Mache das jetzt mal gesondert.

Hier nur die Protect welche Minimum OS 3 vorraus setzt

UniFi Protect Application 2.7.31

https://community.ui.com/releases/UniFi-Protect-Application-2-7-31/2cd31564-d3b2-4b3c-aeff-004b76fa7677

Overview

This version requires you to have UniFi OS version 3.0 or newer.

Improvements

• Improved quality switching in the live view page.
• Updated the camera firmware version to 4.63.20
• G4 Models: Fixed day/night switch does not work all the time.
• G4-Dome: Fixed LDC malfunction
• G4-Doorbell-Pro: Improved firmware upgrade progress.
• G5-Pro: Improved AF stability.
• G5-Pro/Bullet/Dome/Flex: Fixed privacy zones disappear after a camera reboot or power cycle.
• G5-Pro/Bullet/Dome/Flex: Fixed streaming issues due to faulty adaptive bitrate control.
• Renamed Motion Sensitivity to Motion Intensity.
• Updated the description of "Connecting is taking longer than expected".

Bugfixes

• Fixed missing default FloodLight name when adopting the device.
• Fixed double sounds for doorbell ring notifications on iOS.
• Fixed partly missing text for the UP-Sense mounting instructions.
• Fixed an issue where you might see incorrect times/dates on the detections page.
• Fixed an issue where playback might be stuck.
• Fixed an issue where devices might get stuck in the "Preparing update" state.
• Fixed an issue where you might see incorrect thumbnails for detections.
• Fixed an issue where the live view does not work after restoring a backup file.
• Fixed an issue where the live view might not work after restoring a backup.
• Fixed an issue that resulted in incorrect Smart Detection counters.
• Fixed an issue that caused the application to crash in rare cases.

Known issues

• Sharing live streams does not work when using a browser on an iOS mobile device.

UniFi Protect Application 2.7.33

https://community.ui.com/releases/UniFi-Protect-Application-2-7-33/f45884dc-869d-4b89-b7bd-91c564487c77

Overview

This version requires you to have UniFi OS version 3.0 or newer.

Improvements

• Updated the camera firmware version to 4.63.21
• AI-Bullet/Theta/DSLR: Fixed license plate detection.

Bugfixes

• Fixed an issue where users might be unable to view the live feed on Viewport.
• Fixed an issue where devices might get stuck in the "Updating" state.
• Fixed an issue where wireless devices might get stuck in the "Adopting" state.

Known issues

• Sharing live streams does not work when using a browser on an iOS mobile device.

UniFi Protect Application 2.7.34

https://community.ui.com/releases/UniFi-Protect-Application-2-7-34/614ea121-9e87-44c0-b265-440b93bc3ef4

Improvements

• Updated the camera firmware version to 4.63.22
• [Wireless Cameras] Improved connectivity resiliency.

Bugfixes

• Fixed incorrect images when UNVRs are stacked.
• Fixed a rare application crash.
• Fixed unable to load live streams on viewports if you had Honeypots configured.
• Fixed an issue where System Logs for Sensor adoption were missing.
• Fixed an issue where System Logs for Chime removal were missing.
• Fixed deleting logic for recording schedule management.
• Fixed missing NVR related events in the timelapse view.
• [G5-Bullet/Dome/Flex] Fixed random disconnection issue.

Known issues

• Sharing live streams does not work when using a browser on an iOS mobile device.

Additional information

This version requires you to have UniFi OS version 3.0 or newer.

UniFi Protect Application 2.8.14

https://community.ui.com/releases/UniFi-Protect-Application-2-8-14/5f69cb43-aa90-458d-8302-6454908a54b6

Improvements

• Added "Global Recording Settings" for cameras.
• Added camera capacity on the dashboard.
• Added "when to record" column in the devices list.
• Added live view objective tracking for AI camera models.
• Added responsive UX for the dashboard.
• Improve BLE device adoption experience when having multiple UniFi Host.
• Added IP Address/Port/Uptime to the dashboard.
• Migrated user/role management to the UniFi OS level.
• Added email notifications and system log for battery issues on G4 Doorbell.
• Improve application resiliency in cases of storage failure or unexpected shutdowns.
• Improved camera auto-adoption stability.
• Improved the camera player window UX.
• Improve Display options for Device list and System log sections.
• Improved system log messaging.
• Updated the camera firmware version to v4.64.66.
• Updated the Viewport firmware version to v1.2.70.
• Updated the Chime firmware version to v1.3.7.
• [G4-Doorbell-Pro]: Improved the time it takes to apply image settings.
• [G4-Doorbell-Pro]: Improved audio quality when using double talk.
• [G4-Doorbell-(Pro)]: Improved logic for battery health checks.
• [G5-Dome]: Improved audio quality.
• [G5-Pro]: Improved Auto Focus stability.
• [G5-Pro/AI series]: Improved image quality performance.
• [G5-Bullet/Dome/Flex]: Improved image quality.
• [G5-Series/G3-Instant/G4-Instant]: Added support for adding polygon privacy zones.
• [AI-Series/G3/4-Instant/G5-Series]: Improved low-light performance.
• [Viewport] Improved stability while streaming multiple cameras.
• 2-Way Audio: Improved 2-way audio latency.
• SmartVideo/SmartAudio: Improved detection and live view.
• Smart Detect/Smart Audio: Updated package detection model for better accuracy.
• Wireless Camera: Improved connectivity resiliency.

