Solange ipv6 nicht aus irgendwelchen Gründen notwendig wird,
wenn du Matter einsetzten willst..dann brauchst du ipv6
Um schreiben oder kommentieren zu können, benötigen Sie ein Benutzerkonto.
Sie haben schon ein Benutzerkonto? Melden Sie sich hier an.
Jetzt anmeldenHier können Sie ein neues Benutzerkonto erstellen.
Neues Benutzerkonto erstellenEs gibt 56 Antworten in diesem Thema, welches 13.253 mal aufgerufen wurde. Der letzte Beitrag () ist von BlackSpy.
Solange ipv6 nicht aus irgendwelchen Gründen notwendig wird,
wenn du Matter einsetzten willst..dann brauchst du ipv6
Das stimmt. Lokal benutze ich ipv6 deshalb auch.
UniFi Network Application 8.0.24 adds support for Admin Settings Change Logs, increases the network limit to 255, and includes several stability fixes and improvements.
Admin Settings Change Logs
Allows you to track all settings changes and who performed the changes.
UniFi Network Native Application for UniFi OS
A specific application version that is only compatible with the UDM and UDR (running UniFi OS 3.1.6 or newer).
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu
UniFi Network Application for UniFi OS
UniFi Network Native Application for UniFi OS
UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***
Moin in die Runde,
ich habe gestern morgen auch von Network 8.0.7 auf Netowrk 8.0.24 ein "Upgrade" gemacht. Für mich wirkt das anhand der Versionsnummer mehr als ein Downgroad...
Auch habe ich ein Update der Firmware von der UDM SE gemacht, auf UniFi OS 3.2.7. Seit dem wird mir die UDM SE als Offline angezeigt.
Ich habe keine Informationen über meine Anschlüsse im Internet Tab der UDM sowie die Traffic Rules funktionieren auch nicht.
Habt ihr bekannte Probleme damit auch wahrgenommen? Leider habe ich vergessen ein Backup der alten Version zu machen und kann dementsprechend jetzt nicht zurück gehen...
Danke für Eure Antworten!
Grüße aus Bremen,
Nico
Hallo Nico, neustart hilft auch nicht ?
Nein wenn du den Unifi.ui.com Remotelogin Aktiv hast erstellt er ja Automatisch Backups.
Hallo Nico, neustart hilft auch nicht ?
Nein wenn du den Unifi.ui.com Remotelogin Aktiv hast erstellt er ja Automatisch Backups.
Moin,
ein Neustart hilft auch nicht...
Der Remotelogin ist an, ja. Es wird mir dort auch ein Backup angeboten, aber ich weiß leider nicht welcher Version das ist...
Da sollten doch mehrere Backups sein, je nachdem wie lange die schon lief ... und das Datum steht doch dabei.
Ist aber doch nicht schlimm kann ja nur 1 Monat oder 1 Woche max alt sein. Wenn du nicht viel geändert hast einfach aufspielen und nochmal das update machen es geht dabei ja nicht Kaputt
Habe jetzt ein Backup von letzter Woche eingespielt.
Die UDM SE Firmeware ist gleich geblieben, nur die Netzwerk Firmware ist wieder bei 8.0.24 und es scheint auf den ersten Blick wieder alles zu funktionieren...
Ein Update wird mit für Netzwerk aktuell nicht angeboten.
8.0.24 ist ja auch aktuell.
Genau 8.0.24 > 8.0.7 letzte stelle ist eine 24 und nicht 2.4 im Vergleich zu 7.0
(Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.
8.0.26 and earlier 8.0.x versions.
7.5.187 and earlier 7.5.x versions.
7.4.162 and earlier 7.4.x versions.
7.3.84 and earlier 7.3.x versions.
7.2.97 and earlier 7.2.x versions.
7.1.68 and earlier 7.1.x versions.
7.0.26 and earlier 7.0.x versions.
6.5.55 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.
Alles anzeigen
UniFi Network Application updates may cause your adopted devices to be re-provisioned.The UC-CK is not supported as of Network application version 7.3 and newer.UniFi Network Application 7.5 or newer requires MongoDB 3.6 (up to 4.4) and Java 17.
Native Application for UniFi OS specific This is only compatible with the UDM/UDR that run UniFi OS 3.1.6 or newer, don't attempt to install it on any other consoles. Older UniFi OS versions on the UDM/UDR use the regular UniFi OS Network application.
Microsoft Windows specific (when running it as a service) Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.
