Wurde wohl vergessen..... erledigt 👍
Beiträge von BlackSpy
-
-
Im 7.1 Zweig wird MLO (Added Multi-Link Operation (MLO) support) unterstützt, was in WiFi 7 der eigentliche mit Vorteil ist Mit MLO können sich WiFi 7 Clients an einen WiFi 7 AP mit unterschiedlichen Frequenz parallel verbinden, also zB im 6GHz und 2,4GHz Bereich und damit die Bandbreite erhöhen.
Warum Unifi dies so getrennt hat kann ich leider nicht beantworten und verstehe es auch nicht.
-
UniFi Talk Application 3.4.4
https://community.ui.com/releases/UniFi-Talk-Application-3-4-4/f39af5dc-2e7f-4109-ba4c-1782cd222a55
Overview
UniFi Talk Application update to version 3.4.4 is available.
Improvements
- Added ability to transfer parked calls after timeout.
- Added inbound number formatting setting for ATA
- Added timeout setting for simultaneous ring groups.
- Added ability to update SIP passwords for third-party devices.
- Implemented UI/UX improvements across the Talk application.
- Updated preconfigured templates for easybell.
Bugfixes
- Fixed issue that could prevent calls to Smart Attendants from being recorded.
- Fixed issue that could prevent the area code list from displaying correctly for installations in Canada.
- Fixed issue that could prevent deleted voicemail messages from disappearing.
- Fixed issue that could cause incorrect behavior in call recording rules after deleting a number
-
UniFi iOS 10.18.0 (101819)
https://community.ui.com/releases/UniFi-iOS-10-18-0-101819/f56be5c2-5712-479f-bec3-aac45d8d77b6
Overview
UniFi iOS 10.18.0 (101819) improves overall app performance, stability and device setup experience.
Improvements
- Improved "Pending Adoption" state handling.
- Updated and improved new Dashboard UI.
- Renamed "OS Settings" to "Control Plane".
- Updated "Control Plane" section.
- Removed IPS setting for non-supported devices.
- Disabled Guest, Isolate & Allow Internet Access toggles for Default network.
- Adjusted and aligned Settings row item heights.
Bugfixes
- Fixed issue with not being able to complete replace gateway.
- Fixed issue with wired experience showing no data.
- Fixed AP panel 6GHz banner redirect.
- Fixed issue with TX Retries being blank on device detail page.
- Fixed minor UI issue for iPhone 16 screen sizes.
Download links
-
UniFi Access Point 7.0.75
https://community.ui.com/releases/UniFi-Access-Point-7-0-75/59a75217-8fbe-4668-b2fa-e4bab07f9545
Improvements
- Improved Enhanced 2.4GHz IoT Connectivity mode.
- Improved TX Retries reporting.
Bugfixes
- Fixed incorrectly reported disconnect event during client roam.
- Fixed AP going offline problem when Network application was not reachable for some time.
Additional information
- Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
- If you wish to go back to the Official release after the upgrade, change the release channel back to Official.
If you encounter any issues with this release, please provide us with some details on your setup and include the below information:
- AP model(s)
- Previous AP release version
- UniFi Network application version
Download links
U6-Mesh-Pro | md5sum | sha256sum
U7-Pro/Wall/Max | md5sum | sha256sum
U7-Outdoor | md5sum | sha256sum
-
UniFi Android 10.19.2
https://community.ui.com/releases/UniFi-Android-10-19-2/2c4fba59-69cf-46f8-8853-368f42650564
Overview
UniFi Android 10.19.2 improves overall app performance, stability and device setup experience.
Improvements
- Updated "Meshing" in Radio Settings page.
- Updated Settings copy.
Bugfixes
- Fixed Standalone AP's model being parsed incorrectly.
- Fixed issue with UNVR not displayed under discovery although it's in reset state.
Download links
-
UniFi Access Intercom 1.4.10
https://community.ui.com/releases/UniFi-Access-Intercom-1-4-10/b599028f-5061-4cf4-9f6b-5ef7a169196f
Overview
UA-Intercom 1.4.10 includes the following improvements and bugfixes.