Stackable NVR

• Added the ability to move cameras between the parent/child NVRs.
• Added an NVR column in the devices list that lists which NVR manages the camera.
• Improved Stackable UNVR initialization setup flow.

Bugfixes

• Fixed inaccurate WiFi signal level colors.
• Fixed delayed update of cycle mode and interval in the live view editor.
• Fixed unable to cancel adding new live views.
• Fixed inaccurate dates/times for some detections.
• Fixed the timelapse table sorting after changing the camera.
• Fixed inaccurate total time for "door open" events in UP-sense.
• Fixed player pop-out for live view might be blank after a mouse click on Safari.
• Fixed the Sensor side panel might not show activities in rare cases.
• Fixed custom roles might go missing after restarting/upgrading the application.
• Fixed unable to download timelapse clips that are 600x and 30 seconds long.
• Fixed broken layout from Safari after exiting from the full camera screen.
• Fixed unable to click on zoom-in/out buttons on the Playback page.
• Fixed push notifications for package detections are not sent.
• Fixed a rare ViewPort adoption issue.
• Fixed missing custom rules issue on stackable consoles.
• Fixed a rare recording loss issue on new setup consoles.
• Fixed UP-Chime might fail to update due to insufficient memory. Please reboot the unit if you're experiencing update issues.
• Removed Presets and Reset keyboard controls for the AI360.

Cameras

• [G3-Flex]: Fixed an issue that might cause low video quality due to faulty streaming adaptive bitrate control.
• [G4-Instant]: Fixed audio performance degradation.
• [G4-Pro]: Fixed an issue that might cause the image to flip accidentally.
• [G4-Doorbell-Pro]: Fixed a device reboot issue while a user was in 2-way audio mode already and then pressed the button.
• [G4-PTZ]: Fixed loss focus when HDR toggling.
• [G5-Pro]: Fixed av-sync issue due to PTS drifting.
• [G5-Pro]: Fixed IR-Cut Filter On/Off is not correctly performed.
• [G5-Pro]: Fixed Low Quality and event thumbnail low-quality issue.
• [AI-DSLR]: Fixed thumbnail flip/mirror mismatch.
• [AI-Series]: Fixed load wrong AWB params.
• [AI-Series/G3,4-Instant/G5-Series]: Fixed HDR hunting under flat light sources.
• 2-way Audio: Fixed an issue that might cause talkback malfunction.

Known issues

• Sharing live streams does not work when using a browser on an iOS mobile device.

Additional information

This version requires you to have UniFi OS version 3.0 or newer.

Scheint sehr viele Fehler zu haben.

Im UI sind viele wieder zurück auf die alte Version

apt-get install --reinstall --allow-downgrades unifi-protect=2.7.34 -y

UniFi Protect Application 2.8.15

https://community.ui.com/releases/UniFi-Protect-Application-2-8-15/7d48601f-bb28-41f4-a5e8-3bb8a4d40968

Improvements

• Updated the camera firmware version to v4.64.68.

Bugfixes

• Fixed an issue that caused loading issues on the dashboard.
• Fixed application crash during startup.
• Fixed rare application crash when recycling recordings.
• Fixed incorrect Camera Lost Power events on the playback page.
• Fixed unable to see any devices as console owner.
• Fixed unable to adopt Viewport in rare cases.
• [Wireless Cameras] Fixed AP selection does not work as expected.

Known issues

• Sharing live streams does not work when using a browser on an iOS mobile device.

Additional information

This version requires you to have UniFi OS version 3.0 or newer.

UniFi Protect Application 2.8.22

https://community.ui.com/releases/UniFi-Protect-Application-2-8-22/00007ab9-2682-484c-8f3a-1847ba657090

Improvements

• Added a capacity tooltip when hovering the bar in the dashboard.
• Updated the behavior of the Previous and Next event buttons.
• Updated Viewport firmware version to v1.2.72.
• Updated camera firmware version to v4.64.105.
• [G4-Doorbell-Pro] Added support for downloading clips from the Package camera.
• [G4-Doorbell-Pro] Added support for enabling path light when viewing the package camera.
• [G4-Doorbell/Pro] Improved battery health-checking logic when the ambient temperature gets warmer.
• [G4-PTZ] Added support for auto-tracking of people.
• [G4-PTZ] Support more presets and home view features.
• [G5-Pro/Flex/Bullet] Improved audio quality.
• [G5-Pro/AI-Pro] Improved autofocus.
• [G5-Series/G4-Instan/AI-Series] Improved image quality.
• [Wireless Cameras] Improved firmware update resiliency.

