UniFi Protect Application 2.2.1-beta.8

https://community.ui.com/releases/UniFi-Protect-Application-2-2-1-beta-8/d34a69ca-466f-40bc-a03b-bfb3aac6e558

Improvements

• Web UI: Improve Livestream when the camera is on slow WiFi.
• Web UI: Show that the lens is missing for unadopted AI-Theta.
• Web UI: Improve Livestream behavior on safari.
• AI-Theta: Improve image quality.
• Improve video start-up time for wireless cameras.

Bugfixes

• Web UI: Fix an issue where audio is not getting muted for G4 Doorbell Pro.
• Web UI: Fix an issue that caused video streams to restart when expanding video in the live grid.
• Web UI: Fix page crashes when removing a device.
• Web UI: Fix a bug that did not allow to cancel changes in settings.
• Web UI: Fix a bug that causes streams to not start when switching between cameras in playback.
• Web UI: Fix bug where prev/next buttons didn’t work in the popup player.
• Fix UP-Sense notification value rounding.
• Fix camera FW not updating when using the Release Candidate release channel.
• Fix bug which caused database corruption after ungraceful console shut down.
• Fix bug that didn’t allow exporting videos for secondary NVR in remote connections.
• Fix bug that caused “Recovery code” for some cameras not to change.
• Fix bug that caused console restart when adding new smart detection zone.
• G4-PTZ: Restore PTZ's last position on reboot.
• Wireless Cameras: Fix Rogue AP notification in the UniFi Network application.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

UniFi Protect Application 2.2.2

https://community.ui.com/releases/UniFi-Protect-Application-2-2-2/c681c6d9-0b75-4336-a113-5531fd557cf0

Improvements

• Improve the camera update process.

Bugfixes

• Web UI: Fix the issue where recordings do not start playing.
• Web UI: Fix page crash in live view grid.
• Other stability fixes & improvements.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

UniFi Protect Application 2.2.3

https://community.ui.com/releases/UniFi-Protect-Application-2-2-3/44035f60-4ae8-4786-b52d-4101aa079458

Bugfixes

• Web UI: Fix unable to pair certain cameras to IoT devices.
• Web UI: Fix inaccurate storage information.
• Web UI: Fix misleading "resolution lowered" for wired cameras.
• Restore all device configurations after formatting the disks.
• Fix rare application crashes for stackable NVRs.
• Fix unable to upgrade camera firmware in some rare cases.
• Streaming: Fix laggy/buffering live streams.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

UniFi Protect Application 2.2.4

https://community.ui.com/releases/UniFi-Protect-Application-2-2-4/4b525c35-2664-48de-98e3-5cfda0ee5d12

Bugfixes

• Web UI: Fix misleading "resolution lowered" for wired cameras.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

UniFi Protect Application 2.2.6

https://community.ui.com/releases/UniFi-Protect-Application-2-2-6/7ea339ac-a8d1-4316-89d9-47952746949f

Improvements

• Update camera firmware version to 4.57.35.
• G5-Bullet: Improve device stability.

Bugfixes

• Fix rare application crashes.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

UniFi Protect Application 2.6.13

https://community.ui.com/releases/UniFi-Protect-Application-2-6-13/cca211b6-53d2-4c06-ae8e-a2324e8c9777

Overview

This version requires you to have UniFi OS version 3.0 or newer.

Improvements

• Upgrade Node.js to 16.14.2
• Upgrade PostgreSQL to 14.4-1

Known issues

• Web UI: Misleading "resolution lowered" for wired cameras.
• Web UI: Unable to pair certain cameras to IoT devices.
• Web UI: Inaccurate storage information.
• G5-Bullet: Rare device stability issue.
• Streaming: Rare laggy/buffering live streams issue on 4K cameras.

UniFi Protect Application 2.6.14

https://community.ui.com/releases/UniFi-Protect-Application-2-6-14/2a36a649-b591-4b13-9603-6f3ee5b400a4

Overview

This version requires you to have UniFi OS version 3.0 or newer.

Improvements

• Update the camera firmware version to 4.57.35.
• G5-Bullet: Improve device stability.
• Re-adopt cameras automatically when pressing the reset button.

