Beta UniFi Network Application 7.5.x

Es gibt 83 Antworten in diesem Thema, welches 22.167 mal aufgerufen wurde. Der letzte Beitrag () ist von phino.

  • UniFi Network Application 7.5.165

    https://community.ui.com/releases/UniFi-Network-Application-7-5-165/9b957451-acc0-4a80-92e7-affdf00612bb



    Overview

    • Added ISP/Modem in the Topology.
    • Added Switch-related System Logs in its Property Panel.
    • Added Ping test option for Clients.
    • Added support for adjustable column width for Devices and Client tables.
    • Added support for DNS Shield. This requires your UniFi Gateway (Consoles) to run on firmware version 3.2 or newer.
    • Added support for IPv4 over IPv6 in Japan using DS-LITE. This requires your UniFi Gateway (Consoles) to run on firmware version 3.2 or newer.
    • Added support for FQDN/Hostnames with IPsec Site-to-Site VPNs (Requires UniFi Gateway (Console) 3.2 or newer).
    • Improved setup flow for Windows/macOS.
    • Improved Dashboard UX.
    • Improved Global WiFi Settings UX.
    • Improved Traffic Monitor UX.
    • Added time estimate when filtering by clients
    • Improved filtering and navigation
    • Reorganize Firewall and Routing Settings.


    Improvements

    • Added messaging for missing Windows Firewall rules needed for Device adoption and communication.
    • Added confirmation when trying to set Primary/Secondary WAN to ports that are not connected to the Internet.
    • Added IPv6 addresses for client devices. This requires your UniFi Gateway (Consoles) to run on firmware version 3.2 or newer.
    • Added DFS Scanning status for Access Points.
    • Added AP Density widget to the WiFi Coverage page.
    • Added 6GHz clients to the Topology.
    • Added the Last Seen and Connection type filter on the top bar on the Clients page.
    • Added messaging for regions where 6GHz is not (yet) supported.
    • Added global IPv6 support in the Network Settings. This requires you to have IPv6 enabled on WAN.
    • Added validation for unreachable custom Echo/Internet Verification Servers.
    • Added Client Session Time widget to the Client property panel.
    • Added support for adding a /32 and /31 to Remote Gateway/Subnets for VPNs. This requires an UniFi (Next-Gen) Gateway Console.
    • Added support for opening side panels while staying on the same page. E.g., opening a Client property panel while being on the Dashboard.
    • Added validation for checking Honeypot IPs against Fixed IPs from Clients.
    • Added Guest authorization by admins in the System Logs.
    • Added the "Manage" option to the Profiles settings.
    • Added support for running a speed test on WAN2.
    • Added additional ESP DH Group Options for Site-to-Site VPNs.
    • Added support for re-adopting Wireless Meshed APs that are factory reset via the Reset button.
    • Added affected clients to the IP Conflict notification.
    • Added the ability to reset the sorting preferences by clicking Restore Defaults on the Devices page.
    • Added Device Type filtering to the Device page.
    • Automatically enable Wireless Meshing when doing a Wireless Adoption.
    • Automatically restore from recovery backup after replacing the HDD on a UCK G2 Plus.
    • Improved UniFi Devices table columns.
    • Improved Device connection state when adopting Mesh APs after enabling Wireless Meshing.
    • Improved STP Discarding UX in the Port Manager.
    • Improved feedback for the OpenVPN Configuration File download button.
    • Improved auto-backup schedule limits on UniFi Consoles.
    • Improved Data Retention options on UniFi Consoles.
    • Improved Site-to-Site VPN configuration.
    • Improved Voucher creation process.
    • Improved Broadcasting AP column in the WiFi Settings.
    • Improved searching in Settings.
    • Improved Settings section organization.
    • Improved AP Group Selection in the WiFi Settings.
    • Improved IPv6 Network Settings UX.
    • Improved Firewall Rules table UX.
    • Improved displaying OpenVPN Server Clients on the Clients page.
    • Improved the VPN Creation process by prefilling the name and port.
    • Improved Wireless Uplink reporting in the Topology.
    • Improved application loading time.
    • Improved Device update resiliency by using cached firmware to update a device if the device fails to download the firmware from our servers.
    • Updated the packet loss display in the Dashboard Internet Health graph.
    • Updated the UniFi Network Device display names.
    • Renamed WiFi QoS to WiFi Speed Limit.
    • Display the current Connection session in the Clients and Topology pages. This works only for local connections and on unifi.ui.com (Google Chrome only).
    • Display email addresses for guests authorized via Facebook authentication.
    • Prevent enabling Device Isolation on networks with managed UniFi Devices.
    • Prevent offering IP addresses to clients that are configured via a Static IP on UniFi Devices.
    • Moved AP Site Settings and Support to Advanced Settings.
    • Moved Port Manager to the Overview tab for Switches.
    • Bundle Java inside the Application on Windows Network Application Servers.
    • Deprecate Facebook-WiFi authorization. Facebook is dropping support for it.
    • Enable auto-update for Meshed APs. Previously they would not auto-update.
    • Require MongoDB 3.6 or newer. This also drops support for 32-bit systems.
    • Require Java 17.