Bugfixes

• Fixed missing clarification for Chime disabled notifications.
• Fixed incorrect snapshots for the G4-Doorbell-Pro package camera.
• Fixed devices getting stuck in the "Preparing Update" state.
• Fixed incorrect status of Bridge devices.
• Fixed "spec-device" custom roles that are missing after updating.
• Fixed incorrect storage information on the NVRs Touchscreen.
• Fixed missing CO/Smoke alarm events on the detections page.
• [G3-Micro] Fixed camera going offline when switching between SSIDs with incorrect passwords.
• [G4-Pro/Dome/Bullet/Doorbell(-Pro)] Fixed contrast adjusting malfunctioning.
• [G5-Pro] Fixed IR-Cut Filter On/Off malfunctioning in rare cases.
• [G5-Pro] Fixed unable to handle 30FPS on complex scenes.
• [Wireless Cameras] Fixed unable to adopt devices via Bluetooth in rare cases.

Stackable NVR

• Fixed unable to assign "Device Specific" permissions on stacked NVRs
• Fixed "Global Camera Settings" not getting applied to cameras that are managed by child consoles.

Known issues

• PTZ Presets don't work on Android. This will be fixed in the next Protect release.
• Sharing live streams does not work when using a browser on an iOS mobile device.
• Unable to create a system config backup via the UniFi OS on stacked console setups. This will be fixed in the next Protect release.
• Unable to update the Protect application on the Child console. This will be fixed in UniFi OS 3.1.9 and newer.

Additional information

This version requires you to have UniFi OS version 3.0 or newer.

UniFi Protect Application 2.8.25

https://community.ui.com/releases/UniFi-Protect-Application-2-8-25/5114ba4e-3607-458f-a680-f7f760977ea9

Improvements

• Added support for the "Select All" checkbox on the Playback and Detections page.
• Added support for turning on lights on FloodLight during smart detection occurrences
• Improved thumbnail loading on the dashboard.
• Improved pop-out player position on small screens
• Improved loading time of live streams.
• Improved loading latency of ongoing detection events.
• Updated camera firmware version to v4.64.119
• Updated Chime firmware version to v1.4.0
• Consolidated frequent logs in the system logs.
• [G4-PTZ] Improved losing focus when enabling Auto tracking
• [UP-Chime] Improved update time estimation

Bugfixes

• Fixed incorrect timelapse export size estimates.
• Fixed inaccurate timezone in snapshot filenames.
• Fixed live detections are not displayed when using a direct connection.
• Fixed incorrect tab icon size on the detections page.
• Fixed bitrate rounding in the camera property panel.
• Fixed Smart Detection section isn't appearing after a camera is adopted.
• Fixed unable to create custom roles on the UniFi OS admins page in rare cases.
• Fixed a rare application crash.
• [AI-Series][G5-Series] Fixed unable to switch day/night view in some scenarios.
• [G4-Doorbell-Pro] Fixed mic does not work in some rare cases.
• [G4-Doorbell-Pro] Fixed unable to download package camera video while using a direct connection.
• [G4-PTZ] Fixed "PTZ preset" functionality on Android.
• [UP-Chime] Fixed unable to connect to different Access Points.

Stackable NVR

• Fixed unable to create a system config backup via the UniFi OS on stacked console setups.

Known issues

• Sharing live streams does not work when using a browser on an iOS mobile device.
• Unable to update the Protect application on the Child console. This will be fixed in UniFi OS 3.1.9 and newer.

Additional information

This version requires you to have UniFi OS version 3.0 or newer.

UniFi Protect Application 2.8.26

https://community.ui.com/releases/UniFi-Protect-Application-2-8-26/881b2063-11dc-4db4-af1f-3f62562733d8

Improvements

• Updated camera firmware version to version 4.64.144.
• [Doorbell-Pro] Improved stability when using a PoE adapter.
• [G4-Pro/G5-Pro] Improved Auto Focus.

Bugfixes

• Fixed rare cases where "Camera Lost Power" appears unexpectedly on the playback page.
• Fixed unable to adjust notification settings when a custom schedule is configured.
• [Doorbell Models] Fixed Welcome screen not appearing when detecting approaching persons.
• [G4-PTZ] Fixed rare Smart Detection issue that causes Auto Tracking to stop working.

Known issues

• Sharing live streams does not work when using a browser on an iOS mobile device.

Additional information

This version requires you to have UniFi OS version 3.0 or newer.

UniFi Protect Application 2.8.27

https://community.ui.com/releases/UniFi-Protect-Application-2-8-27/e4d2a53f-2341-49fa-b663-f1cde28bf172

Bugfixes

• Fixed permission migration issues when using custom roles. A complete fix will be available when UniFi OS 3.1.11 or newer is available. For users affected by this, please re-create your custom roles.
• Fixed incorrect snapshots in detection notifications.
• Fixed incorrect file names for ongoing events.
• Fixed Home View might appear when pressing the Enter/Return key on the Camera Name field for G4-PTZ.

Known issues

• Sharing live streams does not work when using a browser on an iOS mobile device.

Additional information

This version requires you to have UniFi OS version 3.0 or newer.