Beta UAP 5.x.xx

UAP Firmware 5.43.41

https://community.ui.com/relea…be-419c-add6-4761822e35e0

Overview:

This is the second phase in our series of regression testing the 5.43.x firmware line. Thank you to all who have participated so far.

We realize that the version string on this release is lower than our previous beta release of 5.71.1. This is because we are trying to nail down the cause of the DHCP issues being experienced by some of our users with networks that involve a third-party DHCP server.

We are specifically looking for help from our beta community to test this release on networks that do NOT use a UniFi DHCP Server (such as UDM, USG, UXG). We are interested in feedback from these networks with regards to the following symptoms being experienced:

1. Clients unable to connect or get an IP successfully right after firmware update

2. Clients intermittently losing connectivity. We are very interested in this scenario, especially if it is fixed by rebooting the AP.

Please also feel free to report anything out of the ordinary that is not covered by the above cases. Thank you once again for your contributions to the success of our products!

Improvements:

[UAP] DHCP optimization.

Additional information:

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

Controller version.

Firmware version (previous and current).

Device model(s).

UAP Firmware 5.43.42

https://community.ui.com/relea…35-4775-b7cd-9d59a97a1254

Overview:

We realize that the version string on this release is lower than our previous beta release of 5.71.1. This is because we are trying to nail down the cause of the DHCP issues being experienced by some of our users with networks that involve a third-party DHCP server.

We are specifically looking for help from our beta community to test this release on networks that do NOT use a UniFi DHCP Server (such as UDM, USG, UXG). We are interested in feedback from these networks with regards to the following symptoms being experienced:

1. Clients unable to connect or get an IP successfully right after firmware update

2. Clients intermittently losing connectivity. We are very interested in this scenario, especially if it is fixed by rebooting the AP.

Please also feel free to report anything out of the ordinary that is not covered by the above cases. Thank you once again for your contributions to the success of our products!

Improvements:

Improve auto-channel in 2.4 GHz.

Improve wireless downlink connectivity with non-native management VLANs.

Additional information:

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

Controller version.

Firmware version (previous and current).

Device model(s).

Euch ist aber klar da diese Versionen ganz spezielle sind.

Dies sind Testversionen für AP die keinen Unifi DHCP haben!!!, also ohne USG oder UDM's betrieben werden

UAP Firmware 5.43.43

https://community.ui.com/relea…0b-43e4-b38d-f68c30f99e50

Overview

We realize that the version string on this release is lower than our previous beta release of 5.71.1. This is because we are trying to nail down the cause of the DHCP issues being experienced by some of our users with networks that involve a third-party DHCP server.

We are specifically looking for help from our beta community to test this release on networks that do NOT use a UniFi DHCP Server (such as UDM, USG, UXG). We are interested in feedback from these networks with regards to the following symptoms being experienced:

1. Clients unable to connect or get an IP successfully right after firmware update

2. Clients intermittently losing connectivity. We are very interested in this scenario, especially if it is fixed by rebooting the AP.

Please also feel free to report anything out of the ordinary that is not covered by the above cases. Thank you once again for your contributions to the success of our products!

Improvements;

Improve auto-channel in 2.4 GHz.

Bugfixes;

Fix issue where AP was unreachable at boot when management VLAN was enabled, introduced in 5.43.42.

Additional information;

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 5.60.13

https://community.ui.com/relea…3f-4212-b6ae-ac6c74acef45

Improvements:

[UAP-MTK] Improve 2.4GHz auto-channel selection.

[UAP-MTK] Improve WiFi connectivity.

[UAP-MTK] Improve overall stability.

[UAP-MTK] Improve bluetooth bridge (used to link UniFi Protect Bluetooth devices)

[U6-Lite/LR] Improve radar detection.

[U6-LR] Always enable encrypted netconsole logging.

Bugfixes:

[UAP-MTK] Fix adoption failure issue.

[UAP-MTK] Fix PMF connectivity issue

[UAP-MTK] Fix LED issue.

[UAP-MTK] Fix client can't obtain IP address on VLAN SSID issue.

[U6-Lite/LR] Fix WPA3 SAE connectivity issue.

[U6-Lite/LR] Fix standalone mode issue.

[U6-LR] Fix 2.4GHz device periodical disconnection issue.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

Controller version.

Firmware version (previous and current).

Device model(s).

