UniFi Next-Generation Gateway Pro 3.1.11

https://community.ui.com/releases/UniFi…ea-e437752a8d03

Overview

UniFi Next-Generation Gateway Pro 3.1.11 includes the improvements and bugfixes listed below.

Improvements

• Improved setup flow.
• Improved stability.

Bugfixes

• Fixed high CPU usage caused by Traffic Identification.
• Fixed routing table issue when both WANs are configured with the same subnet.
• Fixed an issue where MSS Clamping was not applied to the gateway's outgoing traffic.
• Fixed issue where QoS on WAN1 affects WAN2 traffic.
• Fixed unable to upgrade from 1.13 to 3.1.

Download links

UXG-Pro

UniFi NeXt-Generation Gateway Pro 3.1.15

https://community.ui.com/releases/UniFi…a6-113b97518648

Overview

UniFi NeXt-Generation Gateway Pro 3.1.15 includes the improvement and bug fixes listed below.

Improvements

• Improved setup flow.

Bugfixes

• Fixed an issue with configuring DNS Settings.
• Fixed an issue where local access to the internal network is impossible through Teleport/L2TP VPN Connections.

Download links

UXG-Pro

Da sind wohl Pro und Lite zu einem geworden

UniFi NeXt-Generation Gateways 3.1.15

https://community.ui.com/releases/UniFi…a6-113b97518648

Overview

UniFi NeXt-Generation Gateways 3.1.15 includes the improvement and bug fixes listed below.

Improvements

• Improved setup flow.

Bugfixes

• Fixed an issue with configuring DNS Settings.
• Fixed an issue where local access to the internal network is impossible through Teleport/L2TP VPN Connections.

Download links

UXG-Lite

UXG-Pro

UniFi NeXt-Generation Gateways 3.1.16

https://community.ui.com/releases/UniFi…9f-e37d9be9756d

Overview

UniFi NeXt-Generation Gateways 3.1.16 adds support for IGMP Proxy on the UXG-Lite.

Improvements

• [UXG-Lite] Added IGMP Proxy support.

Bugfixes

• Fixed an issue where traffic is not routed through the VPN interface if a Traffic Route is configured.
• [UXG-Lite] Fixed Hairpin NAT not working properly.

Download links

UXG-Lite

UXG-Pro

UniFi Gateways 3.2.15

https://community.ui.com/releases/UniFi…38-13492d1e9cc2

Overview

UniFi Gateways 3.2.15 adds support for DNS Shield and improves stability.

DNS Shield

DNS Shield ensures privacy and security of DNS traffic by encrypting it using DNS over HTTPS (DoH).

Improvements

• Added DNS Shield. Required Network Application 7.5+ or newer.
• Added hostname support for IPsec Site-to-Site VPNs. Required Network Application 7.5+ or newer.
• Improved RADIUS stability.
• Improved WireGuard VPN disconnection detection for mobile devices.
• Improved SFP connection compatibility with modules that do not have a proper EEPROM.
• [UXG-Lite] Improved upload throughput when connected to certain GPON services.
• Updated Suricata to 6.0.12.
• Reduced memory usage of Suspicious Activity, Content Filtering, and Ad Blocking.

Bugfixes

• Fixed an issue where the IPv6 address is lost after interface changes until the next RA.
• Fixed unable to start RADIUS service in rare cases.
• Fixed an issue with DNS servers for VPN Client. This applies to the VPN Client feature, not adding clients to VPN Servers.
• Fixed an issue where servers are not reachable for VPN Client due to incorrect certificates. This applies to the VPN Client feature, not adding clients to VPN Servers.
• Fixed an issue where the default route wasn't present when using a static IP on the WAN port.
• Fixed an issue where IGMP Proxy breaks after PPPoE reconnections.
• Fixed an issue where Policy-Based Routes (Traffic Routes) didn't take effect for existing connections.
• Fixed an issue where Policy-Based Routes (Traffic Routes) conflicted with Content Filtering.
• Fixed inability to see DPI statistics for setups with large amounts of clients.
• Fixed unexpected behavior when there are multiple Traffic Rules blocking the same domain.
• Fixed unable to establish IPsec Site-to-Site VPN in rare cases.
• Fixed an issue where Jumbo Frames are forwarded on LAN ports when Jumbo Frames are disabled.
• Fixed an issue where PPPoE MSS Clamping is lost during provisions.
• Fixed Suspicious Activity not working when enabling Jumbo Frames.
• Fixed IPsec Site-to-Site not working issue after migrating USG to UXG.
• Fixed LAN IP address being lost when changing Single Network settings.
• Fixed an issue with establishing a Site-to-Site VPN while Ad Blocking is enabled.
• Fixed unable to establish SSH session while using ui/ui as credentials.
• Fixed RADIUS validation failure when a password ends with a backslash.
• Fixed a gateway configuration error when enabling Country Restrictions.
• [UXG-Pro] Fixed showing "Plug in cable" on the touchscreen when using PPPoE.
• [UXG-Pro] Fixed missing LAN IP on the touchscreen on the setup screen.

Download links

UXG-Lite

UXG-Max

UXG-Pro

UniFi Gateways 3.2.17

https://community.ui.com/releases/UniFi…19-a3d911ca087a

Overview

UniFi Gateways 3.2.17 includes the improvements and bugfixes listed below.

Improvements

• Improved the setup experience.
• Improved stability when using Traffic Identification.

Bugfixes

• Fixed high CPU usage issue due to dnsmasq.
• Fixed an issue with Guest Firewall rules.

Download links

UXG-Lite

UXG-Max

UXG-Pro