UniFi Network Application 7.5.165
Overview
- Added ISP/Modem in the Topology.
- Added Switch-related System Logs in its Property Panel.
- Added Ping test option for Clients.
- Added support for adjustable column width for Devices and Client tables.
- Added support for DNS Shield. This requires your UniFi Gateway (Consoles) to run on firmware version 3.2 or newer.
- Added support for IPv4 over IPv6 in Japan using DS-LITE. This requires your UniFi Gateway (Consoles) to run on firmware version 3.2 or newer.
- Added support for FQDN/Hostnames with IPsec Site-to-Site VPNs (Requires UniFi Gateway (Console) 3.2 or newer).
- Improved setup flow for Windows/macOS.
- Improved Dashboard UX.
- Improved Global WiFi Settings UX.
- Improved Traffic Monitor UX.
- Added time estimate when filtering by clients
- Improved filtering and navigation
- Reorganize Firewall and Routing Settings.
Improvements
- Added messaging for missing Windows Firewall rules needed for Device adoption and communication.
- Added confirmation when trying to set Primary/Secondary WAN to ports that are not connected to the Internet.
- Added IPv6 addresses for client devices. This requires your UniFi Gateway (Consoles) to run on firmware version 3.2 or newer.
- Added DFS Scanning status for Access Points.
- Added AP Density widget to the WiFi Coverage page.
- Added 6GHz clients to the Topology.
- Added the Last Seen and Connection type filter on the top bar on the Clients page.
- Added messaging for regions where 6GHz is not (yet) supported.
- Added global IPv6 support in the Network Settings. This requires you to have IPv6 enabled on WAN.
- Added validation for unreachable custom Echo/Internet Verification Servers.
- Added Client Session Time widget to the Client property panel.
- Added support for adding a /32 and /31 to Remote Gateway/Subnets for VPNs. This requires an UniFi (Next-Gen) Gateway Console.
- Added support for opening side panels while staying on the same page. E.g., opening a Client property panel while being on the Dashboard.
- Added validation for checking Honeypot IPs against Fixed IPs from Clients.
- Added Guest authorization by admins in the System Logs.
- Added the "Manage" option to the Profiles settings.
- Added support for running a speed test on WAN2.
- Added additional ESP DH Group Options for Site-to-Site VPNs.
- Added support for re-adopting Wireless Meshed APs that are factory reset via the Reset button.
- Added affected clients to the IP Conflict notification.
- Added the ability to reset the sorting preferences by clicking Restore Defaults on the Devices page.
- Added Device Type filtering to the Device page.
- Automatically enable Wireless Meshing when doing a Wireless Adoption.
- Automatically restore from recovery backup after replacing the HDD on a UCK G2 Plus.
- Improved UniFi Devices table columns.
- Improved Device connection state when adopting Mesh APs after enabling Wireless Meshing.
- Improved STP Discarding UX in the Port Manager.
- Improved feedback for the OpenVPN Configuration File download button.
- Improved auto-backup schedule limits on UniFi Consoles.
- Improved Data Retention options on UniFi Consoles.
- Improved Site-to-Site VPN configuration.
- Improved Voucher creation process.
- Improved Broadcasting AP column in the WiFi Settings.
- Improved searching in Settings.
- Improved Settings section organization.
- Improved AP Group Selection in the WiFi Settings.
- Improved IPv6 Network Settings UX.
- Improved Firewall Rules table UX.
- Improved displaying OpenVPN Server Clients on the Clients page.
- Improved the VPN Creation process by prefilling the name and port.
- Improved Wireless Uplink reporting in the Topology.
- Improved application loading time.
- Improved Device update resiliency by using cached firmware to update a device if the device fails to download the firmware from our servers.
- Updated the packet loss display in the Dashboard Internet Health graph.
- Updated the UniFi Network Device display names.
- Renamed WiFi QoS to WiFi Speed Limit.