Debian/Ubuntu/Linux specific For Debian/Ubuntu users installing via our repo, please update your APT source (see HERE).We support MongoDB 3.6 since 5.13.10, older UniFi Network Application versions only support up to MongoDB 3.4.The UniFi Network application requires Java 17 to be installed on the system that runs the application. Java 18 and later are not supported.
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu
UniFi Network Application for UniFi OS
UniFi Network Native Application for UniFi OS
UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***
UniFi Network Application 8.0.28 includes the bugfixes listed below.
UniFi Network Native Application for UniFi OS
A specific application version that is only compatible with the UDM, UDR and Express (running UniFi OS 3.1.6 or newer).
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu
UniFi Network Application for UniFi OS
UniFi Network Native Application for UniFi OS
UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***
UniFi Network Application 8.1.113 adds support for Network Viewer, NAT Pooling, L3 Network Isolation (ACL), Device Isolation (ACL), OSPF Dynamic Routing, and improves the Topology experience by allowing to rotate it.
Network Viewer
Detailed overview of the entire network allowing you to see everything in one place.
NAT Pool
Adds the ability to NAT traffic to a pool of addresses on specific networks.
Addition of custom Source and Destination NAT rules is scheduled for an upcoming release.
L3 Network Isolation and Device Isolation (ACL)
Control traffic on your network using Access-Lists (ACLs) on UniFi Switches.
Addition of custom Access Lists is scheduled for an upcoming release.
Topology Rotation
Rotate your topology horizontally for a better overview on wide screen displays.
OSPF Dynamic Routing Protocol
Enable OSPF on Virtual Networks to form neighbor connections with other gateways and exchange routes.
Addition of the BGP Dynamic Routing Protocol is scheduled for an upcoming release.
InnerSpace
A powerful deployment visualization tool that allows you to view your UniFi system's WiFi coverage in your own floor plan.
Firewall
IPv6
VPN
WiFi
Switching
Client and Device pages
UniFi Network Native Application for UniFi OS
A specific application version that is only compatible with the UDM, UDR, Express and UCG-Ultra (running UniFi OS 3.1.6 or newer).
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu
UniFi Network Application for UniFi OS
UniFi Network Native Application for UniFi OS
UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***
UniFi Network Application 8.1.127 enhances Firewall Rules visibility and adds tunnel IP addresses and OSPF dynamic routing support for IPsec Site-to-Site VPNs.
Firewall
UniFi Network Native Application for UniFi OS
A specific application version that is only compatible with the UDM, UDR, Express and UCG-Ultra (running UniFi OS 3.1.6 or newer).
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu
UniFi Network Application for UniFi OS
UniFi Network Native Application for UniFi OS
UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***
UniFi Network Application 8.2.93 adds support for ACL Rules, DNS Records, Multi-Link Operation (MLO), BGP, and the Inspection page.
Inspection
View blocked and suspicious traffic on a single screen.
The inspection page will be expanded to show more types of traffic in upcoming releases.
ACL Rules
Control traffic inside or between networks using access lists on UniFi Switches.
The addition of IPv6 Access Lists is scheduled for a future release.
DNS Records
Create different types of DNS records that can be resolved by devices.
CNAME, NXDOMAIN, and PTR records will be added in future releases.
UniFi Network Native Application for UniFi OS
A specific application version that is only compatible with the UDM, UDR, Express and UCG-Ultra (running UniFi OS 3.1.6 or newer).
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu
UniFi Network Application for UniFi OS
UniFi Network Native Application for UniFi OS
UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***
Bei den DNS Records: was macht man mit MX, TXT und Srv einträgen oder besser was bewirken sie?
Bei den DNS Records: was macht man mit MX, TXT und Srv einträgen oder besser was bewirken sie?
Könnte man sich dann damit einen Reverse Proxy machen und nginx Proxy sparen?
Bei den DNS Records: was macht man mit MX, TXT und Srv einträgen oder besser was bewirken sie?
Hauptsächlich E-Mail Geschichten. Hab Mal aus Interesse mein eigenen Mail-Server konfiguriert, da musste man die konfigurieren.
Generell wüsste ich nicht wozu man die in der Unifi Application setzen sollte.
A und AAAA sind allerdings cool, aber ich hab schon Pi-Hole mit Unbound, da mache ich das schon selbst.
zur Zeit sind 69 Mitglieder (davon 1 unsichtbar) und 760 Gäste online - Rekord: 129 Benutzer ()