ist das neu ??????

UniFi Access Reader G2 Mini 3.9.10

https://community.ui.com/releases/UniFi…77-69eb891b778e

Bugfixes

Door Unlock

• Fixed an issue where doors sometimes could not be unlocked using NFC cards.
• Fixed an issue where doors sometimes could not be unlocked by improving the authentication process.

Gibt es weder im Shop noch auf EA ?????

UniFi Access Reader G2 3.9.14.0

https://community.ui.com/releases/UniFi…ac-a1f852a33adc

Improvements

Others

• UA G2 Mini is now called UA G2.

Bugfixes

Door Unlock

• Fixed the issue where doors sometimes could not be unlocked after a device upgrade.

UniFi Access Reader G2 3.9.21.0

https://community.ui.com/releases/UniFi…87-21ac8a05fbb7

Improvements

• Optimized the performance of unlocking doors using cards linked to Android mobile wallets.
• Enhanced the sensitivity of the Hand Wave door access method.
• The reader will use the default indication sound if the Greeting Message is disabled.

Bugfixes

• Fixed the issue where the reader went offline during VLAN switching.
• Fixed the issue where the reader’s LED light turned red following a successful access attempt.
• Fixed the issue where the reader did not indicate unlock failures while using cards linked to the HCE mobile wallet.

UniFi Access Reader G2 3.10.0.0

https://community.ui.com/releases/UniFi…d1-97ad4b025809

Bugfixes

• Fixed the issue where the LED blinked red and no indication sound was played after a successful door unlocking event. This occasionally occurred in v3.9.14.0 or later.
• [Identity Enterprise] Fixed the issue where a door could still be unlocked using mobile access methods through Bluetooth even if they have been disabled.

UniFi Access Reader G2 3.11.6.0

https://community.ui.com/releases/UniFi…ac-7fcc55826e7b

Improvements

• G2 Reader now flashes a green LED during an emergency evacuation.
• Support broadcasting greeting messages when a door is unlocked remotely via hand wave, NFC card, the Identity Enterprise mobile app, or UniFi Identity Endpoint. Available in Settings > Advanced of the Access application and mobile app.
• The Access application can now discover G2 Readers that are not connected to Access Control Hubs.
• Support manually downgrading G2 Readers to lower versions.
• Broadcast “No Permission” when door unlock fails.
• Improved door-opening resilience.

Bugfixes

• Fixed the issue where Hand Wave unlock required a closer distance (approximately 3.5cm) to sense door opening.
• Fixed an occasional issue where G2 Reader did not emit a sound and activate the LED upon unsuccessful door unlocking attempts.
• Fixed potential adoption failure issues.
• Fixed the issue where G2 Readers did not appear in the Access application when using a public network segment as the device IP segment.

Download links

UA-G2

UniFi Access Reader G2 3.11.10.0

https://community.ui.com/releases/UniFi…74-a1c2f4cced4f

Overview

UA-G2 3.11.10.0 includes the following improvements and bugfixes.

Improvements

• Optimized Mobile Tap’s distance detection to unlock only at close range when the proximity is set to “Near.”

Bugfixes

• Fixed an issue where NFC card swipes experienced a delay in response.
• Fixed an issue where there was no sound feedback for hand waves when the greeting sound was disabled.

Download links

UA G2

UniFi Access Reader G2 3.12.9.0

https://community.ui.com/releases/UniFi…36-e8113e17b983

Overview

UA-G2 3.12.9.0 includes the following improvements and bugfixes.

Improvements

• Optimized Mobile Tap's distance detection to unlock only at close range when the proximity is set to "Near."
• Optimized the Mobile Unlock speed and stability. Requirements:
• Access 2.3.10 or later
• UniFi Identity Endpoint
• iOS: 1.1.3 or later
• Android: 1.1.4 or later
• Identity Enterprise app
• iOS: 0.78.5 or later
• Android: 0.79.1 or later

Bugfixes

• Fixed an issue where NFC card swipes experienced a delay in response.
• Fixed an issue where locations couldn't be unlocked using Mobile Unlock.
• Fixed an issue where there was no sound feedback for hand waves when the greeting sound was disabled.

Download links

UA G2

UniFi Access G2 Reader 3.13.17.0

https://community.ui.com/releases/UniFi…97-58f2ddcb6071

Overview

UA-G2 3.13.17.0 includes the following improvements and bugfixes.

