Hallo
Es gibt von der UDM SE verschieden Hardwareversionen. Die wurde auffällig als ab der OS 3.0.x die Ansteuerung der Lüfter je nach Hardware unterschiedlich war.
Ich dachte, man könnte diese Informationen sammel, was noch unterschiedlich bei den UDM SE ist.
Meine ist eine sehr frühe Version, die durch Ubiquiti noch mit der Bezeichnung UDM Pro SE herausgegeben wurde.
Mainboardversion : Rev. 19
Ausgelesen per SHH folgende Informationen:
root@UDMProSE:~# lspci
0000:00:00.0 Ethernet controller: Annapurna Labs Ltd. SFP+ 10G Ethernet Adapter (rev 03)
0000:00:02.0 Ethernet controller: Annapurna Labs Ltd. SFP+ 10G Ethernet Adapter (rev 03)
0000:00:03.0 Ethernet controller: Annapurna Labs Ltd. Gigabit Ethernet Adapter (rev 02)
0000:00:04.0 Network and computing encryption device: Annapurna Labs Ltd. Device 0022 (rev 02)
0000:00:05.0 RAID bus controller: Annapurna Labs Ltd. Device 0022 (rev 02)
0000:00:05.1 RAID bus controller: Annapurna Labs Ltd. Device 8022 (rev 02)
0000:00:08.0 SATA controller: Annapurna Labs Ltd. Device 0031 (rev 02)
0001:00:00.0 PCI bridge: Annapurna Labs Ltd. Device 0031 (rev 01)
0001:01:00.0 USB controller: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
0002:00:00.0 PCI bridge: Annapurna Labs Ltd. Device 0031 (rev 01)
0002:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
root@UDMProSE:~# lscpu
Architecture: aarch64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Vendor ID: ARM
Model: 3
Model name: Cortex-A57
Stepping: r1p3
BogoMIPS: 116.66
Vulnerability Itlb multihit: Not affected
Vulnerability L1tf: Not affected
Vulnerability Mds: Not affected
Vulnerability Meltdown: Not affected
Vulnerability Spec store bypass: Vulnerable
Vulnerability Spectre v1: Mitigation; __user pointer sanitization
Vulnerability Spectre v2: Vulnerable
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
root@UDMProSE:~# lsusb
Bus 002 Device 002: ID 05e3:0749 Genesys Logic, Inc. SD Card Reader and Writer
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 1f9b:157e Ubiquiti Networks, Inc. Ulcd application
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@UDMProSE:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 774.5M 0 loop /mnt/.rofs
sda 8:0 0 119.2G 0 disk
├─sda1 8:1 0 512M 0 part
├─sda2 8:2 0 7G 0 part [SWAP]
└─sda5 8:5 0 111.2G 0 part /ssd1
sdb 8:16 0 465.8G 0 disk
├─sdb1 8:17 0 512M 0 part
├─sdb2 8:18 0 2G 0 part
├─sdb3 8:19 0 1G 0 part
└─sdb5 8:21 0 457.8G 0 part
└─md3 9:3 0 457.6G 0 raid1 /volume1
mtdblock0 31:0 0 1.8M 0 disk
mtdblock1 31:1 0 64K 0 disk
mtdblock2 31:2 0 64K 0 disk
mtdblock3 31:3 0 64K 1 disk
mtdblock4 31:4 0 64K 1 disk
mtdblock5 31:5 0 6M 0 disk
boot 135:0 1 14.7G 0 disk
├─boot1 135:1 1 64M 0 part
├─boot2 135:2 1 32M 0 part
├─boot3 135:3 1 2G 0 part /boot/firmware
├─boot4 135:4 1 1G 0 part /var/log
├─boot5 135:5 1 4G 0 part /data
├─boot6 135:6 1 2G 0 part /persistent
└─boot7 135:7 1 5.6G 0 part /mnt/.rwfs