Beta UniFi Protect Application 1.x.x

**lycra** · 15. November 2021

Installiert

**BlackSpy** · 17. November 2021

UniFi Protect Application 1.20.0-beta.10

https://community.ui.com/relea…dc-45ae-809d-f4130c9a01b0

Overview

To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

UDM-Pro 1.10.4

UDM-Pro-SE 2.2.4

UDR 2.2.12

UNVR / UNVR PRO 1.4.9

UCK-G2-PLUS 2.1.11

To use this version, we recommend using following mobile app versions (or newer):

Protect Android 1.4.7

Protect iOS 1.5.6

Bugfixes:

Fix for application crash when going to custom notifications.

Fix for issue where interface shows incorrect count of notifications.

Fix incorrect camera limit warning for UNVR-Pro.

Floodlight: Fix disconnected caused by the failure to send the light event triggered by the paired camera motion event.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

**lycra** · 17. November 2021

Erledigt

Danke

**BlackSpy** · 3. Dezember 2021

UniFi Protect Application 1.20.1

https://community.ui.com/relea…c1-43cd-986b-81e8dbc8fbed

Overview

To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

UDM-Pro 1.10.4

UDM-Pro-SE 2.2.4

UDR 2.2.12

UNVR / UNVR PRO 1.4.9

UCK-G2-PLUS 2.1.11

To use this version, we recommend using following mobile app versions (or newer):

Protect Android 1.4.7

Protect iOS 1.5.6

Improvements:

Improve wireless camera adoption resilience.

Show AC Voltage warning when the Doorbell is underpowered.

Bugfixes:

Fix issue where a camera could get stuck in the "Managed by Another Console" state after being unmanaged.

Fix issue where location-based notifications are not sent.

Fix issue where Doorbell Ring notification stopped working in some rare cases.

Fix issue where a UP-Sense stayed disconnected after a connected Access Point was factory reset.

Web UI: Fix notification schedule time selector to allow 15 minute intervals.

Web UI: Fix crashes on iOS safari browser.

Web UI: Fix issue where G2 Pro live playback was not working.

G4-Doorbell: Fix ghost/random chime activation issue.

Additional information:

Please report any issues you encounter with this release using the Report Bug form.

**jkasten** · 3. Dezember 2021

Und wieder kein Fix für das Geofencing Problem unter IOS

**gierig** · 4. Dezember 2021

Dorbell Klingel Notification nun mit Bild...das gab es bei mir vorher nur über eine HomeBridge integration und deren Notifications...

**BlackSpy** · 20. Dezember 2021

UniFi Protect Application 1.21.0-beta.1

https://community.ui.com/relea…4a-4f11-ae40-41f7c94aee90

Overview

To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

UDM-Pro 1.10.4
UDM-Pro-SE 2.2.4
UDR 2.2.12
UNVR / UNVR PRO 1.4.9
UCK-G2-PLUS 2.1.11

Improvements

Add notifications for Floodlights and Smart Sensors.
Consolidate Application update into 1 event.
Web UI: Add icons to recent access widget on the dashboard.
Web UI: Add "Gallery view" to timelapse.
Web UI: Add Smart detection analytics.
Web UI: Improve video quality selection.
Web UI: Improve how events are merged in the timeline.
Web UI: Improve timelapse scrubbing experience around detections.
Web UI: Option to have the same AI-360 camera in multiple live slots with different dewarping modes
Web UI: Update device tile design.
Web UI: Show colored icons when notification is enabled.
Web UI: Show dates in the detections gallery view.
Web UI: Show event log for Floodlight & Smart Sensor.
Web UI: Show warning for bad wifi on wireless cameras.
Web UI: Show available recording parts in timelapse.
Web UI: Show in timelapse, when recording mode was changed
Web UI: Show Audio levels in the Playback page.

Bugfixes

Fix "Managed by Another Console" status after unmanaging a camera.
Fix incorrectly estimated storage capacity.
Web UI: Fix focus position not appearing when changing autofocus.
Web UI: Fix issue where the Bluetooth connection strength was shown when the device was offline.
Web UI: Add option to view WiFi password when changing SSID for WiFi Camera.
Web UI: Fix dead-end when deleting recording schedule.
Web UI: Fix recording schedules display of which days are being recorded
Web UI: Fix column visibility filter in the device list.
Web UI: Fix livestream freeze when taking snapshots.
Web UI: Fix some settings not clickable on smaller screens.
Web UI: Hide unavailable settings for devices when they're offline.
Web UI: Show correct Bluetooth device host IP address.
G4-PTZ: Fix click-to-move malfunction.
G3-Instant/G4-Instant: Fix issue where bitrate would not auto-adjust when watching live streams.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

