Beta UAP 6.x.xx

Es gibt 137 Antworten in diesem Thema, welches 39.364 mal aufgerufen wurde. Der letzte Beitrag () ist von BlackSpy.

    UAP Firmware 6.2.9

    https://community.ui.com/releases/UAP-Firmware-6-2-9/f2fcab20-edc7-4838-b377-4077cf3a5112


    Overview

    This version provides a new High-Performance Devices (band steering) logic. This new logic is less strict than the implementation in previous versions and allows dual-band devices join the 2.4GHz network under certain conditions. Users should expect better interoperability (like less client error messages during association, more reliable access for all device types) and extended range in case of insufficient 5GHz signal level.

    If a 5GHz-capable client happens to get onto the 2.4GHz network, the new logic will also try to steer the client to the 5GHz network post-association using BSS Transition Management frames.

    Please test with various devices, observe if they always use the optimal band, and report any client error messages during association, incorrect band usage or blocked access.


    Please disable Band Steering under the AP Property Panel when testing the new implementation of Band Steering (High Performance Devices) under WLAN settings.

    Improvements

    • [UAP] Revamp Band Steering (previously called High Performance Devices).
    • [Common] Ensure devices can reliably reach the Network Application after losing connectivity temporarily.

    Bugfixes

    • [Common] Fix firmware version being incorrectly reported as 6.0.123 occasionally.
    • [UAP-Gen6] Fix WPA3 connectivity issues.
    • [U6-Enterprise] Fix not being able to connect to an Open WLAN on 6GHz (OWE).

    Additional information

    Please report any issues you encounter with this release using the Report Bug form.

    • U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
    • Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
    • Please refer to this article to find more details on how to identify your Access Point generation.
    • Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
    • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).


    Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

    • Network Application version.
    • Firmware version (previous and current).
    • Device model(s).

    Download links

    UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

    UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

    UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

    U6-Lite | md5sum | sha256sum

    U6-LR | md5sum | sha256sum

    U6-Pro/Mesh/IW/Extender/Enterprise | md5sum | sha256sum

    Gefällt mir 1

    Grundsätzlich läuft die Firmware gut. Allerdings zickt einer meiner HD Nano's und läßt sich nicht upgraden bzw. fällt immer wieder auf die alte 14er Firmware zurück.

    ------

    vg

    Franky

    Das neue Band steering läuft super. Früher waren Max 12-13 auf 5 Ghz. Jetzt meine ganzen 17 Geräte was 5Ghz können. Auch die Geschwindigkeit beim Test hat sich verbessert. Außer 2 Kameras haben Probleme sich mit 2,4GHz stabil zu verbinden.

    6.2.9 läuft bei mir auch unauffällig. Änderungen habe ich (noch) nicht nicht beim BS feststellen können.

    Zitat von BlackSpy

    Please disable Band Steering under the AP Property Panel when testing the new implementation of Band Steering (High Performance Devices) under WLAN settings.

    Bei mir wird das bei den aps gar nicht angezeigt?!


    Hab and steering unter den 3 wlans aber mal eingestellt.

    Man kann neuerdings die Farben der aps LED wieder einstellen. U6 pro udn u6 lr

    Es gibt bei mir Probleme mit Band Steering und der G3 Instant Camera (permanente disconnects - bis zu 80 pro 15 Minuten).


    Deaktivieren von Band Steering führt sofort zum Erfolg. Alle anderen fixing Möglichkeiten bei der Camera haben nichts gebracht.

    ------

    vg

    Franky

    Zitat von Samhain

    G3 Instant Camera (permanente disconnects - bis zu 80 pro 15 Minuten).

    Bei der G3 Instant habe ich kein Problem. Die Bleibt fix bei 5G, Auch die Dorbell.


