Final UniFi Switch 7.x.x

**BlackSpy** · 14. Dezember 2023

UniFi Switch 7.0.25

Overview

This release is only for the USW-Pro-Max switches.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.

If you encounter any issues with this release, please provide us some details on your setup and include the below information:

Switch model(s)
Previous Switch release version
UniFi Network application version

Download links

USW-Pro-Max/USW-Pro-Max-PoE | md5sum | sha256sum

**anton** · 14. Dezember 2023

Nein, ich muss bei dem Switch widerstehen, ich brauch ihn (noch) nicht

aber die blinki Led ist soo o nice

**BlackSpy** · 8. Januar 2024

UniFi Switch 7.0.33

https://community.ui.com/releases/UniFi-Switch-7-0-33/b6f60df4-cddc-46cd-9a69-8f20ea7f6daa

Overview

UniFi Switch 7.0.33 improves SFP Module compatibility and is only available for the USW-Pro-Max switches.

Improvements

Improved SFP module compatibility.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.

If you encounter any issues with this release, please provide us some details on your setup and include the below information:

Switch model(s)
Previous Switch release version
UniFi Network application version

Download links

USW-Pro-Max/USW-Pro-Max-PoE | md5sum | sha256sum

**BlackSpy** · 20. März 2024

UniFi Switch 7.0.44

https://community.ui.com/releases/UniFi-Switch-7-0-44/b3433760-115d-4fb0-9799-535bbd1af94f

Overview

UniFi Switch 7.0.44 adds support for Global ACL Rules on L3 switches.

Improvements

Added support for Global ACL Rules. This requires Network Application 8.1.113 or newer.
Added a new PoE current-usage screen on the touchscreen.
Added PoE Off state on the touchscreen.
Improved SFP module compatibility.
[USW-Pro-Max] Added support for Port Locating on the touchscreen.
[USW-Enterprise-8-PoE] Improved device stability after config provision.
[USW-Pro-Aggregation] Improved SFP28 link stability for manual speed 25Gbps ports.
[USW-Gen1/USW-Pro] Improved CPU usage when forwarding PTPv2 traffic.
[USW] Increased the maximum number of LAG groups.

Bugfixes

Fixed unexpected log spam related to memory checks.
[USW-Enterprise-24-PoE] Fixed an issue where wireless clients couldn't roam when Restricted by MAC ID is enabled on the port that an AP is connected to.
[USW-Pro-Max] Fixed Etherlighting not working if the port speed is 10Mbps.
[USW-Pro-Max] Fixed an issue where routing to other L3 networks may not work after a reboot.
[USW-Pro-Max] Fixed Port Native VLAN not working when VLAN Magic settings are configured.
[USW-Pro] Fixed occasional device freezes during firmware updates.
[USW-Enterprise-8-PoE] Fixed incorrect STP path cost when STP mode is running.
[USP-PDU-Pro] Fixed not showing power utilization on ports where lower power consumption devices are connected.

Known issues

You might experience slow memory increase on USW-Pro-Max switches, this will be fixed in a upcoming firmware release.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.

If you encounter any issues with this release, please provide us some details on your setup and include the below information:

Switch model(s)
Previous Switch release version
UniFi Network application version

Download links

US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum

US-L2-POE | md5sum | sha256sum

US-16-XG | md5sum | sha256sum

US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum

USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum

USW-Aggregation | md5sum | sha256sum

USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum

USW-Pro-8-PoE/USW-Pro-Max-24-48-POE/USW-Pro-Max-24-48 | md5sum | sha256sum

USW-Flex/USP-RPS | md5sum | sha256sum

USP-PDU-Pro/HD | md5sum | sha256sum

USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum

USW-Multi | md5sum | sha256sum

**BlackSpy** · 8. Mai 2024

UniFi Switch 7.0.50

https://community.ui.com/releases/UniFi-Switch-7-0-50/5cf88e42-245e-45f6-82f9-533212c1b2ea

Improvements

[USW-Pro-Max] Improved latency for configuring Etherlighting modes. Requires Network Application 8.1.122 or newer.

Bugfixes

[USW-Pro-Max] Fixed an issue that caused the memory usage to increase slowly over time.
[USW-Pro-Aggregation] Fixed an issue where the switch stops passing Inter-VLAN traffic under heavy load.
[USW-Pro-Aggregation] Fixed an issue where provisioning changes take longer when disabling Loop Protection on Aggregrated ports.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
Your device's Etherlighting ports may turn off for ~5 minutes after firmware upgrades to upgrade the Etherlighting firmware.