    Bugfixes

    • Fixed unable to download backups from a Network Application Server via Remote Access.
    • Fixed unable to configure switch ports if one of the ports had references to a removed L3 Network.
    • Fixed missing Ad Block statistics on the Filtering Activity page.
    • Fixed UDM-Pro/UDM-SE would appear offline when Port 11 has Block All option configured in the Restrict Traffic Settings.
    • Fixed unable to download backup files from Network Application servers when connected via unifi.ui.com.
    • Fixed UID VPN users are unable to reach the Remote subnet over VPN in rare cases.
    • Fixed Device discovery when port 1 is disabled on an UniFi Gateway Console.
    • Fixed missing + and - buttons on the Traffic map when opening the Application locally.
    • Fixed unable to change WAN from Static to DHCP when having a VPN configured.
    • Fixed voucher printing via Safari browsers.
    • Fixed false positive "Multiple IP Notifications" for UniFi Devices with multiple interfaces.


    Additional information

    (Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.

    • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:


    UniFi Network Application updates may cause your adopted devices to be re-provision.The UC-CK is not supported as of Network application version 7.3 and newer.


    Native Application for UniFi OS specific This is only compatible with the UDM/UDR that run UniFi OS 3.1.6 or newer, don't attempt to install it on any other consoles. Older UniFi OS versions on the UDM/UDR use the regular UniFi OS Network application.


    Microsoft Windows specific (when running it as a service) Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.


    Debian/Ubuntu/Linux specific For Debian/Ubuntu users installing via our repo, please update your APT source (see HERE).We support MongoDB 3.6 since 5.13.10, older UniFi Network Application versions only support up to MongoDB 3.4.The UniFi Network application requires Java 17 to be installed on the system that runs the application. Java 18 and later are not supported.


    Checksums

    Code
    <strong>f649b045fd5951d9fbe21174d20eacfd *UniFi-installer.exe
    898af31b36d4c8d81981a4c8b4c0626a *UniFi-Network-Server.dmg
    0cc1b7e01dea4499d7b3d279506ca5d5 *UniFi.unix.zip
    29d69cda64c596dca0613191ad2e2ffb *unifi_sysvinit_all.deb
    2a6cfc41c0f131d545b0954c04814456 *unifi-uos_sysvinit.deb
    392a14291890d0f82d968e1738845a6c *unifi-native_sysvinit.deb
    601df32736f41e40a80a3e472450a3e1 *unifi_sh_api
    
    </strong>


    Download links

    UniFi Network Application for Windows

    UniFi Network Application for macOS

    UniFi Network Application for Debian/Ubuntu

    UniFi Network Application for UniFi OS

    UniFi Network Native Application for UniFi OS

    UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***

    unifi_sh_api (shell library)


  • DAS finde ich schön:


    Das Schneestürme in der Topologie:


    Süß aber alles so unübersichtlich funktioniert auch nur wenn Clients Aktiviert sind.

    Sprich wenn die ausgeblendet sind tut sich nichts.. schlimmer noch

    Unifi Eigne Cams versuchen bei mit keinen trafic... sind es wohnlich wert :smiling_face:



    Und die Änderungen an der UI.. na ja gewöhnt man sich ich dran das wieder 1 zwei Sachen

    woanders sind :winking_face:


    nachtrag:


    Meine Ausnahmen für die IDS Umgehung waren Weg nach demUpdate...

