Ich trenne hier mal UAP und USW, wird sonst zu unübersichtlich.

UAP Firmware 5.55.11. NUR AP U6-PRO !!!!

soll ich überhaupt Beta für Device Posten die in DACH nicht erhältlich sind?

https://community.ui.com/relea…dc-489c-8674-841899486a04

Overview

* This release is specifically for the U6-Pro.

Improvements

• [U6-Pro] Improve overall stability.
• [U6-Pro] Improve performance at medium/long range.

UAP/USW Firmware 5.60.3

https://community.ui.com/relea…90-4321-ab6c-ae8c82b17edb

Improvements

• [UAP] Improve compatibility with WPA Wireless Clients.

Bugfixes

• [USW-Flex-XG] Fix jumboframe doesn't work if config changed.
• [USW-Agg] Fix incorrect speed reporting via SNMP.
• [USW-MC] Fix issue with incorrect outlet power being shown.
• [HW] Fix debug terminal doesn't work.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP/USW Firmware 5.63.0

https://community.ui.com/relea…30-43cb-9c81-105a8a45c228

Improvements

• [UAP] Improve topology detection.
• [UAP] Add U6-Pro support.
• [UAP] Improve general stability.
• [UAP] Improve compatibility with WPA3 Wireless Clients.
• [U-LTE] Improve compatibility with non-standard MTUs.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
• Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
• All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Nur für U6Pro

UAP Firmware 5.63.1(only U6Pro)

https://community.ui.com/relea…3b-49d6-8cc5-3e668239862e

Overview

* This release is specifically for the U6-Pro.

Improvements

[U6-Pro] Enable DFS channels and 160 MHz.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 5.67.0 NUR U6-Pro

https://community.ui.com/relea…9e-4ce4-9c34-c1af201119a9

Overview:

* This release is only for the U6-Pro.

Improvements:

[U6-Pro] Downgrading from 5.67.0 is not possible.

[U6-Pro] Enable DFS channels and 160 MHz bandwidth.

[U6-Pro] Improve fast roaming.

Bugfixes;

[U6-Pro] Fix random client disconnects and reconnects when the client is inactive.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

U6-Pro needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+. (once 5.68.0+ is released)

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 5.60.7 für UAP HD Varianten und U6-Lite und LR

https://community.ui.com/relea…ae-40e9-804c-0f834c2ba6b7

Improvements:

[UAP-MTK] Improve connectivity during WiFi AI scan.

[UAP-MTK] Improve initial connection reliability.

Bugfixes:

[UAP-MTK] Fix broadcast failing after a channel switch or WiFi AI scan.

[U6-LR] Fix memory leak.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 5.43.37

https://community.ui.com/relea…85-4bef-9a4d-1a151669ee13

Overview

* This release is only for the following AP's:

UAP-AC-Lite/LR/Pro/M/M-PRO/IW

UAP-HD/SHD/XG/BaseStationXG

--

We realize that the version string on this release is lower than our previous beta release of 5.63.0. The reason for this tag being released to beta is that we are trying to release some bug fixes for QCA AP's to the public (Official).

Thank you for being a great beta community!

Bugfixes:

[UAP-AC-Lite/LR/Pro/Mesh/IW] Fix connectivity issues when AP is under heavier load (TX OVERFLOW issue).

[UAP] Speed up wireless adoption.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 5.60.9

https://community.ui.com/relea…bd-4bd8-b6f9-d952daf14f5a

Overview

We realize that the version string on this release is lower than our previous beta release of 5.63.0. The reason for this tag being released to beta is that we are trying to release some bug fixes for MTK APs and U6 AP's to the public (Official).

Thank you for being a great beta community!

Improvements:

[UAP-MTK] Improve ability for clients to receive DHCP responses, especially with 3rd party servers.

[UAP-MTK] Improve connectivity when using WiFi SAE.

Bugfixes:

[UAP-MTK] Fix issue where Fast Roaming does not get enabled correctly.

