Final UniFi Access Point 7.x.x ONLY U7Pro

Es gibt 3 Antworten in diesem Thema, welches 802 mal aufgerufen wurde. Der letzte Beitrag () ist von BlackSpy.

  • UniFi Access Point 7.0.32

    https://community.ui.com/releases/UniFi-Access-Point-7-0-32/c55b0d30-ceb3-49cc-9daf-f58a3a51051e


    Overview

    * This release is the initial release for the U7-Pro.

    Additional information

    • Refer to the Help Center article here to determine the UniFi Access Point generation.

    If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

    • AP model(s)
    • Previous AP release version
    • UniFi Network application version

    Download links

    U7-Pro

  • UniFi Access Point 7.0.35

    https://community.ui.com/releases/UniFi-Access-Point-7-0-35/61fff80b-affc-489d-81ed-c616e93547ba


    Overview

    UniFi Access Point 7.0.35 is only available for Gen7 Access Points and includes the improvements and fixes listed below.

    Improvements

    • Improved 2.4GHz latency.
    • Improved Voice traffic prioritization.

    Bugfixes

    • Fixed incorrect channel width (20MHz) being reported in device table when 6GHz radio is broadcasting at 320MHz.
    • Fixed connectivity issues with 802.11ac clients (e.g. Broadcom-based MacBooks) leading to stalled WiFi and unexpected disconnects.
    • Fixed missing 6GHz neighbor reports
    • Fixed kernel crashes to improve overall stability.
    • Fixed channel interference being reported as 100% during DFS CAC.
    • Fixed 6GHz channel change causing a full provision (leading to all clients disconnecting) for ~60 seconds.
    • Fixed APs going into "Adoption Failed" state in some cases when using a third-party gateway.

    Known issues

    • SSIDs using RADIUS assigned VLANs or on different VLANs from the native VLAN may operate at slower than expected speeds. This is our top priority to resolve.

    Additional information

    • Refer to the Help Center article here to determine the UniFi Access Point generation.

    If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

    • AP model(s)
    • Previous AP release version
    • UniFi Network application version

    Download links

    U7-Pro | md5sum | sha256sum

  • UniFi Access Point 7.0.43

    https://community.ui.com/releases/UniFi-Access-Point-7-0-43/485c9e44-112d-4e50-9c19-4dafe0e2c9ec


    Overview

    UniFi Access Point 7.0.43 is only available for the U7-Pro and includes the improvements and bugfixes listed below.

    Improvements

    • Improved thermal behavior.
    • Improved 6GHz roaming performance.

    Bugfixes

    • Fixed newly applied WiFi Speed Limit not taking effect until client reconnects.
    • Fixed uptime for clients being reported incorrectly in some cases.
    • Fixed kernel crashes and stalls to improve stability.
    • Fixed channel width being reset to old configuration if it is configured right as an AP is booting when channel is set to Auto.
    • Fixed client IP address being reported incorrectly sometimes.
    • Fixed incorrect channel width being reported when 240MHz is configured on the 5GHz radio.
    • Fixed TX Retries being reported incorrectly.
    • Fixed UAPs on large sites (with 1K+ clients) causing excessive CPU utilization on Network Application consoles/servers.
    • Fixed Medium/Low transmit power configuration resetting to maximum (Auto/High) after firmware update in some cases.
    • Fixed false positive Association failures on the Radios > Connectivity page.
    • Fixed standalone adopted APs sending DNS queries for unifi frequently.
    • Fixed 5GHz SSIDs not broadcasting in Australia when set to channel 165, width 20MHz.

    Known issues

    • SSIDs using RADIUS assigned VLANs or on different VLANs from the native VLAN may operate at slower than expected speeds. This is our top priority to resolve.

    Additional information

    • Refer to the Help Center article here to determine the UniFi Access Point generation.
    • Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Release Candidate.
    • If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

    If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

    • AP model(s)
    • Previous AP release version
    • UniFi Network application version

    Download links

    U7-Pro | md5sum | sha256sum


  • UniFi Access Point 7.0.47

    https://community.ui.com/releases/UniFi-Access-Point-7-0-47/6472023d-fae0-4f7d-a22c-62fd88f264f0


    Overview

    UniFi Access Point 7.0.47 improved temperature management and is only avaialble for Gen7 Access Points.

    Improvements

    • Improved device temperature management.

    Known issues

    • SSIDs using RADIUS assigned VLANs or on different VLANs from the native VLAN may operate at slower than expected speeds. This is our top priority to resolve.

    Additional information

    • Refer to the Help Center article here to determine the UniFi Access Point generation.
    • Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Release Candidate.
    • If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

    If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

    • AP model(s)
    • Previous AP release version
    • UniFi Network application version

    Download links

    U7-Pro | md5sum | sha256sum