Bugfixes

• Web UI: Fix unable to pair certain cameras to IoT devices.
• Web UI: Fix inaccurate storage information.
• Web UI: Support 24h time format in the schedule editor.
• Web UI: Fix PTZ Zoom slider not updating when using keyboard controls.
• Fix devices get stuck in "adopting" state in rare cases.
• Fix a database migration issue.
• Fix unable to upgrade camera firmware in some rare cases.
• Fix rare application crashes.
• Streaming: Fix laggy/buffering live streams.

Known issues

• Web UI: Misleading "resolution lowered" for wired cameras.
• Emails/Push notifications are not working, this requires a new UniFi OS release, no exact ETA.

wieder erst ab OS3 oder höher

UniFi Protect Application 2.6.16

https://community.ui.com/releases/UniFi-Protect-Application-2-6-16/4ac7a294-c608-45a3-811c-fdd41ab85c12

Overview

This version requires you to have UniFi OS version 3.0 or newer.

Improvements

• Improve G4-Instant firmware update process.
• Improve database migration stability.

Bugfixes

• Web UI: Fix incorrect tooltip information for Export/Import configuration.
• Fix a rare UP-Chime adoption issue.
• Fix unreliable audio levels.
• Fix a rare start of recording issue.

Known issues

• Web UI: Misleading "resolution lowered" for wired cameras.
• Unable to adopt wireless cameras or UP-Chime in multiple VLAN environments.
• Cannot receive “Package” detection notifications for G4 Doorbell.

Und wieder only OS3

UniFi Protect Application 2.6.17

https://community.ui.com/releases/UniFi-Protect-Application-2-6-17/a4bf4683-bf3c-4cff-890a-05c2759a3b0b

OverviewOverview

This version requires you to have UniFi OS version 3.0 or newer.

Improvements

• Web UI: Update the adoption with recovery code modal.
• Improve database migration stability.
• Improve “Autolink” stability.
• Improve reliability for adopting UP-sense.
• Update the camera firmware version to 4.57.36.
• Improve wireless connectivity.

Bugfixes

• Web UI: Fix duplicated Device Group names.
• Web UI: Fix the Zoom slider not updating in Live Views.
• Web UI: Disallow adopting door locks, sensors, and chimes that are managed by other consoles.
• Fix a rare stream lagging issue.
• Fix a rare camera adoption issue.
• Fix unable to receive “Package” detection notifications for G4 Doorbell.
• Fix unable to adopt wireless cameras or UP-Chime in multiple VLAN environments.

Known issues

• Web UI: Misleading "resolution lowered" for wired cameras.
• Streaming: Unable to view the high-quality live stream on the LiveView grid when it contains more than 6 cameras. (since at least 2.6.x)

UniFi Protect Application 2.7.5

https://community.ui.com/releases/UniFi-Protect-Application-2-7-5/99175c37-4488-4a05-b84e-11b0c5042484

Overview

This version requires you to have UniFi OS version 3.0 or newer.