Improvements
- Support for Face Unlock (requires the Access application 2.4.5 or later).
- Support entering the Admin Mode (requires the Access application 2.4.5 or later).
- Admins with Full Management or Door Attendant permission can perform the following actions after tapping the upper-right icon and authenticating with their NFC card or PIN:
- Lock settings
- Set the unlock duration
- Temporarily lock a door
- Set the Emergency Mode (requires Full Management permission)
- General settings
- Adjust brightness (automatic or manual)
- Control volume
- Adjust text size
- View device information
Bugfixes
- Fixed an issue where a customized logo/background did not take effect.
- Fixed an issue causing the device to restart automatically.
- Fixed an issue where live feeds sometimes could not be viewed.
- Fixed an issue where the screen became stuck or responded slowly when Face Unlock was enabled for a while.
- Fixed an issue where door unlocking with Access credentials failed temporarily after the device restarted.
- Fixed an issue where the username was not broadcast after switching the display language in the UniFi Access application's Settings > General > Advanced > Access Reader > Access Reader Language.
Download links
-
UniFi Access G2 Reader Pro 1.7.9
Overview
UA-G2-Pro 1.7.9 includes the following improvements and bugfixes.
Improvements
- Improved the door unlock speed when the Anti-Spoofing Threshold is set to High in Settings > General > Security > Credentials > Face Unlock.
- Added a prompt for unanswered calls.
- Support entering the Admin Mode (requires the Access application 2.4.5 or later).
- Admins with Full Management or Door Attendant permission can perform the following actions after tapping the upper-middle icon and authenticating with their NFC card or PIN:
- Lock/unlock settings
- Set the unlock duration
- Temporarily lock a door
- Set the Emergency Mode (requires Full Management permission)
- Settings
- Adjust brightness (manual)
- Control volume
- View device information
Bugfixes
- Fixed an issue where live feeds sometimes could not be viewed.
- Fixed an issue where the screen became stuck or responded slowly when Face Unlock was enabled for a while.
- Fixed an issue where door unlocking with Access credentials failed temporarily after the device restarted.
- Fixed an issue where the username was not broadcast after switching the display language in the UniFi Access application's Settings > General > Advanced > Access Reader > Access Reader Language.
Download links
-
Security Advisory Bulletin 043 Unifi !!!!!
Overview
Published: October 16, 2024
Version: 1.0
Revision: 1.0
A Local privilege escalation vulnerability found in a Self-Hosted UniFi Network Server with UniFi Network Application (Version 8.4.62 and earlier) allows a malicious actor with a local system user to execute high privilege actions on UniFi Network Server.
Affected Products:
UniFi Network Application (Version 8.4.62 and earlier) .
Mitigation:
Update UniFi Network Application to Version 8.5.6 or later.
Impact:
CVSS v3.0 Severity and Metrics:
Base Score: 8.8 High
Vector:
CVSS: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
CVE: CVE-2024-42028
Reference Links:
-
UniFi OS - Cloud Keys 4.0.20
https://community.ui.com/releases/UniFi-OS-Cloud-Keys-4-0-20/6f10c9f2-b796-41b3-8806-6bfe83bbd183
Overview
UniFi OS 4.0.20 includes the improvement listed below.
Available Applications for the UCK-G2-Plus
- UniFi Network 8.3.32
- UniFi Protect
- UniFi Identity Enterprise
- UniFi InnerSpace
- UniFi Talk
- UniFi Access
- UniFi Connect
Available Applications for the UCK-G2
- UniFi Network 8.3.32
- UniFi Identity Enterprise
- UniFi InnerSpace
Available Applications for the UCK-Enterprise
- UniFi Network 8.3.32
- UniFi Identity Enterprise
- UniFi InnerSpace
Improvements
- Improved device stability.
Download links
-
UniFi Switch Ultra/Flex Mini 2.5G 2.0.5
Overview
UniFi Switch Ultra/Flex Mini 2.5G 2.0.5 includes the improvements listed below.