    Nur bei meiner Reolink Kamera habe ich genau dein geschildertes Problem. Sie verbindet und wird nach ein paar Sekunden wieder Diskonektet. Ich glaube ich weis auch warum. Habe bei der Kamera nur ein schwaches 5G Signal. Die Kamera will auf 5G verbinden kommt aber keine Verbindung zusammen da Signal für U6-LR zu schwach und er verbindet auf 2,4G. Kaum verbunden sagt die Kamera he ich habe 5G und will wieder verbinden. Und das geht die Ganze Zeit so hin und her. Ich denke da muss Unifi den Algorithmus noch nachbessern.

    UAP Firmware 6.0.15

    https://community.ui.com/releases/UAP-Firmware-6-0-15/45a9234c-b0d0-4488-a503-81e5200efe80


    Overview

    * Changelog is since 6.0.14.


    We realize that the version string on this release is lower than our previous beta release. The reason for this tag being released to beta is that we are trying to release some bug fixes to the public (Official).


    Thank you for being a great beta community!

    Improvements

    • [Gen4/Gen5] Improve overall stability.
    • [Common] Ensure devices can reliably reach the Network Application after losing connectivity temporarily. This also resolves high CPU usage reported by some users.
    • [Common] Update regulatory data for Bahrain to align with country requirements.

    Bugfixes

    • [UAP-Gen6] Resolve issues with upgrading the AP, requiring a manual power cycle and SSH upgrade. Please note that this fix will apply when updating from 6.0.15. It is possible to experience the bug when upgrading to 6.0.15 from affected versions.
    • [UAP-Gen2/3/4/5] Fix multicast issues affecting IoT device interoperability.
    • [UAP-Gen5] Fix 5GHz radio not broadcasting after a DFS hit when bandwidth is set to HE160.
    • [UAP-Gen4] Resolve throughput issues with Samsung A-series devices.
    • [UAP-Gen2] Fix reboot loop when the same VLAN ID is used for management and WLAN. This should resolve the reboot loops certain users were experiencing right after upgrading.
    • [UAP-Gen2] Fix iOS connectivity issues that primarily occurred in networks with wireless uplinks (associated with `ol_txrx_ast_find_hash_remove` in the logs).
    • [Common] Fix firmware version being incorrectly reported as 6.0.123 occasionally.

    Additional information

    Please report any issues you encounter with this release using the Report Bug form.

    • U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
    • Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
    • Please refer to this article to find more details on how to identify your Access Point generation.
    • Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
    • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).


    Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

    • Network Application version.
    • Firmware version (previous and current).
    • Device model(s).

    Download links

    UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

    UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

    UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

    U6-Lite | md5sum | sha256sum

    U6-LR | md5sum | sha256sum

    U6-Pro/Mesh/IW/Extender/Enterprise | md5sum | sha256sum

    6.2.9 ist eine Beta ..oder sowas

    Vigor 167 - OPNsense- 4x US-8-60W - US-8-150W- US-24-250W - 4 x UAP-AC-PRO- 4 x UAP-AC-M 6 x USW-Flex-Mini - Proxmox-Cluster -TrueNas- Fhem- Homematic und jede Menge anderen Blödsinn der eigentlich nur Strom frisst aber mir freude macht :smiling_face_with_sunglasses:

    Die 6.2.9 wird aber über den Controller und EA nicht mehr angeboten

    Das Beta Team macht heute Überstunden :winking_face:


    UAP Firmware 6.2.13

    https://community.ui.com/releases/UAP-Firmware-6-2-13/8af48ad1-8078-4139-8ae3-3d1e81fa443d


    Overview

    * Changelog is since 6.2.9.


    Please pay special attention to the stability of your APs on this release. We would like to identify and fix any remaining kernel instabilities leading to unexpected reboots.

    If you notice an unexpected reboot, please SSH into the AP and run oopsdump; cat /var/run/last-crashlog.txt and share the output. Thank you all!

