UniFi Access Point 7.0.56

https://community.ui.com/releases/UniFi-Access-Point-7-0-56/78da6f1f-5cb4-4e0e-a307-7ca1cecce50e

Improvements

• [Gen7] Improved VLAN throughput.

Bugfixes

• Fixed Hotspot connectivity issues introduced in 7.0.55.
• Fixed excessive logging because of app crashes (lldpd) when certain clients are connected.
• [Gen7] Fixed 6GHz SSID connectivity and scanning issues introduced in 7.0.53.
• [Gen7] Fixed kernel crashes to improve overall stability.
• [Gen7] Fixed meshed AP not broadcasting 5GHz in rare cases.

Additional information

• Refer to the Help Center article here to determine the UniFi Access Point generation.
• Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version

Download links

U6-Mesh-Pro | md5sum | sha256sum

U7-Pro | md5sum | sha256sum

UniFi Access Point 7.0.58

https://community.ui.com/releases/UniFi-Access-Point-7-0-58/24cc1741-577e-4804-a501-e2f4b323634b

Improvements

• [Gen7] Improved device stability by fixing kernel crashes.

Bugfixes

• Fixed failing wireless adoption of gen5 APs. This was introduced in 7.0.56.
• Fixed intermittent Debug Terminal failures.
• [U7-Pro-Max] Fixed intermittent Spectrum Scan failures.
• [Gen7] Fixed AirPlay/cast instability with HomePods, Google Home, and other smart speakers connected to a VLAN. This was introduced in 7.0.55.

Additional information

• Refer to the Help Center article here to determine the UniFi Access Point generation.
• Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version

Download links

U6-Mesh-Pro | md5sum | sha256sum

U7-Pro/Pro-W/Pro-Max | md5sum | sha256sum

UniFi Access Point 7.0.59

https://community.ui.com/releases/UniFi-Access-Point-7-0-59/d39ff200-aa5f-4683-958d-9c1a43277467

Bugfixes

• Fixed IPv6 RAs leaking from the default network to VLAN-tagged networks.

Additional information

• Refer to the Help Center article here to determine the UniFi Access Point generation.
• Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version

Download links

U6-Mesh-Pro | md5sum | sha256sum

U7-Pro/Wall/Max | md5sum | sha256sum

Die .59 ist nun RC

UniFi Access Point 7.0.59

https://community.ui.com/releases/UniFi-Access-Point-7-0-59/4d4af905-d7dc-46c5-b66b-cc8851453b37

Overview

This release improves VLAN throughput and roaming on U7-Pro. It also fixes AirPlay/Cast instability for smart speakers connected to U7-Pro-Wall and U7-Pro-Max.

Improvements

• Improved firmware update resiliency.
• [Gen7] Improved VLAN throughput.
• [Gen7] Improved 2.4GHz latency and connection stability.
• [Gen7] Improved interoperability with IoT devices.
• [Gen7] Improved 6GHz range.
• [Gen7] Improved WPA2/WPA3 roaming for WPA3 clients.
• [Gen7] Improved thermal behavior.
• [Gen7] Improved throughput and overall performance.
• [Gen7] Improved DFS radar detection accuracy.
• [Gen7] Reduced excessive logging.

Bugfixes

• Fixed intermittent Debug Terminal failures.
• [Gen7] Fixed SSIDs stop broadcasting after a few hours of uptime in rare cases.
• [Gen7] Fixed repetitive logging (append: not found, Scan table size) in some cases.
• [Gen7] Fixed false positive Rogue AP alerts when multiple APs are broadcasting at 6GHz.
• [Gen7] Fixed manually set 6GHz channel occasionally changing automatically.
• [Gen7] Fixed Auto channel not scanning for the cleanest channel when channel width is changed.
• [Gen7] Fixed maximum supported bandwidth not being reported correctly for 320MHz capable clients.
• [Gen7] Fixed kernel crashes to improve overall stability.
• [Gen7] Fixed APs going into an Adoption Failed state when the Network Application host (console) IP address changes.
• [Gen7] Fixed RF Environment Scanning on APs not broadcasting any SSIDs causing the devices to get stuck in a `Scanning` state.
• [Gen7] Fixed false-positive "Multiple devices are using the same IP address" alerts.
• [Gen7] Fixed wireless adoption failure in rare cases.
• [Gen7] Fixed rare client association failures when 3 or more 6GHz SSIDs are broadcasting on the same AP.
• [Gen7] Fixed 6GHz channel being set to 1 after an RF Environment Scan.
• [Gen7] Fixed false positive Authentication failures being reported on Radios->Connectivity page.
• [Gen7] Fixed clients connecting at lower than expected rates after certain configuration changes.
• [Gen7] Fixed meshed AP not broadcasting 5GHz in rare cases.
• [U7-Pro-Max] Fixed intermittent Spectrum Scan failures.
• [U7-Pro-Max/U7-Pro-Wall] Fixed IPv6 RAs leaking across VLANs.
• [U7-Pro-Max/U7-Pro-Wall] Fixed failing wireless adoption of U6-Lite, U6-LR, and U6+.
• [U7-Pro-Max/U7-Pro-Wall] Fixed AirPlay/cast instability with HomePods, Google Home, and other smart speakers connected to a VLAN.

