Beta UniFi OS - Dream Machines 3.2.x

Es gibt 38 Antworten in diesem Thema, welches 5.400 mal aufgerufen wurde. Der letzte Beitrag () ist von BlackSpy.

  • UniFi OS - Dream Machines 3.2.5

    https://community.ui.com/releases/UniFi-OS-Dream-Machines-3-2-5/bd5b3e5f-0459-41c4-b179-33120fa07b56


    Overview


    Bundled application

    Improvements

    • Added support for Shadow Mode. *
    • Added support for Loop Protection. **
    • Subscription-free UniFi Identity (Admins tab -> 'Users') ***
    • Added support for DNS Shield.
    • Added support hostname support for IPsev Site-to-Site VPNs.
    • Added support for the InnerSpace applicaiton, this replaces the MAP option in the Console Settings.
    • Added the console's IP address during setup on the touchscreen.
    • Added max login attempts for SSH, you'll get blocked for 3 minutes if you entered the credentials incorrectly 5 times.
    • Added DNS resiliency for firmware updates.
    • Added fallbacks to default timezones if unsupported ones are provided during setup.
    • Added DNS warnings for consoles that cannot resolve the ui.com domain.
    • Re-enabled the VLAN Magic feature.
    • Improved meshing stability when the consoles are restarting or upgrading.
    • Improved system stability for the UDM by adjusting the fan table.
    • Improved various screens on the Touchscreen.
    • Improved UniFi OS Backup resiliency.
    • Improved detection of failed disks, disks that cannot initializable will be marked as broken.
    • Improved RADIUS stability.
    • Improved WireGuard VPN Disconnection detection for mobile devices.
    • Consoles will no longer erase external storage during a factory reset.
    • Consoles will now always store backups locally before upgrading its firmware, it will auto-recover in case there is file system corruption after a power outage.
    • Updated Suricata to 6.0.12.
    • Updated the console reset button count down from 10 seconds to 5 seconds.
    • Updated the UniFi Logo in the local portal.
    • Updated integrated Access Point firmware to 6.6.38
    • Reduced memory usage of Suspicious Acticity/Content Filtering/Ad Blocking.
    • Reduced network downtime for firmware upgrades.
    • Prevent super admins from deleting their own account.

    * Shadow mode is a console redundancy feature.


    Zitat
    Supported consoles: UDM-Pro / UDM-SE.


    Zitat
    To adopt a shadow console it needs to be the same model, have version 3.2.1 or newer installed, and the shadow console's WAN port needs to be plugged into the main console's LAN port.


    Zitat
    When activated console will store configuration backups to the shadow console automatically.


    Zitat
    In case of main console fails, the customer can click to Activate takeover on the Device screen, replug the cables from the main to the shadow console and it will serve as the main console.


    Zitat
    Future versions will support also a way to configure automatic failover.


    Zitat
    Statistics and data are not copied over the shadow console.

    ** Loop Protection disables a port if there is a loop detected, disabled ports need to be manually re-enabled. It does not depend on Spanning Tree and still disables ports when neighboring devices don't support STP.

    *** UniFi Identity is the new on-premise UniFi user management system. It is a lightweight, single-site, unlimited-user, subscription free option delivering user access to doors, VPN, WiFi, and EV charging — all with a simple tap on the Identity mobile app for iOS and Android. Please note that previous UID options are now named UniFi Identity Enterprise.

    Bugfixes

    • Fixed an issue where servers are not reachable for VPN Clients due to incorrect certificates.
    • Fixed unable to start RADIUS service in rare cases.
    • Fixed night mode scheduling for the UDM's LED.
    • Fixed incorrect WAN IP on the portal after remapping the WAN ports.
    • Fixed an issue with DNS servers for VPN Clients.
    • Fixed an issue where the default route wasn't present when having a Static IP on the WAN interface.
    • Fixed an issue where IGMP Proxy breaks after PPPoE reconnections.
    • Fixed an issue where Traffic Routes didn't take effect for existing connections.
    • Fixed an issue where Traffic Routes conflict with Content Filtering.
    • Fixed inability to see DPI statistics when a setup has a lot of clients.
    • Fixed unexpected behavior when there are multiple Traffic Rules blocking the same domain.
    • Fixed unable to establish IPsec Site-to-Site VPN in rare cases.
    • Fixed an issue where jumbo frames are forwarded on LAN ports when jumbo frames is disabled.
    • Fixed an issue where PPPoE MSS Clamping is lost during provisions.
    • Fixed Suspicious Acticity not working when enabling Jumbo Frames.