    Hat hier grade wieder geklingelt weil DummDödel Arbeits Windows da immer mal was raushaut

    (Teams oder Onedrice sync)

  • also ich habe weder schneeflocken, noch einen provider in der topology


    Controller auf LXC Container Debian

    1und1 echtes DualStack

    DGA4132 Bridged

    UXG Pro macht die Einwahl über PPPoE



    Aber wenn die jetzt an DS-Lite für Japan arbeiten haben wir vielleicht auch bald in DE das vergnügen...

    Das war eine meiner größten sorgen das Unifi sich da nicht drum kümmert... aber der Anafng ist gemacht.

    Gruß

    defcon

  • So habe mich mal bei UI.com mit drangehangen... scheinen ja auch etliche zu sein die

    ihren Wan Anschluss nicht sehen...


    was hast du dahinter ? (bei mir Vergor Modem, UDM macht PPOE und VLAN Tagging)

    WAN 1 Glasfaser von DNS:NET per PPPoE über ein GF-SFP-Modul.

    WAN 2 Mobilfunk O2 per ZTE Router* im Bridge-Modus, bekomme per DHCP eine private IP (10.x.x.x). Hier steckt eine 60 GB Jahreskarte drin.


    *ZTE MC801A HyperBox 5G WLAN Router

  • ....

    • Added support for DNS Shield. This requires your UniFi Gateway (Consoles) to run on firmware version 3.2 or newer.

    .....

    Wo wird diese schon eingesetzt, die 3.2?

  • Möglich das diese oder nächste Woche erscheint. Die 3.1 ist jetzt für alle Final, wenn dort keine EA/Beta mehr nachkommt erscheint die 3.2

  • UniFi Network Application 7.5.169

    https://community.ui.com/releases/UniFi-Network-Application-7-5-169/1778c52a-fb5e-4f9e-b029-74abd29efef5


    Improvements

    • Added IPv6 DNS servers in the Internet Settings. This requires a UniFi Gateway (Consoles).
    • Added IPv6 stateless option in the Internet Settings. This requires your UniFi Gateway (Consoles) to run on firmware version 3.2 or newer.
    • Added Radio Antenna selection for UWB-XG.
    • Improved adding/editing administrators on Network Application servers.
    • Improved displaying of link speeds in device property panels.
    • Use channel 4 as default during adoption for UBB/UBB-XG.
    • Changed Rx/Tx error threshold for System Logs.
    • Moved the Signal column next to the Experience column on the Clients page.
    • Removed incorrectly generated Outside of Range messages in System Logs.
    • Removed scheduled Nightly Channel Optimization tasks, you can still optimize manually.
    • Removed pre-configuration messaging from RADIUS profiles.
    • Removed fallback IP address messaging if the site does not have a UniFi Gateway.

    Bugfixes

    • Fixed incorrect ISP Potential value after speed tests.
    • Fixed unrealistic throughput on switches and setups with USGs.
    • Fixed discrepancy between latency reported in the ISP Health bar and ISP Status.
    • Fixed APs might show up under "unmanaged" while they are ready for adoption after being removed.
    • Fixed UID IoT clients appearing offline.
    • Fixed some DPI stats were not cleared when the client is removed from the database.
    • Fixed Network Application startup failure when a custom socket timeout is applied.
    • Fixed some configuration options were not being applied to APs for Open WiFi networks.
    • Fixed channel optimization overriding manual channel configurations in rare cases.
    • Fixed IP Address column sorting on the clients page.
    • Fixed Connection column sorting on the clients page.
    • Fixed unable to save RADIUS profile under global switch settings.
    • Fixed an issue where disabled APs didn't appear properly.
    • Fixed AP dropdown in the Dashboard.
    • Fixed missing UXG data in the Dashboard on Network Application servers.
    • Fixed missing columns on the Clients page.
    • Fixed missing ISP Logo on the Topology page.
    • Fixed unable to create IPsec Site-to-Site VPN if the setup has a USG.
    • Fixed unable to Save/Apply Changes in the firewall section in rare cases.
    • Temporarily disable the detection of missing Windows Firewall rules.

