Für nen Pro 7 Wall mit SFP+ müsste da Enterprise mit dabei stehen😉
Denke daher wird nur ein Pro 7 mit 2,5er Port und 4 1Gb Ports sein.
Finde beim jetzigen 7er ist das Pro etwas zu hoch gegriffen 😉
Beiträge von BlackSpy
-
-
Die Telekom sitzt auf genug IPV4 Adressen 😉
-
Schick jetzt kann man auch im Mixed Mode WPA2/3 das 6GHz mit einschalten.
-
Wow.....so richtig gesetzlich verankert?
-
Ein Ostergeschenk für hoppel118 😉
UniFi Access Point 7.0.49
https://community.ui.com/releases/UniFi-Access-Point-7-0-49/8fe7fe75-37b9-494e-9d50-0fd1247c6565
Overview
UniFi Access Point 7.0.49 is only available for Gen7 Access Points.
This update enhances VLAN client throughput for both static and RADIUS-assigned VLANs. We'd appreciate your feedback on VLAN throughput tests to see the impact on your setup. If you don't notice an improvement, please send us a support file and throughput results for a non-VLAN SSID on the same AP. Thanks for your patience!
Improvements
- Improved VLAN throughput.
- Improved 2.4GHz latency and connection stability.
- Improved interoperability with IoT devices.
- Improved 6GHz range.
- Improved WPA2/WPA3 roaming for WPA3 clients.
- Reduced excessive logging.
Bugfixes
- Fixed SSIDs stop broadcasting after a few hours of uptime in rare cases.
- Fixed repetitive logging (`append: not found`, `Scan table size`) in some cases.
- Fixed false positive Rogue AP alerts when multiple APs are broadcasting at 6GHz.
- Fixed manually set 6GHz channel occasionally changing automatically.
- Fixed Auto channel not scanning for the cleanest channel when channel width is changed.
- Fixed maximum supported bandwidth not being reported correctly for 320MHz capable clients.
- Fixed kernel crashes to improve overall stability.
Additional information
- Refer to the Help Center article here to determine the UniFi Access Point generation.
- Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
- If you wish to go back to the Official release after the upgrade, change the release channel back to Official.
If you encounter any issues with this release, please provide us with some details on your setup and include the below information:
- AP model(s)
- Previous AP release version
- UniFi Network application version
Download links
-
Habe ich auch gelesen.
Ja die Proxmox wissen das es jetzt ihre Zeit ist und ehrlich gesagt finde die Kombi mit ihrem Backup Server sehr gut und für kleine Firmen preislich sehr interessant.
Habe erst letztes Jahr für die Firma VSphere Essential gekauft, sollte der Server abkacken Wechsel ich zu Proxmox
-
Für Gerüchte und Spekulationen zu OS4 , bitte hier weiter:
-
In der neuen Beta Network App gab es eine Hinweis auf Unifi OS 4.
Nach suchen im Unifi Forum wurde dies auch bestätigt, nur keine Aussage wann sie kommt und was neu wird.
Was würdet ihr euch wünschen?
-
Normal nicht, wäre bei Unifi aber nix neues "Titel" zu ändern.
Bin aber auch der Meinung das ein OS 4 vor der Tür steht.
-
UniFi Network Application 8.1.122
Improvements
- Added option to toggle ping DHCP conflict checking in network settings (Requires UniFi (Cloud) Gateway 4.0.1 or newer). <------ ???????
- Added Tunnel IP and Remote Subnets Dynamic options to IPsec Site-to-Site VPNs.
- Added more descriptions to predefined rules.
- Added validation for IPv6 default static routes.
- Improved application startup resiliency.
- Improved user experience when changing WiFi Encryption settings.
- Improved Device image loading
- Improved user experience when configuring Traffic Rule directions.
- Improved the user experience for configuring UBB and UBB-XG devices.
- Improved IPsec Tunnel IP validation.
- Improved U-LTE device registration.
- Force auto Prefix Delegation ID for Cloud Gateways.
- Disable Network Isolation (ACL) if there are no ACL rules.
Bugfixes
- Fixed an issue where the ISP name was not updated after disabling a WAN port.
- Fixed an issue where speed test results were showing undefined speeds in rare cases.
- Fixed Fallback toggle for Traffic Routes working as kill switch, it will now behave properly.
- Fixed misplaced description labels on the Topology page with Safari browsers.
- Fixed the inability to edit firewall rules after re-ordering them.
- Fixed an issue where the Voucher Printing option is not opening.
- Fixed an issue where Speed Limit data was lost when pausing/resuming Traffic Rules.
- Fixed rare gateway configuration errrors.
- Prevent selecting L3 Switch networks for OSPF.
Additional information
- Create a backup before upgrading your UniFi Network Application in the event any issues are encountered.
- See the UniFi Network Server Help Center article for more information on self-hosting a server.
- UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
- Version 7.5 till 8.0 supports up to MongoDB 4.4.