    Download links

    UDM

    UDM-Pro

  • Bei einigen gibt es massive Probleme mit der Internet Verbindung nach dem Update.

    Grade die Nutzung eines SFP+ Moduls scheint es zu forcieren.

    Erster workround, bei zB Nutzung Port 10, per SSH.

    Scheinbar funktioniert das Auto Negation umschalten zZ nicht über die GUI.

    Code

    Code
    ethtool -s eth9 autoneg on

    Befehl absetzen und einige Minuten warten. Sollte es nicht sofort gehen letzten Parameter auf "Off" , warten und wieder "on".

    Aufpassen Port 10 ist über CLI eth9, da dort die Zählung bei eth0 anfängt.

  • Ist so wie BlackSpy geschrieben hat...soll wohl eine Art HA Cluster sein.

    Hab gestern das Update gemacht und hatte danach keine Internetconnection bei meinem SFP Fiber Modul auf Port 10:

    LTE Failover über Port 9 ging.

    Hatte nur über die GUI versucht AN ein und auszuschalten.

    Bin dann wieder zurück auf 3.1.16...werds am WE nochmal testen.

    Ticket bei UI hab ich laufen. Sobald es brauchbare NEWs gibt poste ich was passendes.

  • Ubiquiti UDM Pro

  • Bei mir nach dem Update auch kein Internet mehr über Port 9. Nach Umstecken auf Port 8 geht es wieder. Port 9 scheint bei mir jetzt tot zu sein.


    Gleiches Problem wurde auf dem parallelen Updatethread zur UDM SE gepostet.


    Gibt es bestimmt bald ein weiteres Update von UI dazu.


    Gruß

    Klaus

  • ethtool -s eth8 autoneg on

    ⢀⣴⠾⠻⢶⣦⠀ Debian - The universal operating system user
    ⣾⠁⢠⠒⠀⣿⡁ https://www.debian.org
    ⢿⡄⠘⠷⠚⠋⠀
    ⠈⠳⣄⠀

    :right_arrow: Dumme Gedanken hat jeder, nur der Weise verschweigt sie. (Wilhelm Busch) :left_arrow:

  • bei mir das selbe Problem über Port 10, habe ein sfp modul seit dem Update tot. ethtool -s eth9 autoneg on funktioniert nur für eine kurze Zeit.

    Ich muss es immer wiederholen.

    Welches Gerät? SE od. PRO?

    Das hört sich ja fast so an, dass sie da versuchen was an dieser Schnittstelle zu ändern. Es gab ja unteranderen bei 3.0.x -3.1.x immer Aussetzer bei den Zyxel-SFP-Modulen.

    Nur haben sie es wohl verschlimmbessert. :grinning_squinting_face:

  • UniFi OS - Dream Machines 3.2.6

    https://community.ui.com/releases/UniFi-OS-Dream-Machines-3-2-6/bf68d623-7540-4029-8b15-7eebf66e80ce


    Overview


    Bundled application

    Improvements

    • Allow superadmins to manage Shadow Consoles.
    • Improved Shadow Mode UX.
    • Improved compatibility with 1G SFP modules.
    • Improved backup restore resiliency.
    • Improved storage related notifications.
    • Allow disabling Remote Access where there are connection issues.
    • Updated memory settings for the Network Application to improve performance.
    • Updated integrated Access Point firmware to 6.6.49.
    • Updated the FAN behavior for the UDM under high temperature.

    Bugfixes

    • Fixed unable to establish a link when Port 9 was set to 1G manually.
    • Fixed unable to establish a WAN connection when using Starlink and other ISPs that use DHCP Option 121.
    • Fixed unable to complete setup in rare cases.
    • Fixed an issue where information wouldn't be shown in the Dashboard when using IPsec in rare cases.

    Download links

    UDM

    UDM-Pro

  • Da gab auch keine Probleme von den ich gehört habe mit der 3.2.5

    Fixed unable to establish a link when Port 9 was set to 1G manually.
    Fixed unable to establish a WAN connection when using Starlink and other ISPs that use DHCP Option 121.

    Das waren wohl die Probleme für Sterling und CO grade DHCP 121 hat nicht funktioniert und die UDM
    hat benötigte nicht richtig übernommen übernommen die es darüber bekommen hat.