Improvements
- [USW-Ultra] Added support for STP.
- Improved device stability.
Download links
USW-Ultra/60W/210W | md5sum | sha256sum
USW-Flex-2.5G-5 | md5sum | sha256sum
-
UniFi Access Application 2.4.5
Overview
Access 2.4.5 includes the following improvements and bugfixes.
Improvements
- Support assigning non-admin users as receivers in Caller Manager, allowing them to answer doorbell calls via their Identity Endpoint for mobile.
- Requires UniFi OS 4.1.2 or later.
- Requires Identity Endpoint for mobile 1.1.7 or later.
- EAH-8 now supports License Plate Unlock.
- Intercom now supports Face Unlock (requires Intercom 1.4.9 or later).
- Support assigning license plate numbers to visitors, allowing them to unlock gates with their license plates.
- Optimized the Location performance.
- Access system logs are automatically stored on the HDD or microSD card if they are installed on the console (requires UniFi OS 4.1.2 or later).
Bugfixes
- Fixed an issue where the live view was sometimes inaccessible.
- Fixed a dark mode interface issue on the Policy page.
- Fixed an issue where the Emergency Trigger Level, once changed from NO to NC, could not be reverted to NO if no emergency device was connected to the Emergency terminal of the UA-Hub-Door or EAH-8.
-
Und weil es Spaß macht nach der 7.1 wieder ne 7.0🤔....naja passend zum IoT gedönse im neuen Beta Controller
UniFi Access Point 7.0.73 wurde zurückgezogen!!!!!!
https://community.ui.com/releases/UniFi-Access-Point-7-0-73/aa91657a-1df6-4fdb-813c-af9f603da5dc
Improvements
- Added Enhanced 2.4GHz IoT Connectivity mode (use UniFi Network application 8.6.3 or later).
Additional information
- Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
- If you wish to go back to the Official release after the upgrade, change the release channel back to Official.
If you encounter any issues with this release, please provide us with some details on your setup and include the below information:
- AP model(s)
- Previous AP release version
- UniFi Network application version
-
UniFi Network Application 8.6.3
Improvements
- Added the ability to filter the AP Density widget in the Dashboard by Radio Bands.
- Added French, Italian, and Portuguese as languages.
- Added Enhanced 2.4 GHz IoT Connectivity option in the WiFi settings.
- Improved connectivity for IoT devices.
- Requires firmware version 6.6.78 and 7.0.66 or newer.
- Added support for packet captures on WAN ports.
- Improved the latency for loading the Dashboard.
- Improved the user experience for the Dashboard.
- Improved the user search experience within Hotspot Manager.
- Improved searching within Settings.
- Improved feedback in Port Manager when a device exceeds the Tagged VLAN Management limits.
- Renamed AP Analyzer to Radio Manager and improved the user experience.
- Renamed RF Scanning to AirTime Scan and is now available under Radios > Environment.
- Updated validation for WiFi Settings when MLO is enabled. It now requires WPA3/WPA3 Enterprise.
- Updated VLAN limit to 500 for the EFG and UXG-Enterprise.
- Requires firmware version 4.1 or newer.
Bugfixes
- Fixed an issue where some devices didn't list their signal strength in the AP Meshing settings.
- Fixed Packet Capture issues for Access Points using MLO.
- Fixed ISP Speed Test History on setups with a PPPoE connection.
- Fixed the inability to set SFP28 ports with FEC configured to auto-negotiation.
Additional information
- Create a backup before upgrading your UniFi Network Application in the event any issues are encountered.
- See the UniFi Network Server Help Center article for more information on self-hosting a server.
- UniFi Network Application 7.5 and newer requires MongoDB 3.6 and Java 17.
- Version 7.5 till 8.0 supports up to MongoDB 4.4.
- Version 8.1 and newer supports up to MongoDB 7.0.
- UniFi Network Application updates may cause your adopted devices to be re-provisioned.
- Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu
UniFi Network Application for UniFi OS
UniFi Network Native Application for UniFi OS
UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***
-
Beta heute? Habe ich was verpasst?
