Läuft bei mir auch, ohne Probleme
Beta USW 6.x.x
Es gibt 57 Antworten in diesem Thema, welches 21.912 mal aufgerufen wurde. Der letzte Beitrag () ist von Naichbindas.
-
-
UniFi Switch 6.5.48
https://community.ui.com/releases/UniFi-Switch-6-5-48/a0f47856-be01-4344-a605-6904018b9023
Improvements
- Improved CPU usage when the Screen is in the idle state.
- Improved SFP speed auto-detection stability at 1Gbps.
- Improved speed for updating the console IP on the LCM.
- Increased the Fixed IP limit to 512 for L3 networks. The limit was 64 on previous versions.
- [USC-8] Improved the accuracy of topology connections.
- [USW-Enterprise-8-PoE] Improved fan control algorithm when using an RJ45 SFP Module.
- [USW-EnterpriseXG-24] Improved process monitoring algorithm to avoid device offline issue.
- [USP-PDU-Pro] Improved the stability of AC power reading.
- [USP-PDU-Pro] Added outlet power overload protection when the power usage has reached the power budget limit.
Bugfixes
- Fixed speed detection when changing peer cable to another SFP port.
- [USW-Flex-XG] Fixed egress rate limiting.
- [USW-Enterprise-8-PoE] Fixed 802.1x authentication success client gets the IP from fallback VLAN.
- [USW-Enterprise-48-PoE] Fixed incorrect PoE reading after power cycle in a rare chance.
- [USW-PoE] Fixed 802.1x authentication failed client cannot get IP from fallback VLAN.
- [USW-PoE] Fixed PTP/SSDP forwarding issue when IGMP snooping enabled.
- [USW-48-PoE] Fixed MDNS packet doesn't forward after disabling IGMP snooping.
- [USW-Pro] Fixed missing port state logging.
- [USP-PDU-Pro] Fixed wrong outlet voltage value when turning off the outlet power.
Additional information
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
- Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
- If you wish to go back to the Official release after the upgrade, change the release channel back to Official.
If you encounter any issues with this release, please provide us some details on your setup and include the below information:
- Switch model(s)
- Previous Switch release version
- UniFi Network application version
Download links
US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum
US-L2-POE | md5sum | sha256sum
US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum
USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum
USW-Aggregation | md5sum | sha256sum
USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum
USW-Flex/USP-RPS | md5sum | sha256sum
USP-RPS-Pro | md5sum | sha256sum
USP-PDU-Pro | md5sum | sha256sum
USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum
USW-Multi | md5sum | sha256sum
-
Installiert, danke dir
-
UniFi Switch 6.5.59
https://community.ui.com/releases/UniFi-Switch-6-5-59/4884a5c7-2f7f-4538-80d9-9bb26c512ac0
Improvements
- Improved RPS port heartbeat response checking.
- Redesigned touchscreen update screen.
- [USW-Enterprise-8-PoE] Improved SFP module compatibility.
Bugfixes
- Fixed system LED changes do not apply, introduced in version 6.5.48.
- [USC-8] Fixed SNMP interface statistics do not work.
- [USP-PDU-Pro] Fixed unable to disable outlet 20, introduced in version 6.5.48.
Additional information
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
- Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
- If you wish to go back to the Official release after the upgrade, change the release channel back to Official.
If you encounter any issues with this release, please provide us some details on your setup and include the below information:
- Switch model(s)
- Previous Switch release version
- UniFi Network application version
Download links
US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum
US-L2-POE | md5sum | sha256sum
US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum
USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum
USW-Aggregation | md5sum | sha256sum
USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum
USW-Flex/USP-RPS | md5sum | sha256sum
USP-RPS-Pro | md5sum | sha256sum
USP-PDU-Pro | md5sum | sha256sum
USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum
USW-Multi | md5sum | sha256sum
-
Läuft. Alle Switches back on track
-
-
lange her
UniFi Switch 6.6.34
https://community.ui.com/releases/UniFi-Switch-6-6-34/2551bdb3-ca0d-4278-a106-3f151f03faba
Improvements
- Improved touchscreen throughput accuracy.