UAP Firmware 5.43.44

https://community.ui.com/relea…5c-41f2-83fe-3d46f9ad3642

Overview:

We realize that the version string on this release is lower than our previous beta release of 5.71.1. The reason for this tag being released to beta is that we are trying to release some bug fixes for QCA AP's to the public (Official).

Thank you for being a great beta community!

Improvements:

[UAP] Enable 11k neighbor reports independent/regardless of Fast Roaming configuration.

[UAP] Improve wireless uplink reliability.

Bugfixes:

[UAP] Fix issue where disabling high performance device option does not flush currently blocked clients.

Additional information:

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

Controller version.

Firmware version (previous and current).

Device model(s).

UAP Firmware 5.43.45

https://community.ui.com/relea…7a-417a-a81b-9981eabfbc21

Overview:

We realize that the version string on this release is lower than our previous beta release of 5.71.1. The reason for this tag being released to beta is that we are trying to release some bug fixes for QCA AP's to the public (Official).

Thank you for being a great beta community!

Improvements:

[UAP-Gen3] Remove support for wireless uplink over 2.4GHz.

[UAP] DHCP interoperability improvements for 3rd party DHCP servers.

Bugfixes:

[UAP] Fix WLAN guest policies not working when guest portal is disabled.

Additional information:

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

Controller version.

Firmware version (previous and current).

Device model(s).

Versions verwirrt🤔

UAP Firmware 5.43.46

https://community.ui.com/relea…56-48a7-8a7e-4d9fc5f357c0

Overview

* This release is only for the following models:

UAP-AC-Lite/LR/Pro/M/M-PRO/IW

UAP-HD/SHD/XG/BaseStationXG

We realize that the version string on this release is lower than our previous beta release. The reason for this tag being released to beta is that we are trying to release some bug fixes for QCA AP's to the public (Official).

Thank you for being a great beta community!

Improvements:

[UAP-Gen2/3] Improve DHCP reliability.

[UAP-Gen2/3] Improve stability by reducing memory leaks.

[UAP-Gen2/3] Improve WiFi stability.

Additional information:

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

Application version.

Firmware version (previous and current).

Device model(s).

Verwirrung Teil 2

UAP Firmware 5.77.2

https://community.ui.com/relea…8a-4817-b5ab-d1486cfa0223

Overview

* This release is only for the following models:

UAP-nanoHD/IW-HD/FlexHD/BeaconHD

U6-Lite

U6-LR

U6-Pro/Mesh

Improvements:

[U6-Pro] Add support for RF scanning.

[U6-Pro] Improve connectivity with G3-Micro cameras.

[U6-Mesh] Enable DFS support.

[UAP-Gen4/5] Improve 2.4GHz IoT devices connectivity.

[UAP-Gen4/5] Enhance wireless uplink performance when reconnecting to the root AP.

[UAP-Gen5] Enhance radar detection.

[UAP-Gen4] Improve WiFi broadcast traffic reliability.

[UAP] Improve bluetooth bridge stability.

[UAP] Improve DHCP reliability.

[UAP] Improve WiFi stability.

Bugfixes:

[U6-Pro] Fix multicast->unicast conversion with dynamic VLAN networks.

[UAP-Gen4/5] Fix issue that 5GHz auto channel always selects channel 36.

[UAP-Gen4/5] Fix issue that client can't connect to WLAN with VLAN enabled.

[UAP-Gen5] Fix BLE RSSI missing issue.

[UAP-Gen4] Fix 802.11h wrong capability bit.

[UAP-Gen4] Fix wrong txpower when wireless uplink is enabled.

[UAP] Fix issue with High Performance Device deny list not getting flushed upon setting change.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

Application version.

Firmware version (previous and current).

Device model(s).

Lade sie dir per Hand rein

U6-LR

https://dl.ui.com/unifi/firmwa…7.2+13434.210928.2235.bin

U6-Pro

https://dl.ui.com/unifi/firmwa…7.2+13434.210928.2241.bin

Die U6 Pro müssen, soweit noch nicht geschehen, erst auf Version 5.67.0 geupt werden bevor sie weiter auf höhere Versionen gehen können

Ich denke deine UDM steht nicht auf Beta, daher die Meldung für das Downgrade und daher wohl kein automatisches Update.

Schau mal in deinen System Settings der UDM unter Update

Seltsam.....gibt womöglich im Controller noch einen Punkt.