    Additional information

    (Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.

    • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:


    UniFi Network Application updates may cause your adopted devices to be re-provision.The UC-CK is not supported as of Network application version 7.3 and newer.

    Download links

    UniFi Network Application for Windows

    UniFi Network Application for macOS

    UniFi Network Application for Debian/Ubuntu

    UniFi Network Application for UniFi OS

    UniFi Network Native Application for UniFi OS

    UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***

    unifi_sh_api (shell library)


  • UniFi Network Application 7.5.171

    https://community.ui.com/releases/UniFi-Network-Application-7-5-171/e2a2987e-6bf5-485b-9508-33e89d080393


    Improvements

    • Improved error messaging in Port Manager.
    • Improved Traffic Rule validation when selecting to many counties. Max 150 countries/regions are supported.
    • Aggregate Honeypot hit and Device Reconnected notifications.
    • Always allow disabling Fied IP adresses for clients.

    Bugfixes

    • Fixed connection column sorting in the Clients page.
    • Fixed various gateway configuration issues.
    • Fixed L3 switches were not provisioning after editing L3 Static Routes.
    • Fixed rare application crash.

    Additional information

    (Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.


    Download links

    UniFi Network Application for Windows

    UniFi Network Application for macOS

    UniFi Network Application for Debian/Ubuntu

    UniFi Network Application for UniFi OS

    UniFi Network Native Application for UniFi OS

    UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***

    unifi_sh_api (shell library)


  • Danke :winking_face: wurde mir nicht angezeigt, erst als ich explizit drauf ging nachde ich es gelesen habe :winking_face:

  • Habe es 1 Minute nach Veröffentlichung rein gestellt 😏

  • BlackSpy

    wie machst du das immer, beobachtest du denn ganzen Tag die Unifiseite ?????

    Vigor 167 - OPNsense- 4x US-8-60W - US-8-150W- US-24-250W - 4 x UAP-AC-PRO- 4 x UAP-AC-M 6 x USW-Flex-Mini - Proxmox-Cluster - HA- Homematic und jede Menge anderen Blödsinn der eigentlich nur Strom frisst aber mir freude macht :smiling_face_with_sunglasses:

  • Ich habe befürchtet das du das sagst :loudly_crying_face::loudly_crying_face:

    Vigor 167 - OPNsense- 4x US-8-60W - US-8-150W- US-24-250W - 4 x UAP-AC-PRO- 4 x UAP-AC-M 6 x USW-Flex-Mini - Proxmox-Cluster - HA- Homematic und jede Menge anderen Blödsinn der eigentlich nur Strom frisst aber mir freude macht :smiling_face_with_sunglasses:

  • Es gab nen neues Update :smiling_face:

    ⢀⣴⠾⠻⢶⣦⠀ Debian - The universal operating system user
    ⣾⠁⢠⠒⠀⣿⡁ https://www.debian.org
    ⢿⡄⠘⠷⠚⠋⠀
    ⠈⠳⣄⠀

    :right_arrow: Dumme Gedanken hat jeder, nur der Weise verschweigt sie. (Wilhelm Busch) :left_arrow:

  • Sorry muss ja auch mal Heim fahren 😏


    UniFi Network Application 7.5.172

    https://community.ui.com/releases/UniFi-Network-Application-7-5-172/ebc52e44-e3c4-4e54-85c7-f9c76a5aeb15


    Improvements

    • Improved the validation of WireGuard VPN Keys.
    • Improved memory usage in certain environments.
    • Removed Update Service Resiliency improvements that override the DNS servers for the UI domains. We'll add messaging in a future release.

    Bugfixes

    • Fixed unable to adopt U-LTE devices on UniFi Gateway Consoles running UniFi OS 3.1.
    • Fixed unable to establish IPsec Site-to-Site VPN with Policy Based Routing connections in rare cases.

    Additional information

    (Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.

    • Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:

    Download links

    UniFi Network Application for Windows

    UniFi Network Application for macOS

    UniFi Network Application for Debian/Ubuntu

    UniFi Network Application for UniFi OS

    UniFi Network Native Application for UniFi OS

    UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***

    unifi_sh_api (shell library)