Wäre nett wenn du, gemäß des grünen Text, das Log ziehst und an Unifi schickst..... darum geht es bei der Version.

Die 2.x Versionen sind spezielle Versionen wo Unifi das Bandsteering verbessern will.

Der 0.x Zweig ist zZ der Normale Beta Zweig.

Und es sind alles Beta! Da sollte man sich nicht wundern sollte mal was nicht gehen 😏

UAP 6.0.18 nun RC Kandidat

UAP Firmware 6.0.19

https://community.ui.com/releases/UAP-Firmware-6-0-19/dddc1c17-37c5-487b-a33f-f65ad07b3651

Overview

* Changelog is since 6.0.18.

We realize that the version string on this release is lower than our previous beta release. The reason for this tag being released to beta is that we are trying to release some bug fixes to the public (Official).

Thank you for being a great beta community!

Bugfixes

• [UAP-Gen6] Fix untagged RADIUS clients experiencing packet loss.
• [UAP-Gen4/Gen5] Fix degraded connectivity and performance on APs with high uptime, needing a reboot/power cycle to restore connectivity.
• [U6-LR] Fix ethernet lockup occurring after a network loop.
• [U6-LR] Fix memory leak affecting APs configured with minimum RSSI.
• [UAP] Fix wirelessly uplinked APs (downlinks) going into an isolated state for 30 minutes when all its potential uplink APs are rebooted and uplink priorities are configured.
• [UAP] Fix a number of kernel crashes to improve stability.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

• U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
• Please refer to this article to find more details on how to identify your Access Point generation.
• Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
• All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

• Network Application version.
• Firmware version (previous and current).
• Device model(s).

Download links

UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

U6-Lite | md5sum | sha256sum

U6-LR | md5sum | sha256sum

U6-Pro/Mesh/IW/Extender/Enterprise | md5sum | sha256sum

Die 6.0.19 ist nun RC Kandidat.

Hier noch ein Update auf die Spezialversion, des 6.2.x Zweig

UAP Firmware 6.2.16

https://community.ui.com/releases/UAP-Firmware-6-2-16/5ee0851e-5523-4164-8b93-905587d6b64d

Overview

* Changelog is since 6.2.15.

Improvements

• [UAP-Gen2] Improve 2.4GHz IoT interoperability when Legacy Support is enabled.

Bugfixes

• [UAP-Gen6] Fix 6GHz connectivity issues with Samsung ZFold3 and Samsung S8 tablet.
• [UAP-Gen6] Fix untagged RADIUS clients experiencing packet loss.
• [UAP-Gen6] Fix radios not broadcasting in certain countries.
• [U6-Enterprise] Fix 6GHz clients showing up as 5GHz clients in the Network Application.
• [UAP-Gen4/Gen5] Fix incorrect 802.11k neighbor reports on 2.4GHz radio.
• [UAP-Gen4/Gen5] Fix LLC frames leaking across VLANs.
• [U6-LR] Fix ethernet lockup occurring after a network loop.
• [UAP] Fix a number of kernel crashes to improve stability.
• [UAP] Fix occasional adoption failures.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

• U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
• Please refer to this article to find more details on how to identify your Access Point generation.
• Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
• All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

• Network Application version.
• Firmware version (previous and current).
• Device model(s).

Download links

UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

U6-Lite | md5sum | sha256sum

U6-LR | md5sum | sha256sum

U6-Pro/Mesh/IW/Extender/Enterprise | md5sum | sha256sum

UAP Firmware 6.2.16/ nur Gen6 AP

https://community.ui.com/releases/UAP-Firmware-6-2-16/eadf173b-1964-4ec8-88a3-aa9f59d3722b

Overview

* This release is only for the Gen6 AP's and is currently a Release Candidate.

This version provides a new High-Performance Devices (band steering) logic. This new logic is less strict than the implementation in previous versions and allows dual-band devices join the 2.4GHz network under certain conditions. Users should expect better interoperability, more reliable access for all device types and extended range in case of insufficient 5GHz signal level.

