:44:00 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Unit number must be unique.
Feb 28 18:44:00 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit error] Commit failed
Feb 28 18:44:00 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [delete] failure: 0 success: 1
Feb 28 18:44:00 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [set] failure: 0 success: 1
Feb 28 18:44:00 ubnt mcad: mcad[3743]: mca-edgemax._edgemax_parse_set_commit_save_results(): [commit] failure: 1 success: 1
Feb 28 18:44:00 ubnt mcad: mcad[3743]: ace_reporter.reporter_handle_response(): edgemax apply config failed (error code: 4)
Feb 28 18:44:00 ubnt mcad: mcad[3743]: ace_reporter.reporter_handle_response(): commit errors, {"COMMIT": {"error": "Unit number must be unique.\n\nCommit failed\n", "failure": "1", "success": "1"}, "DELETE": {"failure": "0", "success": "1"}, "SESSION_ID": "ddf6dd4d3bd5d8b93585acc0ec", "SET": {"failure": "0", "success": "1"}}#012
[...]
Alles anzeigen
Zu meinem Netzwerk :
Das USG 4Pro ist auch auf dem neuesten Stand der Firmware.
Daten zum Controler : UCK G2 Plus v3.0.17 (Netwerk 7.3.83.0 / atag_7.3.83_19645)
Vor dem USG ist ein Xyzel Modem das über VDSL zur Telekom geht.
Das VLAN 7 ist im WAN beim USG hinterlegt.
Ich nutze auch eine Delegation von IPv6 im Netzwerk mit.
Im Netzwerk selber habe ich 4 Netzwerke :
Nach dem USG kommt ein USW-24-PoE der alles zentral verteilt.
Es gibt mehrere UAP's und auch noch kleinere Switche die im ganzen Gebäude verteilt sind.
Falls ihr noch weite Infos braucht, sagt gerne bescheid.
Ich würde mich über Hilfe freuen.
Gruß William