-
Die 4.0.21 wurde soeben von Beta auf RC gestuft
-
UniFi OS - Enterprise Fortress Gateway 4.1.5
Overview
Bundled application
- UniFi Network 8.5.6
Improvements
- Added support for BGP (Broder Gateway Protocol).
- Added support for Directory Integration for Identity Standard, sync your users from Microsoft Entra ID, Active Directory, Google Secure LDAP, LDAP, or JumpCloud LDAP.
- Added support for uploading custom certificates to UniFi OS.
- Support for the Guest Portal is planned to be available in future releases.
- Added System Log events for unexpected shutdowns.
- Added disk warnings to the Updates tab in Control Plane.
- Added support for custom SMTP servers for notifications.
- Added support for NetFlow. Learn More
- Added support for Packet Captures. Learn More
- Added support for IPv6 Traffic Identification.
- Added support for showing IP addresses for Admin Changes in System Logs for remote connections.
- Added support for sending country restriction events to remote syslog servers.
- Support for Network Application System Logs will be available in a future Network Application release.
- Improved the device's system description for SNMP.
- Improved the setup user experience.
- Improved Shadow Mode resiliency and setup experience.
- Improved efficiency for configuration changes.
- Improved Remote Access and backup restore resiliency.
- Improved setup resiliency when NTP servers are unavailable.
- Improved system stability.
- Improved DNS Shield resiliency.
- Improved WAN resiliency when RAs are not available in the DHCPv6 environment.
- Improved Shadow Mode.
- Updated Traffic Identification signatures.
- Renamed UniFi OS Settings to UniFi OS Control plane, previously only visible via Site Manager.
Bugfixes
- Fixed incorrect FAN and Temperature reporting via SNMP.
- Fixed log spam due to multipath routes.
- Fixed the inability to download backups when Remote Access is disabled.
- Fixed an issue where users with UniFi OS permissions couldn't see System Logs.
- Fixed an issue where SNMP didn't respond to IPv6 requests.
- Fixed a DNS server issue that could result in delayed DHCP responses.
Download links
-
UniFi OS - Cloud Keys 4.1.5
https://community.ui.com/releases/UniFi-OS-Cloud-Keys-4-1-5/3e50e322-759d-4d48-9fe0-f6ec1f4c8969
Overview
Available Applications for the UCK-G2-Plus
- UniFi Network 8.5.6
- UniFi Protect
- UniFi Identity Enterprise
- UniFi InnerSpace
- UniFi Talk
- UniFi Access
- UniFi Connect
Available Applications for the UCK-G2
- UniFi Network 8.5.6
- UniFi Identity Enterprise
- UniFi InnerSpace
Available Applications for the UCK-Enterprise
- UniFi Network 8.5.6
- UniFi Identity Enterprise
- UniFi InnerSpace
Improvements
- Added support for Directory Integration for Identity Standard, sync your users from Microsoft Entra ID, Active Directory, Google Secure LDAP, LDAP, or JumpCloud LDAP.
- Added support for uploading custom certificates to UniFi OS.
- Support for the Guest Portal is planned to be available in future releases.
- Added support for custom SMTP servers for notifications.
- Added support for SNMP.
- Added System Log events for unexpected shutdowns.
- Added disk warnings to the Updates tab in Control Plane.
- Added support for Camera Sharing through the Identity app.
- Added support for showing IP addresses for Admin Changes in System Logs for remote connections.
- Improved Remote Access and backup restore resiliency.
- Improved system stability.
- Improved the user experience when restoring backups.
- Improved the setup user experience.
- Renamed UniFi OS Settings to UniFi OS Control plane, previously only visible via Site Manager.
Bugfixes
- Fixed the inability to download backups when Remote Access is disabled.
- Fixed an issue where users with UniFi OS permissions couldn't see System Logs.
- [UCK-Enterprise] Fixed port speed setting issues for the SFP port.
