hab nicht weiter geforscht.. ist mir zu mühsam.. bin wieder zurück auf die alte version
Beta UAP 6.x.xx
Es gibt 137 Antworten in diesem Thema, welches 39.388 mal aufgerufen wurde. Der letzte Beitrag () ist von BlackSpy.
-
-
UAP Firmware 6.0.10
https://community.ui.com/releases/UAP-Firmware-6-0-10/5776206d-cce7-4ee4-8198-ac6177e43056
Improvements
- [UAP-Gen2] Improve stability.
Bugfixes
- [UAP-Gen2/Gen3/Gen6] Fix issue where 5GHz WLANs don't come up when going from a wireless uplink to wired uplink.
- [U6-LR] Fix no 5GHz neighbors listed.
- [U6-Lite] Fix a memory leak.
- [UAP-Gen4/Gen5] Fix false radar detections in some cases.
- [UAP-Gen3] Fix bootloop introduced in 6.0.8 and improve overall stability.
- [UAP-Gen2] Fix DHCP issues with Proxy ARP enabled.
- [UAP] Fix issues with unlocking a client from an AP.
- [UAP] Fix division by zero error, potentially leading to slow and unreliable connections.
Additional information
Please report any issues you encounter with this release using the Report Bug form.
- U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
- Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
- Please refer to this article to find more details on how to identify your Access Point generation.
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
- All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).
Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:
- Application version.
- Firmware version (previous and current).
- Device model(s).
-
Installiert, bislang keine Probleme
-
Ist seit heute Morgen ohne erkennbare Fehler installiert.
-
Habe es auf ein paar AC-Lite installiert, nach einer Zeit, gingen die Pings sehr hoch ca 3Sek. Musste zurückrudern auf die Stable 5.43.
Habe die APs aber im Moment im Mesh per WLAN, da die Verkabelung noch nicht fertig ist.
-
läuft besser
-
Ich kann das Problem von Surfer bestätigen, hatte mal zu testen auf einen Sender gespielt der im Mesh ist.
Nach ca. 2 Stunden extrem hohe Pingzeiten, musste schnell alles wieder zurück drehen.
-
Wie genau äussert sich das für Euch?
-
Das gesamte Wlan wurde immer langsamer, im Lan alles ok.
-
UAP Firmware 6.0.11
https://community.ui.com/releases/UAP-Firmware-6-0-11/0cf5cb5d-d308-43da-8117-9efed5f2b3c5
Overview
* This release is only for the following model(s):
- U6-Pro/Mesh/IW/Extender
Users of wireless uplinked APs can upgrade from 6.0.10 by running the following on their wireless uplinked AP’s via SSH/debug terminal.
Codecurl https://dl.ui.com/unifi/firmware/UAP6MP/6.0.11.13600/BZ.ipq50xx_6.0.11+13600.220128.0058.bin -o /tmp/fwupdate.bin && fwupdate.real -m &
In case your AP got stuck, please power cycle the access point and then run the command mentioned above via SSH/debug terminal.
Please let us know if you have any trouble with upgrading from 6.0.10, especially in the case of wirelessly uplinked APs.
Bugfixes
- [UAP-Gen6] Fix not being able to update AP firmware through Network Application when the AP is wirelessly uplinked.
Additional information
Please report any issues you encounter with this release using the Report Bug form.
- U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
- Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
- Please refer to this article to find more details on how to identify your Access Point generation.
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
- All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).
-
Gleich installiert
-
Läuft bisher ohne Probleme
-
UAP Firmware 6.0.12
https://community.ui.com/releases/UAP-Firmware-6-0-12/9fd5a488-2f47-499e-a817-1e9b5392e8f9
Improvements
- [UAP-Gen4/Gen5] Improve overall stability.
Bugfixes
- [UAP-Gen4/Gen5] Fix wrong transmission power being used when manually set to custom value.
- [UAP-Gen4/Gen5] Fix DFS radar false positives on non-DFS channels causing overall 5GHz instability, introduced in 6.0.8.
Additional information
Please report any issues you encounter with this release using the Report Bug form.
- U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
- Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
- Please refer to this article to find more details on how to identify your Access Point generation.
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
- All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).
-
Installiert
-
UAP Firmware 6.0.13
https://community.ui.com/releases/UAP-Firmware-6-0-13/5546dbe0-ba33-449a-85e4-52774a5dc272
Improvements
- [UAP-Gen3] Improve Wireless Uplink stability.
- [UAP-Gen4/Gen5] Improve compatibility with 2.4GHz IoT devices.
- [U-LTE/U-LTE-Pro] Improve long-term stability.
Bugfixes
- [UAP-Gen2/Gen3] Fix unstable 2.4GHz client connectivity.
- [UAP-Gen2/Gen3] Fix Mac OS Monterey clients being unable to connect to a new WPA-EAP WLAN, introduced in 5.70.0.
- [UAP-Gen4/Gen5] Fix vendor band steering (under AP property panel) causing Protect camera disconnections.
- [UAP-Gen6] Fix occasional firmware update failures that would leave the AP stuck in an upgrading state (LED blinking white and blue).
- [UAP-Gen6] Resolve some WPA3 connectivity issues.
- [UAP] Fix radio band being enabled even when no WLANs are configured on it, introduced in 6.0.12.
Additional information
Please report any issues you encounter with this release using the Report Bug form.
- U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
- Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
- Please refer to this article to find more details on how to identify your Access Point generation.
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
- All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).
Download links
UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum
UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum
UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum
U6-Pro/Mesh/IW/Extender/Enterprise | md5sum | sha256sum
U-LTE/U-LTE-Pro | md5sum | sha256sum
-
Wäre vielleicht cool, wenn du auch die DL Links mit anhängen würdest in den zukünftigen Posts, ansonsten Super Job!
-
Installiert danke
-
6.0.13 läuft bisher stabil ohne Probleme
-
UAP Firmware 6.0.14
https://community.ui.com/releases/UAP-Firmware-6-0-14/5124e55d-7e0e-4140-af17-b12755db2e9a
Improvements
- [UAP-Gen6] Improve traffic statistics.
Bugfixes
- [UAP-Gen2] Fix random reboots with no crash log.
- [UAP-Gen4/Gen5] Fix ACLs larger than 64 entries not working.
- [UAP-Gen2/Gen3/Gen6] Fix wireless uplink related issues.
- [U6-LR] Fix 2.4GHz radio always broadcasting 802.11d country IE
Additional information
Please report any issues you encounter with this release using the Report Bug form.
- U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
- Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
- Please refer to this article to find more details on how to identify your Access Point generation.
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
- All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).
Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:
- Network Application version.
- Firmware version (previous and current).
- Device model(s).
Download links
UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum U6-Lite | md5sum | sha256sum U6-LR | md5sum | sha256sum U6-Pro/Mesh/IW/Extender/Enterprise | md5sum | sha256sum
-
Danke!!