Improvements

• WebUI: Add support for readopted Wireless Camera Disconnected.
• WebUI: Add support for sharing Livesteams.
• WebUI: Update device side panel design.
• WebUI: Update device experience scores to Excellent, Good and Poor.
• WebUI: Update floodlight icon.
• WebUI: Update zone editor UX.
• WebUI: Update System logs page UX.
• WebUI: Update UI components.
• WebUI: Improve detections page UX.
• WebUI: Improve FW updates states and behaviors.
• WebUI: Improve dashboard UX.
• WebUI: Improve device disconnection events.
• WebUI: Improve how videos work on mobile devices.
• WebUI: Improve Live Stream retry functionality.
• WebUI: Revert audio levels to bars chart in the Timeline.
• WebUI: Replace Bluetooth signal strength with experience.
• WebUI: Rename connection status to Online/Offline.
• WebUI: Only display console in the Dashboard.
• WebUI: Enable low latency by default.
• WebUI: Enhance Live Stream with poor wifi connection for Live View page/Playback.
• WebUI: Show console name in camera limit warning toast.
• Reduce CPU usage in Live View grid.
• G4/G5/AI Series cameras: Add support for Smoke (UL-217)/CO alarm detection (UL-2034).
• AI Bullet/ AI Theta/ AI DSLR: Add license plates detection.
• Add stackable console configuration backups.
• Automatically recover recording stream when disk write speed is low.
• Improve camera streams when there is poor network connectivity.
• Align WiFi Signal strength with APs.
• Show AP/Switch uplink service status in timelapse.
• Improve video quality of exported timelapse video.
• Improve system performance and storage utilization.
• Update the Camera firmware version to 4.59.37.
• Wireless camera: Improve wireless camera connectivity.
• AI-DSLR: Improve image quality.
• Smart Detect: Overhead detection model improvement for AI-360 / AI-Theta, Add smallest image size criteria for fisheye dewarped thumbnails.
• Improve connection stability.
• Fix some rare issues with Auto Exposure AUTO mode.
• G3-Flex: Fix AE damping under intense light.
• G4-Instant: Fix timestamp being backward in the video.
• AI-Bullet: Fix streaming juttering when using High Frame Rate mode.
• AI-Theta: Fix auto rotate stopped working.
• Update the Floodlight firmware version to 1.10.0.
• Supports customized hostname.
• Update the UP Chime firmware version to 1.3.5.
• Improve stability of Autolink and BLE adoption.
• System/Cameras: Improve stability.

Bugfixes

• WebUI: Fix date picker UX bugs.
• WebUI: Fix minor detection page copy.
• WebUI: Fix incorrect message for device/console restarts.
• WebUI: Fix audio levels are not smooth.
• WebUI: Fix page scroll when opening the playback page.
• WebUI: Fix sensor detections dropdown error.
• WebUI: Fix padding in the playback page.
• WebUI: Fix UP Sense door opened/closed icons.
• WebUI: Fix the misleading "Lost power" message in the timeline.
• WebUI: Fix squashed animated thumbnails.
• WebUI: Fix the wrong timer for the "offline" camera.
• WebUI: Fix player options not available when zoomed in.
• WebUI: Fix the error that the package cam small player is not loading when switching between cameras in timelapse.
• WebUI: Hide the empty checkbox while the device is in an intermediate state after unadopting.
• WebUI: Reset camera status on time lapse when changing devices.
• WebUI: Correctly reset device filter checkboxes.
• WebUI: Show the selected month when reopening the date filter.
• Fix rare issue where live streams on Viewports from a G3-Dome had high latency.
• Fix incorrect video export duration.
• Fix a rare issue that “Console Update” event in timeline never ended.

Known issues

• Streaming: Unable to view the high-quality live stream on the LiveView grid when it contains more than 6 cameras. (since at least 2.6.x)

UniFi Protect Application 2.7.7

https://community.ui.com/releases/UniFi-Protect-Application-2-7-7/70d42611-64c7-41a7-8254-300156ec9ab9

Overview

This version requires you to have UniFi OS version 3.0 or newer.

Improvements

• Update the Camera firmware version to 4.60.7.
• AutoLink: Fix rare adoption issues.
• G4-Instant: Fix bitrate going down and resulting in bad video quality.
• AI-DSLR: Fix Auto Focus out of range when auto rotate is enabled
• AI-Theta: Enhance auto flip/mirror tolerance.

Bugfixes

• Web UI: Fix incorrect doorlock icons
• Web UI: All cameras must be checked under Display Options on the detections page by default.
• Web UI: Use the correct size for all the icons in the navigation bar
• Web UI: Disable HQ streaming option when HQ recording is disabled due to poor network connection
• Web UI: Fix redundant UP-Sense detection events in the system log
• Web UI: Fix WiFi signal strength does not get updated.

Known issues

• Streaming: Cannot view High-Quality live streams in the Live Grid when it contains more than six cameras. (since at least 2.6.x)
• Sharing live streams does not work when using a browser on an iOS mobile device.
• AI-Bullet/Theta/DSLR: The camera must be readopted and enable vehicle detection to enable License Plate Detection.