Download links
-
UniFi OS - Dream Router 4.1.5
https://community.ui.com/releases/UniFi-OS-Dream-Router-4-1-5/dc5b6898-054d-4a51-b446-098cd3e7bdb2
Overview
Bundled application
- UniFi Network 8.5.6
Improvements
- Added support for Directory Integration for Identity Standard, sync your users from Microsoft Entra ID, Active Directory, Google Secure LDAP, LDAP, or JumpCloud LDAP.
- Added support for uploading custom certificates to UniFi OS.
- Support for the Guest Portal is planned to be available in future releases.
- Added support for custom SMTP servers for notifications.
- Added System Log events for unexpected shutdowns.
- Added support for Packet Captures. Learn More
- Added support for Hotspot 2.0/PassPoint.
- Added support for IPv6 Traffic Identification.
- Added support for showing IP addresses for Admin Changes in System Logs for remote connections.
- Added support for sending country restriction events to remote syslog servers.
- Support for Network Application System Logs will be available in a future Network Application release.
- Added disk warnings to the Updates tab in Control Plane.
- Added support for Camera Sharing through the Identity app.
- Improved the user experience when restoring backups.
- Improved the device's system description for SNMP.
- Improved the setup user experience.
- Improved Remote Access and backup restore resiliency.
- Improved performance.
- Improved setup resiliency when NTP servers are unavailable.
- Improved DNS Shield resiliency.
- Improved WAN resiliency when RAs are not available in the DHCPv6 environment.
- Updated Traffic Identification signatures.
- Renamed UniFi OS Settings to UniFi OS Control plane, previously only visible via Site Manager.
Bugfixes
- Fixed incorrect FAN and Temperature reporting via SNMP.
- Fixed log spam due to multipath routes.
- Fixed the inability to download backups when Remote Access is disabled.
- Fixed an issue where SNMP didn't respond to IPv6 requests.
- Fixed a DNS server issue that could result in delayed DHCP responses.
- Fixed an issue where users with UniFi OS permissions couldn't see System Logs.
Download links
-
UniFi OS - Cloud Gateways 4.1.5
https://community.ui.com/releases/UniFi-OS-Cloud-Gateways-4-1-5/79a5e2ad-487f-405e-97f0-76b313627c55
Overview
Bundled application
- UniFi Network 8.5.6
Improvements
- Added support for Directory Integration for Identity Standard, sync your users from Microsoft Entra ID, Active Directory, Google Secure LDAP, LDAP, or JumpCloud LDAP.
- Added support for uploading custom certificates to UniFi OS.
- Support for the Guest Portal is planned to be available in future releases.
- Added support for custom SMTP servers for notifications.
- Added support for SNMP.
- Added System Log events for unexpected shutdowns.
- Added support for Identity Enterprise.
- Added support for Packet Captures. Learn More
- Added support for NetFlow. Learn More
- Added support for IPv6 Traffic Identification.
- Added support for showing IP addresses for Admin Changes in System Logs for remote connections.
- Added support for sending country restriction events to remote syslog servers.
- Support for Network Application System Logs will be available in a future Network Application release.
- Added disk warnings to the Updates tab in Control Plane.
- Added support for Camera Sharing through the Identity app.
- Improved the user experience when restoring backups.
- Improved the device's system description for SNMP.
- Improved the setup user experience.
- Improved efficiency for configuration changes.
- Improved Remote Access and backup restore resiliency.
- Improved setup resiliency when NTP servers are unavailable.
- Improved system stability.
- Improved performance.
- Improved DNS Shield resiliency.
- Improved WAN resiliency when RAs are not available in the DHCPv6 environment.
- Updated Traffic Identification signatures.
- Renamed UniFi OS Settings to UniFi OS Control plane, previously only visible via Site Manager.
Bugfixes
- Fixed incorrect FAN and Temperature reporting via SNMP.
- Fixed log spam due to multipath routes.
- Fixed the inability to download backups when Remote Access is disabled.
- Fixed an issue where users with UniFi OS permissions couldn't see System Logs.
- Fixed an issue where SNMP didn't respond to IPv6 requests.
- Fixed a DNS server issue that could result in delayed DHCP responses.
Download links