**lycra** · 20. Dezember 2021

INstalliert

Danke

**BlackSpy** · 27. Dezember 2021

UniFi Protect Application 1.21.0-beta.2

https://community.ui.com/releases/UniFi-Protect-Application-1-21-0-beta-2/5ff88416-bd2e-4241-84bf-0f279a9e3d91

Overview

To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

UDM-Pro 1.10.4
UDM-Pro-SE 2.2.4
UDR 2.2.12
UNVR / UNVR PRO 1.4.9
UCK-G2-PLUS 2.1.11

Improvements

G4-Doorbell: Alleviate random/ghost chime and device suddenly reboot when user press ring button.

Additional information

Please report any issues you encounter with this release using the Report Bug form

**lycra** · 28. Dezember 2021

Installiert und nicht zufrieden.

Protect application crashed mehrfach am Tag...

Das kommt bei meinen 3x g3 instant in der timeline. Und das seit dem Update täglich mehrfach..

Also Achtung, falls ihr noch nicht das Upgrade vollzogen haben.

**lycra** · 29. Dezember 2021

Moin,

Zitat

Hello @lycra88,

Please attach /srv/unifi-protect/video/2021/12/27/74ACB90BFB1D_2_rotating_1640607762276.ubv from the console to your thread as private file.

soll ich nun als privates files derm Support schicken.

Wie komme ich daran? nur via SSH nehme ich an?

Kann mir jemand sagen welche Befehle ich da nutzen muss?

**BlackSpy** · 29. Dezember 2021

Ich würde es über SSH und WinScp machen.

WinScp runterladen und starten, deine SSH Anmelde Daten eingeben Passwort ist immer "root". Protokoll bei ner UDM Pro ist "SCP".

Könnte sein das rechts das Fenster nur einen Ordner enthält, auf den Ordner eine ebene höher und danach durchhangeln

**lycra** · 29. Dezember 2021

Zitat
Hello @lycra88,

Grab it via SCP from a workstation.
Code
scp [email protected]:/srv/unifi-protect/video/2021/12/27/74ACB90BFB1D_2_rotating_1640607762276.ubv c:\users\%username%\desktop

Ok wurde grad auch dort so hintelregt.

nun muss ich aber erstmal auf ipv6 bei mir zu Hause von der FIrma drauf kommen

Oder aber bis ich zu Hause bin warten

ich habe bei mir in der Firma auch ipv6 ausgestellt, bzw der ITler der uns alles eingerichtet hat... Ihc sprech mal mit ihm, ob man das ändern kann

**BlackSpy** · 29. Dezember 2021

Sollte dein Smartphone Provider IPV6 unterstützen und du hast nen VPN Zugang zu hause kannst du auch zB, unter Android, Termux nutzen.

WLAN aus und unter Mobilfunk rein

**lycra** · 29. Dezember 2021

Mein Smartphone Provider (Telekom) kann ipv6, aber im Büro kein Emfpang, bin immer nur im Wlan drin für Wlan Call etc ALso Flugmodus an und Wlan an

VPN Zugang hab ich zu hause auch noch nicht eingerichtet. Muss ich mir nochmal durchlesen, also auf der Synology NAS oder auf der UDM pro. Mal schauen was besser ist

Zitat von BlackSpy

Ich würde es über SSH und WinScp machen.

Ich hab übrigens noch FlashFXP (uralte Version mit Lizenz) Hab gesehen kann ich auch SSH sogar machen

**lycra** · 29. Dezember 2021

Ok mit WINSCP connected, aber leider kommt eine fehlermeldung.

Hab es mal im Forum gepostet, mal schauen was der Support sagt.

Es geht hier einfach nicht weiter.

**BlackSpy** · 11. Januar 2022

UniFi Protect Application 1.21.0-beta.3

https://community.ui.com/releases/UniFi-Protect-Application-1-21-0-beta-3/32c7bb7a-697d-4841-8b9f-eef49b8682e9

Overview

To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

UDM-Pro 1.10.4
UDM-Pro-SE 2.2.4
UDR 2.2.12
UNVR / UNVR PRO 1.4.9
UCK-G2-PLUS 2.1.11

Improvements

Add low battery notifications for the UP-Sense.
Improve timelapse event descriptions
Improve doorbell ring notification delivery speed.
Include Floodlight / Sensor disconnects in "Connection Changes" notification.
Web UI: Add new sensor notifications.
Web UI: Add the ability to control the floodlight LED to the camera live view.
Web UI: Improve UX of audio levels in timelapse.
Wireless Camera: Improve WiFi connection stability.
G3-Pro: Improve auto-focus upon day/night switch.
G4-Dome: Improve MIC input audio quality.
G4-Instant: Improve image quality on both day and night mode.
AI-360: Improve audio quality.