- Display the current Connection session in the Clients and Topology pages. This works only for local connections and on unifi.ui.com (Google Chrome only).
- Display email addresses for guests authorized via Facebook authentication.
- Prevent enabling Device Isolation on networks with managed UniFi Devices.
- Prevent offering IP addresses to clients that are configured via a Static IP on UniFi Devices.
- Moved AP Site Settings and Support to Advanced Settings.
- Moved Port Manager to the Overview tab for Switches.
- Bundle Java inside the Application on Windows Network Application Servers.
- Deprecate Facebook-WiFi authorization. Facebook is dropping support for it.
- Enable auto-update for Meshed APs. Previously they would not auto-update.
- Require MongoDB 3.6 or newer. This also drops support for 32-bit systems.
- Require Java 17.
Bugfixes
- Fixed unable to download backups from a Network Application Server via Remote Access.
- Fixed unable to configure switch ports if one of the ports had references to a removed L3 Network.
- Fixed missing Ad Block statistics on the Filtering Activity page.
- Fixed UDM-Pro/UDM-SE would appear offline when Port 11 has Block All option configured in the Restrict Traffic Settings.
- Fixed unable to download backup files from Network Application servers when connected via unifi.ui.com.
- Fixed UID VPN users are unable to reach the Remote subnet over VPN in rare cases.
- Fixed Device discovery when port 1 is disabled on an UniFi Gateway Console.
- Fixed missing + and - buttons on the Traffic map when opening the Application locally.
- Fixed unable to change WAN from Static to DHCP when having a VPN configured.
- Fixed voucher printing via Safari browsers.
- Fixed false positive "Multiple IP Notifications" for UniFi Devices with multiple interfaces.
Additional information
(Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.
- Existing UniFi Network Applications must be on one of the following versions to upgrade directly to this version:
Code
7.5.165 and earlier 7.5.x versions.
7.4.162 and earlier 7.4.x versions.
7.3.84 and earlier 7.3.x versions.
7.2.97 and earlier 7.2.x versions.
7.1.68 and earlier 7.1.x versions.
7.0.26 and earlier 7.0.x versions.
6.5.55 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for a direct upgrade, going back to 3.1.0.UniFi Network Application updates may cause your adopted devices to be re-provision.The UC-CK is not supported as of Network application version 7.3 and newer.
Native Application for UniFi OS specific This is only compatible with the UDM/UDR that run UniFi OS 3.1.6 or newer, don't attempt to install it on any other consoles. Older UniFi OS versions on the UDM/UDR use the regular UniFi OS Network application.
Microsoft Windows specific (when running it as a service) Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.
Debian/Ubuntu/Linux specific For Debian/Ubuntu users installing via our repo, please update your APT source (see HERE).We support MongoDB 3.6 since 5.13.10, older UniFi Network Application versions only support up to MongoDB 3.4.The UniFi Network application requires Java 17 to be installed on the system that runs the application. Java 18 and later are not supported.
Checksums
Code
<strong>f649b045fd5951d9fbe21174d20eacfd *UniFi-installer.exe
898af31b36d4c8d81981a4c8b4c0626a *UniFi-Network-Server.dmg
0cc1b7e01dea4499d7b3d279506ca5d5 *UniFi.unix.zip
29d69cda64c596dca0613191ad2e2ffb *unifi_sysvinit_all.deb
2a6cfc41c0f131d545b0954c04814456 *unifi-uos_sysvinit.deb
392a14291890d0f82d968e1738845a6c *unifi-native_sysvinit.deb
601df32736f41e40a80a3e472450a3e1 *unifi_sh_api
</strong>
Download links
UniFi Network Application for Windows
UniFi Network Application for macOS
UniFi Network Application for Debian/Ubuntu
UniFi Network Application for UniFi OS
UniFi Network Native Application for UniFi OS
UniFi Network Application for unsupported Unix/Linux distros *** DIY / Completely unsupported ***