- Version 8.1 and newer supports up to MongoDB 7.0.
- UniFi Network Application updates may cause your adopted devices to be re-provisioned.
- Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu
UniFi Network Application for UniFi OS
UniFi Network Native Application for UniFi OS
UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***
-
UniFi Protect Cameras 4.70.39
https://community.ui.com/releases/UniFi-Protect-Cameras-4-70-39/33324fb5-4610-471e-be4e-2a89a991dbb7
Improvements
- Improved license plate recognition.
Bugfixes
- Fixed an issue where the camera might reboot when the user starts using talkback via the mobile apps.
-
UniFi Protect Application 3.0.26
Improvements
- Improved application resiliency.
Additional information
This version requires you to have UniFi OS version 3.0 or newer.
-
UniFi Access Reader Pro 2.8.19
Improvements
- The screen now displays the reader's name.
Bugfixes
- Fixed the issue where the screen occasionally went black, though NFC card scanning remains unaffected.
- Fixed the issue where sometimes a doorbell call continued ringing even after the call was canceled.
- Fixed the issue where door detection sometimes failed, causing door unlock failure using the UniFi Identity mobile app.
- Fixed the issue where UA Pro occasionally could not be updated despite being restarted.
-
UniFi Access Reader G2 Pro 1.4.8
Improvements
- Added support for holding the doorbell icon to initiate a call. Switch to this mode in Access application > Devices > Readers > select a G2 Pro > Settings > Display > Doorbell Trigger. Requires Access application 1.23.12 or above.
- Optimized the welcome flashlight’s performance.
- The screen now displays the reader’s name.
Bugfixes
- Fixed the issue where the reader occasionally could not identify NFC cards.
- Fixed the issue where the screen occasionally went black, though NFC card scanning remains unaffected.
- Fixed the issue where G2 Pro occasionally could not be updated despite being restarted.
-
Die Firmware ist die 3.2.12 und aktuell. Das Problem mit dem volllaufenden Speicher sollte es nicht sein.
-
Habe ich auch noch nicht durchgeblickt ....naja am ende nur 5$, habe damit 594€ gespart
-
Welche Firmware Version? könntest noch die alte haben mit dem überlaufenden Speicher.
-
UniFi Access Application 1.24.6
Improvements
- [UA G2 Pro] Added support for pairing UA G2 Pro to Intercom Viewer. Doorbell notifications are sent to all paired Viewers when someone makes a call on G2 Reader Pro.
- [EAH-8] Optimized policy distribution efficiency. *
- Added support for site-level emergency mode activation. When UA Hub Door, EAH-8, or UA Elevator Hub receives a fire signal from its connected fire panel, all locations at this site will enter the emergency mode. **
- A video is captured by an Access Reader when someone: ***
- Unlocks a door through UA Lite or a physical device connected to Access Hub.
- Triggers a third-party chime connected to Access Hub.
- Unlocks a door remotely.
- Added Open API support for:
- Custom unlock duration.
- Obtain door unlock recordings from system logs
- Manage emergency mode.
- Send UniFi Identity invitation email to users.
- Optimized the loading efficiency when switching between tabs.
- UA devices’ support files are now included as part of UniFi OS support files.
Bugfixes
- Fixed the issue where the mic was disabled by default when a doorbell call was made.
- Fixed issues with unlock schedules.
- Fixed issues with discovering Access Readers.
- Fixed the icon color mismatch of G2 Reader on the user interface.
- Fixed the issue where the Network option was unexpectedly displayed when running on UNVR and UNVR Pro. Note: Currently, we only support setting Access devices’ networks on UDM Pro, UDM SE, and UDW.
- [Identity Enterprise] Fixed the issue where editing door names on EAH-8’s Port and Terminals Manager page did not take effect.
Additional information
* Requires EAH-8 5.4.3.0 or later.
** To enable site-level emergency mode: Go to Devices > Location Hubs > select a Hub > Settings > Emergency Mode and enable Activate Site Lockdown/Evacuation When Triggered.
*** Requires upcoming releases: G2 Pro 1.4.6 or later, UA Pro 2.8.16 or later, UA Intercom 1.2.3 or later.
-
Mal Kabel getauscht? Und in den Windows Energie Einstellungen unter erweitert die Sparfunktion des Ethernet Port abschalten.
-
Finde es aber auch seltsam das sie sagen wer die 5$ gezahlt hat bekommt das Vorrecht zum Vergünstigten Kauf, nun kann aber jeder auf der Kickstartseite kaufen ???
Ich verfolge es weiter, finde die Hardware interessant und es wurde seitens UGreen geschrieben das es andere Rabatt Aktionen geben wird.
Auch muss man sehen wie sich das OS entwickelt (jetzt haben die ca 2-3 Monate Zeit), wird es nicht gut fallen die Preise so oder so.
Aber man muss zugeben gute PR Abteilung