Bugfixes

Fix issue where wireless device IP is not removed after the device is unmanaged.
Fix issue where restarting cameras would show an error.
Fix rare application crashes.
Fix issue where after pressing "Pending Adoption" on the device page, the camera gets disconnected
Fix issue where video recording could not be downloaded in rare cases.
Web UI: Fix setting focus point in full screen.
Web UI: Fix issue where dewarping for AI-360 camera did not work properly.
Web UI: Improve audio in live view maximized slots.
Web UI: Fix issue where next/previous buttons were reversed.
Web UI: Fix page crash for new users.
Web UI: Fix issue where it would show "off" in recording schedules while enabled for that specific day.
Cameras: Fix overlay issue when a device has a name with a single character.
Cameras: Improve device reaction to DHCP subnet changes.
G3-Instant: Fix issue where 50HZ image setting gets set back to 60HZ after restarting the camera.
G4-Doorbell: Improve day/night switching.
G4-Instant: Fix issue where motion detection stops working.

**lycra** · 11. Januar 2022

Installiert

**gierig** · 12. Januar 2022

G4-Doorbell: Improve day/night switching.

Darauf bin ich gespannt..

Wobei ich seit x Versionen ein 3 Sekunden Delay zum Mechanischen Gong habe der auch ein wenig nervt...

**BlackSpy** · 26. Januar 2022

UniFi Protect Application 1.21.0-beta.5

https://community.ui.com/releases/UniFi-Protect-Application-1-21-0-beta-5/826ef821-2d29-4f66-b66b-2bc827a05a99

Overview

To upgrade to this version of UniFi Protect, you will need one of the following firmware versions (or newer):

UDM-Pro 1.10.4
UDM-Pro-SE 2.2.4
UDR 2.2.12
UNVR / UNVR PRO 1.4.9
UCK-G2-PLUS 2.1.11

Improvements

Improve "Storage Utilization" information if no SD card is inserted on the UDR console.
Improve Doorbell Ring notification delivery speed.
Wireless Cameras: Improve connection stability.
Web UI: Improve camera selection in the Playback section.
Web UI: Pop out event thumbnail in the timeline when scrubbing.
Web UI: Enable low battery notifications for IoT devices.
AI-Bullet: Improve audio quality on far end pick up.
G4-Doorbell-Pro: Enable the package camera light at night time for 15 seconds when live viewing the camera.

Bugfixes

Fix issue where notification for hard disk failure is not sent.
Fix issue where notifications are turned off in rare cases.
Fix rare application crash.
Fix issue where un-managing cameras causes application restarts.
Fix issue where the camera does not always record when it's scheduled to record in rare cases.
Web UI: Allow to pair only adopted cameras to DoorLock.
Web UI: Add Earliest Recording date on hover over in Dashboard.
Web UI: Fix issue where "(C)" overlaps Safe Zone in UP-Sense property panel.
Web UI: Fix full-screen mode not preserving when switching between live views.
Web UI: Fix issue where new user roles couldn't be saved.
AI-360: Addresses stuttering playback.
AI-360: Swap dewarp zoom scroll direction.
Cameras: Fix issues were timezones cause issues.
G4-PTZ: Fix issue where camera last position is not returned after device reboot.

Known issues

Android: Users will receive 2 notifications for Doorbell Ring events.

Additional information

Please report any issues you encounter with this release using the Report Bug form

Willkommen! Melden Sie sich an oder registrieren Sie sich.

Beta UniFi Protect Application 1.x.x

UniFi Protect Application 1.21.0-beta.1

Overview

Improvements

Bugfixes

Additional information

UniFi Protect Application 1.21.0-beta.2

Overview

Improvements

Additional information

UniFi Protect Application 1.21.0-beta.3

Overview

Improvements

Bugfixes

UniFi Protect Application 1.21.0-beta.5

Overview

Improvements

Bugfixes

Known issues

Additional information

Ähnliche Themen

UCK-G2 und G2+ FW Post

Beta Protect 1.18.0 - 1

Beta NVR FW 1.4.7

10 Benutzer haben hier geschrieben

Wer ist war online

Benutzer online 91

Wer war online 181