[U6-LR] Fix issue where QBSS channel utilization is always 0, improving client load distribution.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 5.43.38

https://community.ui.com/relea…aa-4c25-b75b-0be9a9b73074

Overview:

* This release is only for the following AP's:

UAP-AC-Lite/LR/Pro/M/M-PRO/IW

UAP-HD/SHD/XG/BaseStationXG

--

We realize that the version string on this release is lower than our previous beta release of 5.63.0. The reason for this tag being released to beta is that we are trying to release some bug fixes for QCA AP's to the public (Official).

Thank you for being a great beta community!

Improvements:

[UAP] Improve wireless uplink connectivity.

Bugfixes:

[UAP-QCA] Fix connectivity after a DFS event occurs.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 5.71.0 nur U6 Pro und U6 Mesh

https://community.ui.com/relea…d5-4f4c-bef1-91ea9964ffcd

Overview

* This release is only for the U6-Pro and U6-Mesh.

Improvements:

[UAP] Improve fast roaming speed and reliability.

[UAP] Improve NTP sync accuracy.

[UAP] Speed up wireless adoption.

[UAP] Improve wireless uplink stability.

[HW] Include cached buffers as free memory.

Bugfixes:

[U6-Pro] Correct LLDP PD advertisement.

[U6-Pro] Fix rare cases of firmware updates failing.

[UAP] Fix intermittent issue with WLANs not coming up when a wireless downlink is wired-connected to a network.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

UAP Firmware 5.60.10

https://community.ui.com/relea…94-4ff4-baa9-c0b933c596d5

Improvements

[UAP] Improve 2.4GHz clients stability.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

und da soll mal einer durchblicken???!!!!!

UAP/USW Firmware 5.71.1

https://community.ui.com/relea…4f-4b86-8c22-ed4ac0bb6912

Improvements:

[UAP-Gen2] Improve connectivity during WiFi scans.

[UAP] Speed up wireless adoption.

[UAP] Improve wireless uplink stability

[UAP] Improve NTP sync accuracy.

[UAP] Improve fast roaming speed and reliability.

[USP-Pro-PDU] Improve topology detection.

[USW-Aggregation] Improve 10G auto-negotiation after reboot.

[HW] Include cached buffers as free memory.

[HW] Improve device connectivity to the Network Application to avoid intermittent device disconnects.

[HW] Redesign Management VLAN implementation.

Bugfixes:

[UAP] Fix intermittent issue with WLANs not coming up when a wireless downlink is wired-connected to a network.

[UAP] Fix memory leak on APs with a configurable LED color.

[UAP] Fix 802.11d country advertisement when country is set to Canada.

[USW-Enterprise-8-PoE] Fix UF-RJ45-1G link issue.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Zitat

U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+

Das ist was Unifi vor gibt.

mal per SSH probiert?

https://help.ui.com/hc/en-us/a…1F8GWSNHCB18N8Z2PKGDXEYDY

SSH / Shell verbinden

und in SSH das Kommando

 upgrade https://dl.ui.com/unifi/firmware/UAP6MP/5.71.1.13253/BZ.ipq50xx_5.71.1+13253.210727.1443.bin

ist die neuste FW für den U6

UAP Firmware 5.43.40

https://community.ui.com/relea…0c-4a86-b009-508575280abb

Improvements;

[UAP] DHCP optimization.

Additional information;

We realize that the version string on this release is lower than our previous beta release of 5.71.1. This is because we are trying to nail down the cause of the DHCP issues being experienced by some of our users with networks that involve a third-party DHCP server.

We are specifically looking for help from our beta community to test this release on networks that do NOT use a UniFi DHCP Server (such as UDM, USG, UXG). We are interested in feedback from these networks with regards to the following symptoms being experienced:

1. Clients unable to connect or get an IP successfully right after firmware update

2. Clients intermittently losing connectivity. We are very interested in this scenario, especially if it is fixed by rebooting the AP.

Please also feel free to report anything out of the ordinary that is not covered by the above cases. Thank you once again for your contributions to the success of our products!

Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.

All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

Controller version.

Firmware version (previous and current).

Device model(s).