Improvements

• Improved the door unlock stability.
• Enhanced the Mobile Tap experience.
• Requires the latest iOS mobile app version to allow door unlocking from a locked iPhone:
• Identity Endpoint app for iOS 1.2.0 or later
• Identity Enterprise app for iOS 0.82.1 or later
• Requires the latest Android mobile app version to ensure optimal Mobile Tap experience:
• Identity Endpoint app for Android 1.2.0 or later
• Identity Enterprise app for Android 0.82.1 or later

Bugfixes

• Fixed an issue where door unlocking with Access credentials failed temporarily after the device restarted.

Download links

UA-G2

UniFi Access G2 Reader 3.13.19.0

https://community.ui.com/releases/UniFi…72-6f9fb47fd562

Overview

UA-G2 3.13.19.0 includes the following improvements.

Improvements

• Improved the door unlock stability.

Download links

UA-G2

UniFi Access G2 Reader 3.14.3

https://community.ui.com/releases/UniFi…90-626efde7d0fb

Overview

UniFi Access G2 Reader 3.14.3 includes the following bugfixes.

Bugfixes

• Fixed an issue where the reader sometimes automatically restarted, even when only the UniFi Console was restarted.

Download links

UA-G2

UniFi Access G2 Reader 3.16.3

https://community.ui.com/releases/UniFi-Access-G2-Reader-3-16-3/1e9b68e4-78d4-481f-b5c3-7f5ad6f1ac0d

Überblick

UniFi Access G2 Reader 3.16.3 enthält die folgenden Fehlerbehebungen.

Bugfixes

• Es wurde ein Problem behoben, bei dem neu registrierte UA-Karten und UA-Taschen manchmal keine Türen öffnen konnten, wenn die Option „NFC-Karten von Drittanbietern“ deaktiviert war.
• Es wurde ein Problem behoben, bei dem die Registrierung von NFC-Karten manchmal fehlschlug, wenn das Gerät an einen Switch angeschlossen war.

Weitere Informationen

Wenn bei dieser Version Probleme auftreten, stellen Sie uns bitte die neueste Supportdatei unter Site Manager > UniFi-Konsole > Zugriff > Geräte > UA G2 > Einstellungen > Supportdatei herunterladen zur Verfügung .

Download-Links

UA G2

UniFi Access G2 Reader 3.16.5

https://community.ui.com/releases/UniFi-Access-G2-Reader-3-16-5/5ca24cd2-fd6c-4848-bd57-a579207a7729

Overview

UniFi Access G2 Reader 3.16.5 includes the following bugfixes.

Bugfixes

• Fixed an issue where door unlock failures were not recorded in the System Log.
• Fixed an issue where the device might not respond when unlocking the door with credentials.

Additional information

If you encounter any issues with this release, please provide us with the latest support file at Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

Download links

UA G2

UniFi Access G2 Reader 3.16.8

https://community.ui.com/releases/UniFi-Access-G2-Reader-3-16-8/80569bf9-202e-4654-a36d-0aaf0aadd08d

Overview

UniFi Access G2 Reader 3.16.8 includes the following bugfixes.

Bugfixes

• Fixed an issue where doors sometimes failed to unlock due to an Out Of Memory error.

Additional information

If you encounter any issues with this release, please provide us with the latest support file at Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

Download links

UA G2

UniFi Access G2 Reader 3.17.7

https://community.ui.com/releases/UniFi-Access-G2-Reader-3-17-7/a7858442-51fa-44bd-884a-13cab4390f8d

Overview

UniFi Access G2 Reader 3.17.7 includes the following improvements.

Improvements

• Improved device performance.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

Download links

UA G2

UniFi Access G2 Reader 3.17.9.0

https://community.ui.com/releases/UniFi-Access-G2-Reader-3-17-9-0/c02bb7e7-6a3e-4967-a34f-83b406619594

Overview

UniFi Access G2 Reader 3.17.9.0 includes the following bugfixes.

Bugfixes

• Fixed a potential issue where doors could not be unlocked.
• Fixed a potential issue where “No Permission” was incorrectly prompted when using handwave to unlock the door.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

Download links

UA G2

UniFi Access G2 Reader 3.17.11.0

https://community.ui.com/releases/UniFi-Access-G2-Reader-3-17-11-0/9787633a-9eb1-49b0-a80a-24bcc832fcc0

Overview

UniFi Access G2 Reader 3.17.11.0 includes the following improvements.

Improvements

• Optimized device performance.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

Download links

UA G2

UniFi Access G2 Reader 3.18.11

https://community.ui.com/releases/UniFi-Access-G2-Reader-3-18-11/41b5f4e5-b1f8-4f9d-9383-45fee6ca2434

Overview

UniFi Access G2 Reader 3.18.11 includes the following improvements.

Improvements

• Optimized LED and sound behavior.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

Download links

UA G2