UniFi Network Application 7.1.61
Overview
- Add Teleport VPN (Requires firmware version 1.12.x/2.4.x or newer). (not available for UXG)
- Add Traffic Routes (Requires UDM/UXG firmware version 1.12.8/2.4.x or newer)
- Add Switch Ports Insights and bulk-port editing.
- Improve Search & Filters on the Devices/Clients/Notifications page.
- Improve Traffic statistics.
- Improve UX for Global AP Settings.
- Improve WiFi Statistics UX.
Improvements
- Add AP widget for UniFi clients.
- Add MIMO column in the Clients page.
- Add 802.1x ID/VLAN column in the Clients page.
- Add warning for HTTPS limitation when Facebook WiFi is selected.
- Add IPv6 support for UID VPN.
- Add multi-search to Devices, UniFi Devices & Notifications.
- Add missing WAN DHCP Client options.
- Add confirmation dialog to disable the AP meshing setting.
- Add option to forget clients.
- Add IP validation before setting a Honeypot IP.
- Add information if WAN IP is a local IP when configuring a VPN.
- Add max DHCP Lease Range validation for Network form.
- Allow Client connect to lock APs only if selected AP is stable.
- Improve the Advanced adoption UX.
- Improve fixed IP Address error message.
- Improve wireless uplink adoption stability.
- Improve Settings Search page highlight.
- Improve display of the channel value in the WiFiman table and property panel.
- Update the device manage section UX.
- Update USW-Pro-Aggregation property panel.
- Update unrecognized client icons.
- Update RPS Anomalies list.
- Update countries and territories in Country restrictions.
- Update default Gateway ARP Cache timeout to 10 minutes.
- Update Settings Search UX.
- Update DPI Signatures (Requires 1.12.15 or newer).
- Update Log4j to 2.17.2.
- Enable debug terminal for USP RPS.
- Show offline Non-Network devices on the Device page
- Show Link Quality as experience for UBB's.
- Show what Radio is used for the Link in the UBB property panel.
- Show USW-Flex-Mini memory usage in the devices table.
- Display Clients/Guests at the top of the Device panel.
- Display Device Capacity for Cloud Console.
- Display last seen in the uptime column.
- Replace (unsupported) Power Utilization with Memory Usage for USP-Strip/Plug.
- Re-organize clients side panel overview.
- Process device updates less frequently on larger setups.
- Close U-LTE setup wizard final screen when U-LTE is adopted.
- Do not include offline devices in the Lock AP device capability check.
- Remove Network dropdown under Settings for Gateways, which already exists under Overview.
- Unlock Client locked to Access Point if it was forgotten.
Bugfixes
- Fix issue where limited admins cannot access the application in rare cases.
- Fix issue where admin notifications were sent, although disabled.
- Fix missing validation for DHCPv6 Range.
- Fix issue where Honeypot Alert source IP and service column were empty.
- Fix issue where “Provision” and “Open Terminal” toggle were not grayed out for offline devices.
- Fix issue where channel width shows blank when configured via mobile apps.
- Fix issue in RF Scan output.
- Fix inability to set Fixed IP addresses for a client on sites with L3 Switches.
- Fix connected downlink incorrectly reported as isolated.
- Fix firewall IP range validation.
- Fix tiny theme images on the Safari browser.
- Fix SMTP settings are ignored when sending mail.
- Fix checkbox value for disabled Multicast DNS Setting.
- Fix missing default sorting for Port and IP Groups.
- Fix incorrect time format for device firmware update check.
- Fix AP Group selection.
- Fix incorrect warning messages when UBB is upgrading.
- Fix missing custom upgrade for UXG.
- Fix missing services configuration for USP-RPS/UXG-Pro.
- Fix port remapping issues with UXG/USG.
- Fix uplink device showing itself in port diagram tooltips.
- Fix device is downgraded during adoption.
- Fix Utilization chart shouldn't surpass 100%.
- Fix missing Clients/Guests for UXG.
- Fix UBB LED configuration.
- Fix issue preventing provisioning Firewall rules, Traffic Rules, and Traffic Routes with paused Networks.
- Fix issue when the user can’t edit Threat Management settings.
- Fix issue where devices connected to the port with LAG enabled do not reconnect after the application update.
- Fix issue where Site-to-Site VPN connection is stalling in rare cases.
- Fix rare upgrade issue for those upgrading from version 4.x.
- Fix issue where Honeypot hits with Detect Only setting for Threat management don't send notifications to users.
- Fix issue where incorrect System Sensitivity was set when enabling Threat management.
- Fix issue where Guest Hotspot Profile couldn't be saved in rare cases.
- Fix issues in Switch port insights on Safari browser.
- Fix Country Restriction limit for UXG.
- Fix issue where DHCP Guarding option was not available in Network settings.
- Fix missing information in device columns if the device has an update available.
- Fix issue where changes were not saved when changing Access Point Channel Optimization setting.
- Fix issue where APs Wireless Meshing setting unexpectedly resets to "Auto" value.
- Fix issue where Multi-factor authentication with non-default method failed on the Remote Access portal.
- Fix issue where Firewall & Security Settings cannot be saved.
- Fix issue where Guest Hotspot vouchers cannot be printed.
- Fix issue where Time Range for Traffic Rule cannot cover nighttime.
- Fix device image size for devices with long names.
- Fix page crashes when switching between sites in rare cases.
- Fix issue where "Down Pkts/Bytes" was listed twice.
- Fix issue where AP settings are incorrect temporary after making some changes.
- Fix an issue where the Auto Update dialog showed up twice.
- Fix issue where Min. Data Rate Control for 2.4 GHz in WiFi settings cannot be enabled.
- Fix issue where Internet settings reset to Auto when adding DDNS entries.
- Fix old reference to Connectivity Monitor in the max SSID's tooltip.
- Fix issue where WiFi Guest Network Type could revert to Standard.
- Fix missing Client MAC address in client property panel when the client is offline.
- Fix issue where certain admins cannot edit certain settings after restoring from a backup.
- Fix the issue where System Settings can't be saved.
- Fix issue where default port profiles were not read-only.
- Fix unable to open device property panels for disabled/disconnected devices.
- Disable AP Nightly Channel Optimization Toggle if the global AP setting is disabled.
- Disable the Wireless Meshing setting if it can not be turned on.
- Disable DPI service if Traffic Identification is disabled.
- Hide interface options for not supported devices in Port Forwarding form.
- Show DPI Restrictions for supported consoles if any existing rule exists.
- Prevent situation when UBB AP data were shown as Station and the other way round; also show correct wired/wireless uplink type.
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu and UniFi Cloud Key