If you encounter any issues with this release, please provide us some details on your setup and include the below information:

Switch model(s)
Previous Switch release version
UniFi Network application version

Download links

US-8/16/24/48/###W/USW-Industrial/USC-8 | md5sum | sha256sum

US-L2-POE | md5sum | sha256sum

US-16-XG | md5sum | sha256sum

US-XG-6POE/USW-Pro/USW-Pro-POE/USW-Enterprise-24-PoE | md5sum | sha256sum

USW-Pro-Aggregation/USW-Enterprise-48-PoE/USW-EnterpriseXG-24 | md5sum | sha256sum

USW-Aggregation | md5sum | sha256sum

USW-Flex-XG/USW-Enterprise-8-PoE | md5sum | sha256sum

USW-Pro-8-PoE/USW-Pro-Max-16-24-48-POE/USW-Pro-Max-16-24-48 | md5sum | sha256sum

USW-Flex/USP-RPS | md5sum | sha256sum

USP-PDU-Pro/USP-PDU-HD | md5sum | sha256sum

USW-16/24/48-POE/USW-24-48/USW-Lite-8/16-POE/USW-Mission-Critical | md5sum | sha256sum

USW-Multi | md5sum | sha256sum

**BlackSpy** · Montag, 11:52

UniFi Switch 7.1.26

https://community.ui.com/releases/UniFi-Switch-7-1-26/33e34ca9-ff95-498a-9d4e-98ab2dd58b1c

Overview

UniFi Switch 7.1.26 adds support for Advanced IGMP Snooping and screen rotation.

Improvements

Added support for Advanced IGMP Snooping.
Expanded options when IGMP Snooping is enabled.
Fast Leave
Forward unknown multicast traffic
Querier IP
Ports can be defined as "Multicast Router Port" if IGMP Snooping is enabled.
Requires UniFi Network Application 8.4.54 or newer.
Added support for screen rotation.
Requires UniFi Network Application version 8.4.54 or newer.
Improved the Etherlighting firmware update process.
[USW-Pro-Aggregation] Improved 25G speed link stability.
[USW-Pro-PoE] Improved PoE compatibility with 3rd-party cameras.
[USW-Enterprise-8-PoE] Added support for configuring SNMP location and contact.
[US-G1][USW-Pro] Improved CPU usage on forwarding multicast streaming.

Bugfixes

Fixed the inability to return to the previous screen at port 9/10 status in the touchscreen.
Fixed clients need a long time to get an IPv6 address when Device Isolation (ACL) is enabled.
[USP-PDU-Pro] Fixed an issue where a different outlet could get power cycled when power cycling an outlet.
[USW-Enterprise-8-PoE] Fixed crash during packet processing when IP ACLs are configured.
[USW-Enterprise-8-PoE] Fixed DHCP Snooping configuration failure when LAG is configured.
[USW-Enterprise-8-PoE] Fixed an issue where the 2nd RADIUS server was not being used.
[USW-Enterprise-8-PoE] Fixed an issue where DHCP Guarding stops working after toggling the DHCP Snooping setting.
[USW-Pro-Max] Fixed the inability to adjust the Etherlighting color for the Native VLAN NONE.
[USW-Pro-Max] Fixed an issue where LAG didn't work after a reboot.
[USW-Pro-Max] Fixed an issue where the device gets an IP from the wrong VLAN.
[USW-Pro-Max] Fixed an issue where clients couldn't obtain an IP address from an L3 DHCP server when DHCP Snooping is disabled.
[USW-Aggregation] Fixed an issue where Loop Protection is not applied to LAG interfaces after a reboot.
[USW-48-PoE] Fixed an issue where Loop Protection didn't work properly.
[USW-48-PoE] Fixed manual speed setting on aggregation ports does not work.
[US-G1][USW-Pro] Fixed abnormal Tx drop counter increasing.
[US-48] Fixed mDNS traffic is not passing on some ports when IGMP Snooping is enabled.
[USW-PoE] Fixed SNMPv3 does not work if the password contains special characters.
[USW-PoE] Fixed the inability to authenticate with the RADIUS server if it contained special characters.
[USW-PoE] Fixed DNS queries using the same transaction ID for both IPv4 and IPv6 queries.
[USW-PoE] Fixed memory leak when using SNMP.

Additional information

Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade Touchscreen firmware.
Your device's Etherlighting ports may turn off for ~5 minutes after firmware upgrades to upgrade the Etherlighting firmware.

If you encounter any issues with this release, please provide us some details on your setup and include the below information: