Beta UniFi Network Application 7.2.xx

Es gibt 52 Antworten in diesem Thema, welches 20.466 mal aufgerufen wurde. Der letzte Beitrag () ist von iTweek.

    Remote Access aktiviert?

    Zitat von Jack

    Ich meine ja aber wo ist das in der neuen Oberfläche? Wenn ich über den UI-Account gehe wird mit das Auswahlfeld angezeigt.

    Das findest du unter System im Unifi OS

    Du musst dich lokal, mit deinem UI Account an deiner Kiste anmelden. Welche Version hast du denn vom Unifi OS installiert?

    Kein Ding, Hauptsache es geht nun :grinning_face_with_smiling_eyes:

    Danke 1
    Zitat von jkasten

    Der Menüpunkt VPN lässt seit dieser Version die App crashen... Scheint bei vielen so zu sein. Kann das jemand von euch bestätigen. Neue Gui und da unter Einstellungen auf VPN.

    Jupp. Nicht in der App, aber kann ich so in Safari auf dem iPad bestätigen:


    Gefällt mir 1
    Zitat von Saimon71

    Jupp. Nicht in der App, aber kann ich so in Safari auf dem iPad bestätigen:


    Ja genau das meine ich. Ich hab gestern mal den Teleport Client gelöscht und dann ist das wieder erreichbar. Aber sobald man einen Link generiert und der Client sich einmal verbindet ist wieder vorbei. Abwarten, ist ja bekannt das Problem. Ich nutze den VPN eh nicht, war nur schön als Backup falls der Wireguard mal ausfallen sollte.

    Heute habe ich die Backup-Leitung auf den Port 8 umgestellt und kann damit einen SFP+ Port freigeben und braucht keinen Strom mehr. Hat problemlos geklappt.

    UniFi Network Application 7.2.87

    https://community.ui.com/releases/UniFi-Network-Application-7-2-87/29245b66-dcf2-4832-bd53-69e7c7d9929f



    Improvements

    • Add an error message when deleting a Network that's referred by WiFi network.
    • Improve backup restore process when restoring backup from different console models.
    • Remove internal "Inter-VLAN routing" network after migrating L3 network back to Gateway.
    • Provide actionable feedback when user tries to import console backup(*.unifi) into Network Application.
    • Display Traffic Rule Rate Limiting only when the console supports it.


    Bugfixes

    • Fix issue where device adoption takes long time.
    • Fix issue where the device is not removed from AP Exclusions in Nightly Channel Optimization when forgotten.
    • Fix issue where enabling Jumbo Frames on UDR caused configuration error.
    • Fix issue where Guest Hotspot image is missing after backup restore.
    • Fix issue where user cannot update global AP and switch settings after moving excluded device to a different site.
    • Fix unable to edit Nightly Channels Optimization settings.
    • Fix issue where WiFi Global Settings cannot be edited.
    • Fix issue where WAN Load Balance settings failed to apply.
    • Fix issue where Active APs widget displayed reversed traffic.
    • Fix UDM provisioning error when default Radius server configuration is invalid.
    • Fix issue where cross-app auto-link adoption feature failed when no WiFi configured for AP.
    • Fix DHCP offset time field failing to save.
    • Fix various issues in Port Management section.
    • Fix issue where Teleport VPN page crashed.
    • Fix issue where user cannot open Port Management from Topology page.
    • Fix missing bandwidth profiles in clients panel when accessing page directly.


    Additional information

    Please report any issues you encounter with this release using the Report Bug form.

    (Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.

    • Existing UniFi Network Applications must be on one of the following versions in order to upgrade directly to this version:


    UniFi Network Application updates may cause your adopted devices to reprovision.An updated/current version of Java 8 must be installed on the system hosting the UniFi Network Application. Java 9 and later are not yet supported.As of UniFi Network Application version 5.9, if using Cloud Access, the host system/device requires outbound 8883/tcp to be open/unrestricted. Find up-to-date port requirements here.Minimum supported device firmware for U6-Series devices is 5.29.0, UAP/USW is 4.0.9, and for USG it's 4.4.34.If you have any 'service dns forwarding options' configuration defined in config.gateway.json, it will overwrite the provisioning of statically defined name servers, leaving you with no DNS. Either remove the 'service dns forwarding options' portion of config.gateway.json, or add additional 'options' lines defining name servers, such as 'server=1.1.1.1', 'server=8.8.8.8', etc.

    Microsoft Windows specific Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.

    macOS Specific We stopped bundling Java as of UniFi Network 5.11.47. If you're installing that release or later please make sure you have manually installed a current release of Java 8 beforehand. Only the Java Runtime Environment (JRE) is required.Oracle JRE 8 offers the simplest path as it will simply "just work" without requiring any changes. We may investigate alternative JVMs and update this message accordingly.

    Debian/Ubuntu specific For Debian/Ubuntu users installing via our repo, please update your APT source (see HERE).We support MongoDB 3.6 since 5.13.10, older UniFi Network Application versions only support up to MongoDB 3.4.

    Checksums

    Code
    a82dd522ddf8dad9747ea500d3c10cc8 *UniFi-installer.exe@@@WCF_PRE_LINEBREAK@@@53bb25d7b8c8f148ae9e95eb3e4fe64a *UniFi.pkg@@@WCF_PRE_LINEBREAK@@@b0f855bdf147cf500e4210618fd0ae5c *UniFi.unix.zip@@@WCF_PRE_LINEBREAK@@@70b111466f33baa98f84728afe5c4059 *unifi_sysvinit_all.deb@@@WCF_PRE_LINEBREAK@@@601df32736f41e40a80a3e472450a3e1 *unifi_sh_api@@@WCF_PRE_LINEBREAK@@@@@@WCF_PRE_LINEBREAK@@@


    Download links

    UniFi Network Application for Windows

    UniFi Network Application for macOS

    UniFi Network Application for Debian/Ubuntu and UniFi Cloud Key

    UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***

    unifi_sh_api (shell library)


    Gefällt mir 1

    DAnke, installiert

    UniFi Network Application 7.2.88

    https://community.ui.com/releases/UniFi-Network-Application-7-2-88/43ea8429-552f-42d0-800f-3f7dc1ae43df



    Improvements

    • Remove Override Inform Host field for cloud console.


    Bugfixes

    • Fix rare gateway configuration error related to incorrect RADIUS profile.
    • Fix inform process exception when discovered device is missing model and version.
    • Fix standalone application startup hanging because of missing Mongo client.
    • Fix issue where Lock AP feature is missing for UniFi Devices.
    • Fix issue where the Settings page crash when adopting an AP.


    Additional information

    Please report any issues you encounter with this release using the Report Bug form.

    (Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.

    • Existing UniFi Network Applications must be on one of the following versions in order to upgrade directly to this version:


    UniFi Network Application updates may cause your adopted devices to reprovision.An updated/current version of Java 8 must be installed on the system hosting the UniFi Network Application. Java 9 and later are not yet supported.As of UniFi Network Application version 5.9, if using Cloud Access, the host system/device requires outbound 8883/tcp to be open/unrestricted. Find up-to-date port requirements here.Minimum supported device firmware for U6-Series devices is 5.29.0, UAP/USW is 4.0.9, and for USG it's 4.4.34.If you have any 'service dns forwarding options' configuration defined in config.gateway.json, it will overwrite the provisioning of statically defined name servers, leaving you with no DNS. Either remove the 'service dns forwarding options' portion of config.gateway.json, or add additional 'options' lines defining name servers, such as 'server=1.1.1.1', 'server=8.8.8.8', etc.

    Microsoft Windows specific Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.

    macOS Specific We stopped bundling Java as of UniFi Network 5.11.47. If you're installing that release or later please make sure you have manually installed a current release of Java 8 beforehand. Only the Java Runtime Environment (JRE) is required.Oracle JRE 8 offers the simplest path as it will simply "just work" without requiring any changes. We may investigate alternative JVMs and update this message accordingly.

    Debian/Ubuntu specific For Debian/Ubuntu users installing via our repo, please update your APT source (see HERE).We support MongoDB 3.6 since 5.13.10, older UniFi Network Application versions only support up to MongoDB 3.4.

    Checksums

    Code
    f94652b43c4d3d7713bd311043aa91da *UniFi-installer.exe@@@WCF_PRE_LINEBREAK@@@b18457d05a5b996c1999789018fc471f *UniFi.pkg@@@WCF_PRE_LINEBREAK@@@6bcba7906fcee3455bfaeae57e61721b *UniFi.unix.zip@@@WCF_PRE_LINEBREAK@@@303e3c49283d03c19baf9fa8ba04324b *unifi_sysvinit_all.deb@@@WCF_PRE_LINEBREAK@@@601df32736f41e40a80a3e472450a3e1 *unifi_sh_api@@@WCF_PRE_LINEBREAK@@@@@@WCF_PRE_LINEBREAK@@@

    Download links

    UniFi Network Application for Windows

    UniFi Network Application for macOS

    UniFi Network Application for Debian/Ubuntu and UniFi Cloud Key

    UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***

    unifi_sh_api (shell library)


    Danke 1 Gefällt mir 1

    Danke auch installiert :winking_face:

    UniFi Network Application 7.2.91

    https://community.ui.com/releases/UniFi-Network-Application-7-2-91/6f078b6c-8665-41f4-83f1-07069667805d



    Bugfixes

    • Fix issue where settings on a Cloud Console cannot be changed.
    • Fix gateway configuration error if a Traffic Route with a unknown or unsupported network is used.
    • Fix issue where Network Application can be interrupted during the backup restore process.
    • Fix the issue where Admin Access logs page in the cloud console were empty.


    Additional information

    Please report any issues you encounter with this release using the Report Bug form.

    (Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.

    • Existing UniFi Network Applications must be on one of the following versions in order to upgrade directly to this version:


    UniFi Network Application updates may cause your adopted devices to reprovision.An updated/current version of Java 8 must be installed on the system hosting the UniFi Network Application. Java 9 and later are not yet supported.As of UniFi Network Application version 5.9, if using Cloud Access, the host system/device requires outbound 8883/tcp to be open/unrestricted. Find up-to-date port requirements here.Minimum supported device firmware for U6-Series devices is 5.29.0, UAP/USW is 4.0.9, and for USG it's 4.4.34.If you have any 'service dns forwarding options' configuration defined in config.gateway.json, it will overwrite the provisioning of statically defined name servers, leaving you with no DNS. Either remove the 'service dns forwarding options' portion of config.gateway.json, or add additional 'options' lines defining name servers, such as 'server=1.1.1.1', 'server=8.8.8.8', etc.

    Microsoft Windows specific Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.

    macOS Specific We stopped bundling Java as of UniFi Network 5.11.47. If you're installing that release or later please make sure you have manually installed a current release of Java 8 beforehand. Only the Java Runtime Environment (JRE) is required.Oracle JRE 8 offers the simplest path as it will simply "just work" without requiring any changes. We may investigate alternative JVMs and update this message accordingly.

    Debian/Ubuntu specific For Debian/Ubuntu users installing via our repo, please update your APT source (see HERE).We support MongoDB 3.6 since 5.13.10, older UniFi Network Application versions only support up to MongoDB 3.4.

    Checksums

    Code
    98a1b8a752c7c84c4fba046997bd745c *UniFi-installer.exe@@@WCF_PRE_LINEBREAK@@@b85cefbeffe9414b69dd05e3ffd3c028 *UniFi.pkg@@@WCF_PRE_LINEBREAK@@@edfebb2fbf84f517109cf0efe0108d90 *UniFi.unix.zip@@@WCF_PRE_LINEBREAK@@@6bdf4f2a0f7554edc5fea6f613d08886 *unifi_sysvinit_all.deb@@@WCF_PRE_LINEBREAK@@@601df32736f41e40a80a3e472450a3e1 *unifi_sh_api@@@WCF_PRE_LINEBREAK@@@

    Download links

    UniFi Network Application for Windows

    UniFi Network Application for macOS

    UniFi Network Application for Debian/Ubuntu and UniFi Cloud Key

    UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***

    unifi_sh_api (shell library)


    Danke 2 Gefällt mir 1

    Ebenefalls bereits ohne Probleme installiert.