- Updated the AR pattern on the touchscreen.
- Eliminated client connectivity downtime when configuring NTP.
- Removed unnecessary dec_payload() error messages in syslog.
- Removed Voltage, Current, Temperature, and Power from SFP module info if they are not supported.
- [USW-Enterprise-24/48-PoE] Improved the throughput with U6-LR.
- [USW-Pro] Improved DHCP latency when DHCP snooping is enabled without DHCP Guarding.
- [USW-PoE] Removed misleading STP syslog alerts if STP is disabled.
Bugfixes
- [USW-Aggregation] Fixed LCM is upgrading and getting to black a few times during the adoption.
- [USW-Aggregation] Fixed link issue when the port speed was changed on a UDM-Pro or UDM-SE.
- [USW-Enterprise-8-PoE] Fixed RSTP path cost for 2.5G port speed.
- [USW-Flex] Fixed SNMP reports different uptime.
- [USW-Flex] Fixed incorrect uplink port after modifying the port profile or management network.
- [USW-PoE] Fixed authenticated client cannot get a DHCP IP when it connects to an 802.1x multi-host port.
Additional information
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
- Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
- If you wish to go back to the Official release after the upgrade, change the release channel back to Official.
If you encounter any issues with this release, please provide us some details on your setup and include the below information:
- Switch model(s)
- Previous Switch release version
- UniFi Network application version
Download links
US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum
US-L2-POE | md5sum | sha256sum
US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum
USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum
USW-Aggregation | md5sum | sha256sum
USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum
USW-Flex/USP-RPS | md5sum | sha256sum
USP-RPS-Pro | md5sum | sha256sum
USP-PDU-Pro | md5sum | sha256sum
USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum
USW-Multi | md5sum | sha256sum
-
UniFi Switch 6.6.44
https://community.ui.com/releases/UniFi-Switch-6-6-44/a68848e5-34b1-4da6-a352-e0bccb4f4094
Improvements
- [USW-Aggregation] Improve link speed auto detect mechanism.
- [USW-Flex-XG] Disabled 802.3az Energy-Efficient Ethernet (EEE).
Bugfixes
- [USW-Pro-8-PoE] Fixed DHCP request log spam on the management interface.
- [USW-Enterprise-48-PoE] Fixed an issue where the device might lose it's Static IP address.
- [USW-PoE] Fixed random device reboots, introduced in 6.6.34
- [USW-PoE] Fixed SNMP issues, introduced in 6.6.34
Additional information
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
- Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
- If you wish to go back to the Official release after the upgrade, change the release channel back to Official.
If you encounter any issues with this release, please provide us some details on your setup and include the below information:
- Switch model(s)
- Previous Switch release version
- UniFi Network application version
Download links
US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum
US-L2-POE | md5sum | sha256sum
US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum
USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum
USW-Aggregation | md5sum | sha256sum
USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum
USW-Pro-8-PoE | md5sum | sha256sum
USW-Flex/USP-RPS | md5sum | sha256sum
USP-RPS-Pro | md5sum | sha256sum
USP-PDU-Pro | md5sum | sha256sum
USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum
USW-Multi | md5sum | sha256sum
-
UniFi Switch 6.6.53
https://community.ui.com/releases/UniFi-Switch-6-6-53/f5d480e8-d116-4c46-88e0-9273014da66c
Bugfixes
- [USW-Pro-Aggregation] Fixed an issue where the device could lockup when IGMP snooping is enabled.
- [USW-Pro-8-PoE] Fixed an issue where L3 clients couldn't access the network if IGMP snooping is enabled.
- [USW-PoE] Fixed unexpected memory increase in rare conditions.
- [USW-PoE] Fixed SNMP issues with Zabbix servers.
Additional information
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
- Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
- If you wish to go back to the Official release after the upgrade, change the release channel back to Official.
