Whaaattttt???? Crazy!!!
So you got it working... That’s the most important.
Have fun! Bye Hoppel
Yeah, I wasted 8 hours on this...
But - it is working now.... Now I've got to deal with strato dyndns 
Beiträge von scope
-
-
Hey!
Thanks a lot for the screenshots.For clarification, when you activate via phone support ipv4, you get dual stack from this point you can either only use ipv4 or ipv6 and ipv4 at the same time.
I checked my configuration and compared to yours, I could not find any mistakes. So after some frustration, I decided to call technical support and asked them to check my password. The password was fine, but check this sh**:
They did not print the user name correctly on the paper "swfl-it" should be at the end.... Anyhow, now everything is working.
Alles anzeigenHi scope
First of all You would need the IPv4 connection from Stadtwerke (I’ve never investigated whether this was a Dual Stack og plain IPv4 connection - but the price you mention indicate that it's the same sollution).
In the setup I’ve made for my friend we didn’t need / want the FritzBox at all (it has been returned to Stadtwerke I believe). You might need the FritzBox if you’re using it for telephone, TV and other services??? - found some posts about this. In this case I can’t help - You would need to setup the FritzBox as a bridge I belive.
Once You have the IPv4 connection the process should be very straight forward. Best option would probably be to reset your UDM Pro and follow the guided setup. As far as I recall this is how I approached the setup process.
Screenshot from the tab “Internet”. I left the IPv6 active because I wasn’t sure about the Dual Stack or not, and I haven’t had the time / opportunity to figure it out. Username and Password is the same as you use on your FritzBox. The "Expected ISP Speeds are from the guided setup but as far as I know you can manually enter them (should be acording to your ISP connection).
In the tab “Networks” I also left the IPv6 configuration - but again, I'm not sure IPv6 is working :-).
Hope this helps.
-
Da 9ck nicht mehr sehr aktiv ist: hat jemand sonst eine Idee wie die Einrichtung hier aussehen soll?
Weitere Infos:- Ich habe bei dem ISP die ipv4 bestellt
- Im Fritzbox kann ich ipv6 komplet deaktivieren
- Fritzbox baut mit den Zugangsdaten eine Verbindung ohne Probleme auf
- Wenn ich nun den Kabel auf das WAN Port des UDPs setzte, und unter "Internet" PPPOE mit den Zugangsdaten konfiguriere, kann ich mich nicht verbinden.
- Ich habe sowohl mit ipv6 als auch mit ipv4 versucht, mit auto DNS oder min manuell, keine Kombi funktioniert. Ich stell dabei ipv4 auf PPPOE und trage die Zugangsdaten ein. Es funktioniert nicht.
Hat jemand eine Idee?
-
We got my friend’s UDM-SE up and running yesterday. He asked the Stadtwerke to change the type of connection - either to a Dual Stack or a plain IPv4. I’m not sure which type of connection / it’s not clear to me when he refers to the conversation he has had with Stadtwerke. There were no issues whatsoever connecting to the WAN after the type of connection was changed (actually I guided him over the phone). I’ve tried to set to IPv6 as described but I don’t know how to check from off site. My friend has been very busy - so we’ll have a look at IPv6 later if he got a Dual Stack. I’ll let you know.
Thank you again Hoppel.
Hey 9ck. I am also at Stadtwerke Flensburg and I am looking to enable a connection with my UDM-Pro. Could I ask you to organize a screenshot of the settings for me? If I configure ipv4, provide login data for pppoe and dissable ivp6, the UDM cant connect. Fritzbox connects with the same settings.
Also, I confirm that Stadtwerke will provide for 10€ single payment and 1.5€ per month a dynamic ipv4 address.