    Die 7.2.91 ist jetzt RC Kandidat


    Hier das Change Log, Link siehe oben


    Improvements

    • Add Local DNS Record support for Clients.
    • Add Internet Automatic Speed Test settings.
    • Add tooltip for long names in settings tables.
    • Add tooltip for “FE” and “E” internet speeds.
    • Add toasts for Site Export/Import actions.
    • Add Global Network and Switch Settings.
    • Add internet health section in the dashboard.
    • Add Teleport Clients overview to Teleport VPN settings.
    • Add Wan IP to the gateway overview side panel.
    • Add a timezone field for Cloud Consoles.
    • Add WiFi Network column to Clients page.
    • Add Region matching to Traffic Routes. (requires 2.5.x/1.13.x FW)
    • Add OpenVPN client support. (requires 2.5.x/1.13.x FW)
    • Add the warning copy for disabling "New Device Auto-Link".
    • Add WiFi Performance section.
    • Add the gateway IP to USW settings automatically(if DHCP server exists).
    • Add Connectivity Monitor setting.
    • Add Speed Limit for Traffic Rules. (requires 2.5.x/1.13.x FW)
    • Add notification about Gateway configuration commit error.
    • Add Warning about WiFi's need to be provision and clients may lose connectivity when editing Wifi settings.
    • Add Antenna Gain value for UAP-AC-M.
    • Add an error message when deleting a Network that's referred by WiFi network.
    • Improve system stability.
    • Improve backup restore process when restoring backup from different console models.
    • Improve reliability of WAN failover events. (requires 2.5.x/1.13.x FW)
    • Improve search field when names contain dashes.
    • Improve dashboard widget spacing.
    • Improve Port insights UX.
    • Improve Traffic Overview UX.
    • Improve validation for Group Rekey field.
    • Allow migrating network to L3 switch.
    • Set legacy support and beacon rate based on the selected min data rate.
    • Provide actionable feedback when user tries to import console backup(*.unifi) into Network Application.
    • Disable restricted fields for UID WiFi.
    • Display Minimum Rate information under 2.4 GHz Rates.
    • Show Last Seen time for offline devices in Uptime column.
    • Set default value for MinRSSI to -80 dBm.
    • Remove Override Inform Host field for cloud console.
    • Replace JSVC with systemd for process management for self-hosted linux.

    Bugfixes

    • Fix gateway configuration error if a Traffic Route with an unknown or unsupported network is used.
    • Fix an issue where the Admin Access logs page was empty for Cloud Consoles.
    • Fix rare gateway configuration error related to incorrect RADIUS profile.
    • Fix inform process exception when discovered device is missing model and version.
    • Fix issue where the Settings page crash when adopting an AP.
    • Fix issue where SNAT does not work for additional public IPs with PPPoE.
    • Fix VPN Server subnet size options.
    • Fix issue where PoE mode was not editable for PoE capable WAN ports.
    • Fix UI Verify Push login doesn't work when accessing through unifi.ui.com.
    • Fix issue with Internet VLAN ID 0 and QoS Tag.
    • Fix issue where custom DHCP lease time is not applied to the DHCP server running on L3 USW.
    • Fix issue where Traffic Overview was showing initial range 1 week.
    • Fix tagged networks not showing properly on switch ports profile "All".
    • Fix issue where the internet stopped working after adopting UXG-Pro using advanced adoption.
    • Fix an issue where the UXG-Pro outlet list doesn't show the outlet name and status.
    • Fix issue with validating channels on 5 GHz and 6 GHz bands.
    • Fix issue with VLAN ID value validation in Internet settings.
    • Fix issue where excluded APs would stay listed after forgetting an AP.
    • Fix rare issues where wireless uplinked AP is not provisioned correctly.
    • Fix issue where WiFi security changes when turning on the 6GHz band.
    • Fix issue with Outlets for USW-Mission-Critical.
    • Disable dropdowns when the port profile is read-only.