Additional information

• Refer to the Help Center article here to determine the UniFi Access Point generation.
• Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Release Candidate.
• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version

Download links

U6-Mesh-Pro | md5sum | sha256sum

U7-Pro/Wall/Max | md5sum | sha256sum

UniFi Access Point 7.0.61

https://community.ui.com/releases/UniFi-Access-Point-7-0-61/452fa5c3-6bfc-4f58-a5ac-057e65e90549

Improvements

• Improved automatic 6GHz channel selection.
• Improved ethernet negotiation with legacy Cisco switches.
• Improved RSSI accuracy when multiple clients are connected to the same radio.
• Improved roaming to non-U7 APs (Generation 2-6 UAPs) when Fast Roaming is disabled.
• Improved Wi-Fi 7 client compatibility.
• [U7-Pro-Max] Reduced excessive logging during spectrum scans.

Bugfixes

• Fixed WiFi Speed Limits not being applied for clients right after configuring it until the clients reconnect.
• Fixed 6GHz connectivity issues in some cases when multiple 6GHz SSIDs are configured.
• Fixed 6GHz channel and width changing after an RF Scan.
• Fixed secondary NTP server not being used if the primary server is unreachable.

Additional information

• Refer to the Help Center article here to determine the UniFi Access Point generation.
• Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version

Download links

U6-Mesh-Pro | md5sum | sha256sum

U7-Pro/Wall/Max | md5sum | sha256sum

U7-Outdoor | md5sum | sha256sum

UniFi Access Point 7.0.62

https://community.ui.com/releases/UniFi-Access-Point-7-0-62/acc87101-722d-468e-ac0f-3782463023c8

Improvements

• Improved roaming between meshed Access Points.
• Improved adoption stability.
• Updated channel list for Japan and Indonesia.
• [Gen7] Improved ethernet negotation.
• [Gen7] Fixed Target Wake Time, this will improve power efficiency and optimize network performance for some battery powered devices.

Bugfixes

• [Gen7] Fixed an issue where RADIUS CoA requests weren't forwarded properly.

Additional information

• Refer to the Help Center article here to determine the UniFi Access Point generation.
• Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version

Download links

U6-Mesh-Pro | md5sum | sha256sum

U7-Pro/Wall/Max | md5sum | sha256sum

U7-Outdoor | md5sum | sha256sum

UniFi Access Point 7.0.63

https://community.ui.com/releases/UniFi-Access-Point-7-0-63/4d5b8982-53ef-4bb3-987e-a79e39ad17ea

Improvements

• Improved connectivity for IoT devices when using WPA2/WPA3 Transition security mode.
• Added 40/80MHz channel width support for Indonesia.

Bugfixes

• Fixed wrong 6GHz channel number reporting when the AP is managed via the UniFi Mobile app.

Additional information

• Update your devices by changing the Device Firmware Release Channel in the UniFi Network application to Early Access.
• If you wish to go back to the Official release after the upgrade, change the release channel back to Official.

If you encounter any issues with this release, please provide us with some details on your setup and include the below information:

• AP model(s)
• Previous AP release version
• UniFi Network application version

Download links

U6-Mesh-Pro | md5sum | sha256sum

U7-Pro/Wall/Max | md5sum | sha256sum

U7-Outdoor | md5sum | sha256sum