    Improvements

    • [UAP-Gen2/Gen3/Gen6] Improve compatibility with legacy 802.11b devices.
    • [UAP-Gen4/Gen5] Revamp dynamic VLAN to reduce memory usage overhead. Please let us know if any issues with RADIUS assigned VLANs are observed starting this version.
    • [UAP-Gen4/Gen5] Improve overall system load.
    • [UAP] Update regulatory data for Israel and Bahrain to align with country requirements.
    • [UAP] Restructure the impact of DNS timeouts on the Wireless Experience Score.
    • [UAP] Setting the transmission power to 'Low' will now set it to 11dBm instead of the minimum possible for the radio (often 6dBm). The 'Custom' mode still allows the transmission power to be set to the minimum value, if that is what users desire.
    • [U-LTE-Pro] Improve SIM card removal detection.

    Bugfixes

    • [UAP-Gen6] Fix radios not broadcasting in certain countries, starting 6.2.9.
    • [UAP-Gen6] Fix ghost MAC addresses in client list caused by Gen6 APs, introduced in 6.2.9.
    • [UAP-Gen6] Resolve issues with upgrading the AP, requiring a manual power cycle and SSH upgrade. Please note that this fix will apply when updating from 6.0.15 and 6.2.13. It is possible to experience the bug when upgrading to 6.2.13 from affected versions.
    • [UAP-Gen6] Fix Singapore 802.11d transmission power advertisements.
    • [UAP-Gen2/3/4/5] Fix multicast issues affecting IoT device interoperability.
    • [UAP-Gen5] Fix 5GHz radio not broadcasting after a DFS hit when bandwidth is set to HE160.
    • [UAP-Gen4] Resolve throughput issues with Samsung A-series devices.
    • [U6-LR] Fix being unable to set the 2.4GHz Transmission Power to the maximum support value when setting a custom TX power value.
    • [UAP-Gen2] Fix wireless uplink stability issues.
    • [UAP-Gen2] Fix reboot loop when the same VLAN ID is used for management and WLAN. This should resolve the reboot loops certain users were experiencing right after upgrading.
    • [UAP-Gen2] Fix iOS connectivity issues that primarily occurred in networks with wireless uplinks (associated with `ol_txrx_ast_find_hash_remove` in the logs).
    • [UAP] Fix WEP broadcasting as Open, introduced in 6.0.x.
    • [UAP] Fix band steering interfering with minimum RSSI leading to clients disconnecting and reconnecting repeatedly, introduced in 6.2.9.
    • [UAP] Partly fix hostnames in guest preauthorized access list not working. Full fix will be rolled in via a Network Application update. This partial fix covers cases where guest VLANs are in use.
    • [UAP] Fix wireless uplink issues when uplink monitor is set to check connectivity to 127.0.0.1 (localhost).
    • [UAP] Fix AP reboot when trying to adopt a UniFi Talk ATA.

    Additional information

    Please report any issues you encounter with this release using the Report Bug form.

    • U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
    • Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
    • Please refer to this article to find more details on how to identify your Access Point generation.
    • Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
    • All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).


    Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

    • Network Application version.
    • Firmware version (previous and current).
    • Device model(s).

    Download links

    UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

    UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

    UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

    U6-Lite | md5sum | sha256sum

    U6-LR | md5sum | sha256sum

    U6-Pro/Mesh/IW/Extender/Enterprise | md5sum | sha256sum

    U-LTE/U-LTE-Pro | md5sum | sha256sum

    Gefällt mir 1

    Hatten eben auch so ein Phänomen das er ewig rausflog (Nano HD), hatte sich durch einen anderen Port wieder berappelt, vielleicht auch mal ausprobieren, falls möglich. Hier der Link zum anderen Thread.


    Gruß hommes

    Umfrage G3 Instant Preisgestaltung

    Umfrage Ubiquiti Setup, Danke

    Umfrage Versandkosten EU-Store


    Mein Heimnetz

    Danke 1