If you encounter any issues with this release, please provide us some details on your setup and include the below information:
- Switch model(s)
- Previous Switch release version
- UniFi Network application version
Download links
US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum
US-L2-POE | md5sum | sha256sum
US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum
USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum
USW-Aggregation | md5sum | sha256sum
USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum
USW-Pro-8-PoE | md5sum | sha256sum
USW-Flex/USP-RPS | md5sum | sha256sum
USP-RPS-Pro | md5sum | sha256sum
USP-PDU-Pro | md5sum | sha256sum
USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum
USW-Multi | md5sum | sha256sum
-
Hallo zusammen,
kurze Frage, kann ich bei den Geräte Firmwares in der aktuellen Version der DreamMachine nicht mehr einstellen, dass RC firmwares installiert werden?
Für die Console und Anwendungen habe ich es eingestellt, aber bei den Geräte Firmwares gibt es nur den Haken für die EA-Firmwares?
Besten Dank vorab
-
Doch, bei System in der Network App kannst das einstellen
-
Hallo zusammen,
kurze Frage, kann ich bei den Geräte Firmwares in der aktuellen Version der DreamMachine nicht mehr einstellen, dass RC firmwares installiert werden?
Für die Console und Anwendungen habe ich es eingestellt, aber bei den Geräte Firmwares gibt es nur den Haken für die EA-Firmwares?
Besten Dank vorab
Dein Gateway -> Settings -> System -> Updates -> Device Firmware Release Channel
-
Achtung dumme Frage
Ist denn die Version 6.6.X immer Beta Status?
Laut Homepage ist das die aktuelle:
https://ui.com/download/releases/firmware (für die U6-Pro die 6.5.62)
Laut der Liste, ist aber 6.6.36 Offiziell:
https://community.ui.com/releases/UniFi-Access-Point-6-6-36/04ec19c4-25f0-4391-8f27-6d9666496a8c
Auf meinem Unifi Network Controller gibt es aber nur die 6.5.62 für die U6 Pro. Was ist denn nun die Aktuelle?
-
Die letzte offizielle für meine Pro (nicht 6Pro) ist die 6.5.62.
Daher sollte 6.6 noch komplett im Beta sein.
-
Die 6.6.36 war nur für
ZitatOverview
UniFi Access Point 6.6.36 adds 6GHz support to several new countries that have adopted the WiFi6E standard. It's only available for Gen6 Access Points.
This release has been promoted to Stable/Official for the models listed below, it's still a Release Candidate for the others.
- U6-Mesh
- U6-IW
- U6-Enterprise-IW
-
-
UniFi Switch 6.6.61
https://community.ui.com/releases/UniFi-Switch-6-6-61/b377def5-454c-48a6-9ed8-74dd10022920
Improvements
- [USW-Pro-Aggregation] Improved 25G link stability.
Bugfixes
- [USW-Enterprise-8-PoE] Fixed L3 DHCP server doesn't work when DHCP Snooping is enabled.
- [USW-Industrial] Fixed flow control not getting enabled despite enabling it.
Additional information
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
- Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
- If you wish to go back to the Official release after the upgrade, change the release channel back to Official.
If you encounter any issues with this release, please provide us some details on your setup and include the below information:
- Switch model(s)
- Previous Switch release version
- UniFi Network application version
Download links
US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum
US-L2-POE | md5sum | sha256sum
US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum
USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum
USW-Aggregation | md5sum | sha256sum
USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum
USW-Pro-8-PoE | md5sum | sha256sum
USW-Flex/USP-RPS | md5sum | sha256sum
USP-RPS-Pro | md5sum | sha256sum
USP-PDU-Pro/USP-PDU-HD | md5sum | sha256sum
USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum
USW-Multi | md5sum | sha256sum
-
Hallo
Mir ist aufgefallen as bei diesem Update und dem davor die Updates installiert werden,
die Geräte starten dann neu und die LED´s leuchten alle wieder aber der US-48-500W wird trotzdem in der Umgebung als offline angezeigt.
Neustarts bringen da rein garnix.
Da hilft dann nur einmal vom Strom nehmen und dann geht es wieder.
irgendwas scheint da dann nicht richtig zu funktionieren.
mfg