Improvements

• [UAP] Revamp Band Steering (previously called High Performance Devices).
• [UAP] Improve overall stability by fixing a number of kernel crashes.
• [UAP] Restructure the impact of DNS timeouts on the Wireless Experience Score.
• [UAP] Update packages (openssl, dropbear, zlib).
• [UAP] Update regulatory data for Israel and Bahrain to align with country requirements.
• [UAP] Allow ARP traffic on WLAN even if Multicast and Broadcast block is enabled to avoid hindering device discovery."

Bugfixes

• [UAP-Gen6] Fix WPA3 connectivity issues.
• [UAP-Gen6] Fix radios not broadcasting in certain countries.
• [UAP-Gen6] Fix untagged RADIUS clients experiencing packet loss.
• [UAP-Gen6] Fix incorrect signal strength reporting for 5GHz clients.
• [UAP] Fix wireless uplink issues when uplink monitor is set to check connectivity to 127.0.0.1 (localhost).
• [UAP] Partly fix hostnames in guest preauthorized access list not working. Full fix will be rolled in via a Network Application update. This partial fix covers cases where guest VLANs are in use.
• [UAP] Fix occasional adoption failures.
• [UAP] Fix WLANs not broadcasting a few minutes after boot in certain topologies. This was introduced in 6.0.18.

Additional information

• U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
• Please refer to this article to find more details on how to identify your Access Point generation.
• Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
• All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

• Network Application version.
• Firmware version (previous and current).
• Device model(s).

Download links

U6-Pro/Mesh/IW | md5sum | sha256sum

UAP Firmware 6.2.18

https://community.ui.com/releases/UAP-Firmware-6-2-18/7a795573-0b0e-42fc-80b1-1d1b79676fb1

Improvements

• [U-LTE/U-LTE-Pro] Improve overall stability.

Bugfixes

• [UAP-Gen6] Fix random MAC address showing up as a client when wireless uplink is in use.
• [UAP-Gen4/Gen5] Fix a number of kernel crashes to improve stability.
• [UAP-Gen2/Gen3] Fix regulatory data for UK to align with country requirements.
• [U6-IW] Fix incorrect topology when plugged into a UDM-SE or UDR.

Additional information

Please report any issues you encounter with this release using the Report Bug form.

• U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
• Please refer to this article to find more details on how to identify your Access Point generation.
• Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
• All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

• Network Application version.
• Firmware version (previous and current).
• Device model(s).

Download links

UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

U6-Lite | md5sum | sha256sum

U6-LR | md5sum | sha256sum

U6-Pro/Mesh/IW/Extender/Enterprise | md5sum | sha256sum

U-LTE/U-LTE-Pro | md5sum | sha256sum

UAP Firmware 6.2.19

https://community.ui.com/releases/UAP-Firmware-6-2-19/94b7c9bc-a147-4806-82b9-479116d8f185

Overview

Please pay special attention to 2.4GHz IoT devices. We are specifically interested in any devices that have had trouble connecting to APs in recent releases.

Please report any devices that are unable to establish or maintain connectivity on this version. Thanks!

Improvements

• [UAP-Gen2/Gen3] Improve 2.4GHz IoT interoperability.
• [UAP] Improve overall stability by fixing kernel crashes.

Bugfixes

• [U6-LR] Fix ethernet lockup occurring after a network loop.
• [UAP] Fix wireless uplink issues experienced by some users, introduced in 6.2.18

Additional information

Please report any issues you encounter with this release using the Report Bug form.

• U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
• Please refer to this article to find more details on how to identify your Access Point generation.
• Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
• All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

• Network Application version.
• Firmware version (previous and current).
• Device model(s).

Download links

UAP-AC-Lite/LR/Pro/M/M-PRO/IW | md5sum | sha256sum

UAP-HD/SHD/XG/BaseStationXG | md5sum | sha256sum

UAP-nanoHD/IW-HD/FlexHD/BeaconHD | md5sum | sha256sum

U6-Lite | md5sum | sha256sum

U6-LR | md5sum | sha256sum

U6-Pro/Mesh/IW/Extender/Enterprise | md5sum | sha256sum