Beta Unifi USW 7.x.x alle (außer Ultra)

**BlackSpy** · 31. Dezember 2023

UniFi Switch 7.0.33

https://community.ui.com/releases/UniFi-Switch-7-0-33/701c2b49-d330-45a0-afe8-b9ff1a569e2a

Overview

This release is only for the USW-Pro-Max switches.

Improvements

Improved SFP module compatibility.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.

If you encounter any issues with this release, please provide us some details on your setup and include the below information:

Switch model(s)
Previous Switch release version
UniFi Network application version

Download links

USW-Pro-Max/USW-Pro-Max-PoE | md5sum | sha256sum

**BlackSpy** · 15. Februar 2024

UniFi Switch 7.0.40

https://community.ui.com/releases/UniFi-Switch-7-0-40/0a417343-8c4a-4835-9229-4b8b98b1193a

Improvements

Added support for Global ACL Rules.
[USW-Pro-Max] Added support for Port Locating on LCM.
[USW-Enterprise-8-PoE] Improved device stability after config provision.
[USW-Pro-Aggregation] Improved SFP28 link stability for manual speed 25Gbps ports.

Bugfixes

[USW-Pro-Max] Fixed Etherlighting doesn't work if the port speed is 10Mbps.
[USW-Pro-Max] Fixed routing to other L3 networks may not work after reboot.
[USW-Pro-Max] Fixed Port Native VLAN does not work when VLAN Magic settings are configured.
[USW-Pro] Fixed occasional device freezes during firmware updates.
[USW-Enterprise-8-PoE] Fixed incorrect STP path cost when STP mode is running.
[USP-PDU-Pro] Fixed not showing power utilization on ports where lower power consumption devices are connected.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us some details on your setup and include the below information:

Switch model(s)
Previous Switch release version
UniFi Network application version

Download links

US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum

US-L2-POE | md5sum | sha256sum

US-16-XG | md5sum | sha256sum

US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum

USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum

USW-Aggregation | md5sum | sha256sum

USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum

USW-Pro-8-PoE/USW-Pro-Max-24-48-POE/USW-Pro-Max-24-48 | md5sum | sha256sum

USW-Flex/USP-RPS | md5sum | sha256sum

USP-RPS-Pro | md5sum | sha256sum

USP-PDU-Pro | md5sum | sha256sum

USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum

USW-Multi | md5sum | sha256sum

**BlackSpy** · 16. Februar 2024

Die Download Links wurden gefixt, gestern hatte UI wohl ausersehen die Links für 7.0.38 veröffentlicht

**BlackSpy** · 4. März 2024

UniFi Switch 7.0.44

https://community.ui.com/releases/UniFi-Switch-7-0-44/bdc87b8a-e393-4aa4-a7f5-76789235d08c

Improvements

Added a new PoE current-usage screen on the touchscreen.
Added PoE Off state on the touchscreen.
[USW-Gen1] Improved CPU usage when forwarding PTPv2 traffic.

Bugfixes

Fixed unexpected log spam related to memory checks.
[USW-Enterprise-24-PoE] Fixed an issue where wireless clients couldn't roam when Restricted by MAC ID is enabled on the port that an AP is connected to.
[USW-Flex] Fixed PoE issues introduced in 7.0.40.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us some details on your setup and include the below information:

Switch model(s)
Previous Switch release version
UniFi Network application version

Download links

US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum

US-L2-POE | md5sum | sha256sum

US-16-XG | md5sum | sha256sum

US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum

USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG

24 | md5sum | sha256sum

USW-Aggregation | md5sum | sha256sum

USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum

USW-Pro-8-PoE/USW-Pro-Max-24-48-POE/USW-Pro-Max-24-48 | md5sum | sha256sum

USW-Flex/USP-RPS | md5sum | sha256sum

USP-RPS-Pro | md5sum | sha256sum

USP-PDU-Pro | md5sum | sha256sum

USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum

USW-Multi | md5sum | sha256sum

**defcon** · 5. März 2024

Zitat von BlackSpy

[USW-Flex] Fixed PoE issues introduced in 7.0.40.

jo jetzt läuft die 7er auch endlich... musste vorher downgraden weil der Flex ausgestiegen ist

**BlackSpy** · 26. März 2024

UniFi Switch 7.0.46

https://community.ui.com/releases/UniFi-Switch-7-0-46/7b6e9301-c118-47e8-b26f-c2e80e61cc02

Bugfixes

[USW-Pro-Max] Fixed an issue that caused the memory usage to increase slowly over time.
[USW-Pro-Aggregation] Fixed an issue where the switch stops passing Inter-VLAN traffic under heavy load.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
Your device's Etherlighting ports may turn off for ~5 minutes after firmware upgrades to upgrade the Etherlighting firmware.
Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us some details on your setup and include the below information:

Switch model(s)
Previous Switch release version
UniFi Network application version

Download links

US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum

US-L2-POE | md5sum | sha256sum

US-16-XG | md5sum | sha256sum

US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum

USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum

USW-Aggregation | md5sum | sha256sum

USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum

USW-Pro-8-PoE/USW-Pro-Max-24-48-POE/USW-Pro-Max-24-48 | md5sum | sha256sum

USW-Flex/USP-RPS | md5sum | sha256sum

USP-RPS-Pro | md5sum | sha256sum

USP-PDU-Pro | md5sum | sha256sum

USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum

USW-Multi | md5sum | sha256sum

**BlackSpy** · 4. April 2024

UniFi Switch 7.0.50

https://community.ui.com/releases/UniFi-Switch-7-0-50/f803fb85-570e-43fa-ac21-65a1c69d8c2b

Improvements

[USW-Pro-Max] Improved latency for configuring Etherlightning modes. Requires Network Application 8.1.122 or newer.

Bugfixes

[USW-Pro-Aggregation] Fixed an issue where provisioning changes take longer when disabling Loop Protection on Aggregrated ports.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
Your device's Etherlighting ports may turn off for ~5 minutes after firmware upgrades to upgrade the Etherlighting firmware.
Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us some details on your setup and include the below information: